In the process laboratory of Metso minerals (Sala) AB, continuous tests have been made with a laboratory unit High-Rate thickener. The tests are made in order to compare three methods of thickening techniques of suspended solids. The three techniques are High-Rate thickening, conventional thickening and lamella thickening. The High-Rate and the conventional trials are based on a continuous method, while the lamella thickener is based on batch trials. Because the lamella thickener is based on batch trials and there were some optimization problems with the adding point of the flocculant at the continuous trials, it was not feasible to compare the lamella thickener with the other two thickener types.

National tests has been carried out in fifth grade since 1996. Spring 2011 is the first year since the start, when it is no longer mandatory for Swedish schools to carry out the tests in fifth grade. Instead the tests will be moved to sixth grade, starting in spring 2012. This thesis investigates what effects the national tests has got on the teachers planning, but also what attitude the educators have to the tests. To solve the subject, teachers that are active in fifth grade and have recently carried out nationel tests in their class, were interviewed.

This master thesis is the documented work of the construction process and testing of a three hour laboratory session in mathematics aimed at high school level students. The purpose of the thesis was to create an interesting laboratory session for the science education center ?The House of Science? that could be used as a part of their regular program directed to schools. The thesis explores the possibilities for how one can construct a laboratory session on the topic ?molecular symmetry? as well as the underlying pedagogical theories used to describe learning processes in creative contexts.

In order to be able to change, to maintain competitiveness as a company in a world where rapid changes is part of the daily life, it is crucial to have knowledge and methods in how to change. One method, originally developed in Finland, is the Change Laboratory. This method is said to be efficient, not only concerning change aspects but also learning, since change and learning in this method is intertwined. This Master Thesis (20p.) tells about the process of conducting a Change Laboratory with a Swedish high-tech company and analyses factors in the process that makes change possible..

The purpose of this study is to examine the importance of a working laboratory in mathematics education, how it influences students? learning and the confidence the teacher has in the laboratory component. Focus has been placed upon the advantages and disadvantages that could follow in the working method.The method used in this essay is qualitative in order to answer all the questions that arise along the way, and in order to use this method in interviews. The interviews that has taken place has been with five class teachers that are currently teaching at a elementary school between the years of 1-5. The purpose of this study has been answered by using its literature and the qualitative method with the class teachers.The results of the research show that teachers express gratitude towards the method in use for mathematics studies.

The aim of this thesis is to study the teaching methods that provide the greatest learning effect for children in grades 6 in the subject of physics. One class was divided into three equal groups, each group was educated in a specific way. The three teaching methods that have been investigated are: film with reflection, laboratory work and traditional lecture- teaching. The research question of the study is: "Which method of three selected, causes the greatest understanding of the properties of air??.

Quality is the main focus in management of all laboratories. Accurate results of the analyses are not only determined by the analytical procedure but also by preanalytical factors. In the total analytical process of clinical specimens, there are many possible preanalytical sources of error. Monetoring of temperature on test samples of the transport boxes is one way to reduce the mistakes in the preanalytical phase.In this study, four laboratories from primary health care were invited to participate. The temperature has been measured on test samples of the transport boxes being delivered to the laboratory.In three cases the temperature remained within the limits, but in the fourth case the temperature varied more than the allowed interval.

This bachelor degree project was carried out at Saab AB Service and Repair, Arboga, Sweden. The objective was to design, construct and implement a new stable and reliable method of measuring the continuous vertical displacement (height) of the military search radar PS861 mounted on a hydraulic powered elevator. The end product needs to be durable enough to be fully operational in the harsh environment of an outdoor elevator shaft and yet as accurate and precise as possible since one of its purposes is to calibrate control equipment. Previously used technique has proven not to meet any of the above mentioned properties.A prototype using a high resolution quadrature output rotary encoder has been developed, allowing a completely digital interface. This new method has been evaluated in laboratory environment where tests have been conducted regarding both reliability and validity.

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

In order to be able to change, to maintain competitiveness as a company in a world where rapid changes is part of the daily life, it is crucial to have knowledge and methods in how to change. One method, originally developed in Finland, is the Change Laboratory. This method is said to be efficient, not only concerning change aspects but also learning, since change and learning in this method is intertwined. This Master Thesis (20p.) tells about the process of conducting a Change Laboratory with a Swedish high-tech company and analyses factors in the process that makes change possible..

The project has been provided by Zenit design group and the goal for this project was tomanufacture and perform tests of a prototype that supersaturates water in a continuous flow ofwater. The project has involved finding and sorting out relevant data in scientific papers, books,communication with foreign manufactures and other platforms for information.The project has resulted in manufacturing of a test rig and an oxygen infuser based onmembrane technology. The test rigs purpose was to perform tests on oxygen infusers fordifferent comparison test and performance benchmarks in a in a laboratory provided by Zenit.The project led to satisfying results using the oxygen infuser manufactured by the authors withcomparable levels of saturation to the reference infuser.The theory behind this project is based on medical research, belonging terms will be explainedbut the authors have chosen to delimit the project from the medical area. The reason for this islack of knowledge in this area and its irrelevance to the mechanical engineering education insuch..

There are two species of potato cyst nematode (PCN), the yellow, Globodera rostochiensis, and the white, Globodera pallida. Each of them can appear in different pathotypes. These are separated by testing the nematode ability to multiply on a number of potato cultivars with different resistance properties. The aim of this project was to examine the virulence of Swedish and foreign PCN populations and to compare two test methods. Biotests are today the only available tests used to study virulence.

This thesis is about sustainability within chemistry, the so-called, green chemistry. With this work  I seek to combine green chemistry with sustainable  development  and find methods for teaching green chemistry in a laboratory environement.  I have designed  and tested two labs with ingredients of green  chemistry and sustainable development in my study. I wanted to determine if my design model  leads to conception for the students. The students have through forms and interviews declared their perspective on the education and their conception. In a laboratory environment the pros of a laboratory way of work should be recognized.

A pavement construction designed to cope with the different type of traffic loads; it is exposed to and at the same time it can resist the effect of the climate. A road structure consists of sub- and superstructure which is divided by a boundary known as terrace. During the construction of unbound layers (base course and sub-base course) in the superstructure, it is always ensured that the material meet the requirements for bearing capacity and the degree of compaction. These parameters are controlled by various Laboratory tests and control methods. To obtain increased knowledge of the material and improve the quality of the compaction in the field, it is necessary to perform Laboratory tests in order to determine material properties.A base course material 0/ 32 mm limestone from Gotland (Hejdeby) was investigated in this study.

Free Space Optics (FSO) has received a great deal of attention lately both in the military and civilian information society due to its potentially high capacity, rapid deployment, portability and high security from deception and jamming. The main issue is that severe weather can have a detrimental impact on the performance, which may result in an inadequate availability. This report contains a feasibility study for an all-optical free-space link intended for short-range communication (200-500 m). Laboratory tests have been performed to evaluate the link design. Field tests were made to investigate availability and error performance under the influence of different weather conditions.