Within all industries, there is a change in working time required; this also includes the construction sector. However, the way construction sectors are differentiated is by not having been given the opportunity to be practiced or tested.  The aim of this thesis that we have done in collaboration with the Concrete Industry was to investigate the possibility of developing an automated method for quality assurance of SKB at the site. The idea is to make the O-funnel to be more utilized and therefore ensuring that the appropriate concrete quality is provided which eventually would lead to a better development in the production process.The project has involved theoretical work and laboratory experiments. The theoretical work gave us a good foundation at the beginning of the project. After gathering the information and material, the laboratory experiments began by SCC in their laboratory in Hammarby. The collected data from the various laboratory tests formed the foundation for trying to relate measurements for consistency of SCC with each other and therefore find out how measurements from O-funnel varies with different concrete mixtures.

Texture is an important soil property and accurate particle size analysis of soil texture is therefore crucial. There are a number of well-established and newly developed methods available for determining soil texture. In order to compare the results of these methods, the differences between them must be determined. The difficulties, problems and differences regarding texture class determination were examined through a study performed on forest soil samples. The study compared different methods (pipette, hydrometer and field methods) and two types of dispersing agents (sodium pyrophosphate and sodium hexametaphosphate (calgon)) commonly used for particle size analysis.

Quality is the main focus in management of all laboratories. Accurate results of the analyses are not only determined by the analytical procedure but also by preanalytical factors. In the total analytical process of clinical specimens, there are many possible preanalytical sources of error. Monetoring of temperature on test samples of the transport boxes is one way to reduce the mistakes in the preanalytical phase.In this study, four laboratories from primary health care were invited to participate. The temperature has been measured on test samples of the transport boxes being delivered to the laboratory.In three cases the temperature remained within the limits, but in the fourth case the temperature varied more than the allowed interval.

X-ray fluorescence (XRF) detection of heavy metals is a cost- and time-effective method for investigation of polluted areas. Compared to laboratory analysis, XRF analysis is limited by high detection limits and uncertainties in some situations. Preparation of samples is known to affect the results of measurements.The purpose of this thesis is to bring a deeper understanding of how different factors affect the results of XRF-analysis. A large number of measurements have been made with the instruments Niton XLt 700 and Niton Xli 700. Results from measurements of lead, zinc and copper have been analysed.This study has shown that a greater moisture content will give a lower measured concentration for the same sample.

This thesis is about sustainability within chemistry, the so-called, green chemistry. With this work  I seek to combine green chemistry with sustainable  development  and find methods for teaching green chemistry in a laboratory environement.  I have designed  and tested two labs with ingredients of green  chemistry and sustainable development in my study. I wanted to determine if my design model  leads to conception for the students. The students have through forms and interviews declared their perspective on the education and their conception. In a laboratory environment the pros of a laboratory way of work should be recognized.

Background ? The last 20 years healthcare has been facing increased demands on efficiency and increased customer satisfaction. This despite reduced resources and increasing demand. These demands are presents in all departments within healthcare organisations, including medical laboratories that currently receive an ever-increasing number of remittances. Laboratory flows are quickly becoming overloaded with samples and related materials.

The purpose of this study is to provide a description of how mathematics teachers in grades 3 choose to work with mathematics and how it affects of student performance in national tests. The categories I will use are outdoor education, textbooks, learning materials and problem solving. Laboratory materials can be everyday materials and educational materials in which pupils have an abstract understanding of the subject. This survey was conducted through interviews and observations. The survey was also conducted in relation to student performance in national math tests.

Influenza is a viral infection that affects global health and economy with its endemic and sometimes pandemic spread. Rapid detection of Influenza viruses enables antiviral use and can bring financial savings. It is also essential for the global surveillance of prevalent Influenza strains. RT-PCR is considered the most specific and sensitive method for detection of Influenza, but Influenza mutates at a high rate and it is therefore crucial that RT-PCR methods are updated regularly.In 2014, Cepheid released their Xpert Flu/RSV XC assay, which can detect Influenza A and B and RSV by multiplex RT-PCR in approximately one hour. The aim of this study was to evaluate this assay at Laboratoriemedicin Västernorrland by using the laboratory?s previous PCR assay for detection of Influenza viruses as reference method.Real-time RT-PCR was used to compare Xpert Flu/RSV XC to the reference method.

The purpose of this study was to evaluate the different substrates that enter the digestion on Sundet wastewater treatment plant for production of biogas.This work have done an analysis of data about the biogasproduction from January 2012 to feburari 2013, this showed that the food substrates has a greater gas production than internal sludge.Through laboratory test the VS, TS and COD values for all the substrates used in the biogas production could be determinded. But the COD-method was less optimal for analysis of fat and food, therefore it optimized the method for fat but due to time constraints, this could not be done on the food substrates..

The purpose of this study is to give a description of how six pedagogues in the third and fourth grade teaches mathematics and which working methods they use. When using the term working methods it is implied that it can for example be outdoors pedagogic, laboratory material, problem solutions et cetera. This material can both be an everyday material or a pedagogical material. The research was carried through by interviews and observations. Six pedagogues were interviewed in two different districts.

The aim of this thesis is to study the teaching methods that provide the greatest learning effect for children in grades 6 in the subject of physics. One class was divided into three equal groups, each group was educated in a specific way. The three teaching methods that have been investigated are: film with reflection, laboratory work and traditional lecture- teaching. The research question of the study is: "Which method of three selected, causes the greatest understanding of the properties of air??.

There is a constant change in the world of school, new curricula and syllabi are made and the view of teaching and learning is changing. The desire to improve maths teaching in Swedish schools is strong, especially by laboratory work. How is it then that several teachers in our schools are still using the traditional way of teaching mathematics, which I consider to be relying a lot on the textbook and work for an automated approach?The purpose of my study is to investigate how three different math teachers on an F-5 school in the southern Stockholm area, choose to work with mathematics and why they choose to work according to a special approach. In order to obtain the information I seek, I have chosen to use the qualitative method to get a better understanding of my results.

PAPRO operates within the Forest Research company and their mission is to develop value-addingindustry solutions. At present there are no good ways for mills to easily test the printing quality on newsprintpaper. There is a great need for a fast way to do this on different paper qualities; with a laboratory-offset press this can be both a time and money saving method. At PAPRO Forest Research, NewZealand, a laboratory offset press has been developed and designed, during the past seven years, concerningthis issue. Earlier projects were made concerning the press, e.g.

The United Nations has, during many years, developed a model for a globally harmonized system for classification and labeling of chemicals, with the aim of it becoming a global standard. This system is implemented in the European Union through the CLP-regulation and is now working parallel to the existing directives until 1st of June 2015, when all the new classifications of substances and mixtures must be completed. The aim of this project was to adjust the laboratory to the new legislation, through inventory of stored chemicals, update the list of chemicals and perform self-classifications of mixtures. The work included handling of about 650 different chemicals with varying hazard classifications and search for information in corporate websites and chemical databases. This resulted in a new and complete list of chemicals stored and used in the laboratory and, in addition, an example of how to make a self classification of a mixture.

Flow measurement is one of the greatest challenges in order to calculate efficiency in hydropower. Most hydropower plants in Sweden use differential pressure methods for flow measurement. These methods are dependent on constant conditions in the waterways. A change in these conditions, like turbine improvements, prevents differential pressure methods to verify efficiency improvements. Since efficiency improvements can?t be verified by one measurement system, another method, which isn?t affected by changing conditions, can be used.