Sökresultat:
1328 Uppsatser om Laboratory materials - Sida 23 av 89
Blood compatibility of biomaterials made of recombinant spider silk
Native spider silk is an attractive lightweight natural polymeric material with a unique combination of strength, extendibility and flexibility. Synthetic, recombinant spider silk is an attractive biomaterial with several possible fields of application.
When a foreign material is introduced to blood, this can for example cause unwanted coagulation and complement activation.
The aim of this study was to investigate if coatings of heparin or albumin could improve the blood compatibility of films of recombinant spider silk and to develop an initial method to do so. Hypothetically, objects like pacemakers, stents and dental implants could be covered with spider silk films of high blood compatibility to reduce potentially harmful foreign body reactions caused by the immune defense. Increased blood compatibility would likely lead to improvements for both the individual patients and the society thanks to reduced load on healthcare institutions.
Our objective was to assess the blood compatibility of both functionalized and non-functionalized recombinant spider silk by evaluating coagulation and activation of the complement system of the immune defense.
Coagulation was evaluated visually on glass slides and complement activation was analyzed by measuring the concentration of the complement system mediator C3a in blood samples that had been exposed to the different materials.
This study introduces a non-toxic and easy performed method of improving the blood compatibility of recombinant spider silk films by adding a heparin coating.
Heparin coated surfaces had statistically significantly higher blood compatibility than uncoated surfaces. The effects of albumin coating of films were less clear compared to the results of heparin coated films.
Complement activation could not be evaluated because of high activation in all samples prior contact with the materials that were included in the study..
Miljösystemanalys av VA-system i omvandlingsområden : fallstudie i Värmdö kommun
Wastewater handling of private sewage systems has become an all increasing matter. In Stockholm region the 90 000 private sewage systems contribute with larger phosphorus flows to the Baltic Sea than the two biggest sewage plants in the area, Henriksdal and Käppala, contribute together, even though these two plants purify wastewater from more than one million inhabitants.
When summer house areas turn into areas for permanent living ? transition areas ? the load on the existing systems increases, systems that already often are unsatisfying. In those areas it is not clear what the best system choice is; On-site systems for single households; Local collective systems or Connection to central systems.
Tillståndsskattning i robotmodell med accelerometrar
The purpose of this report is to evaluate different methods for identifying states in robot models. Both linear and non-linear filters exist among these methods and are compared to each other. Advantages, disadvantages and problems that can occur during tuning and running are presented. Additional measurements from accelerometers are added and their use with above mentioned methods for state estimation is evaluated. The evaluation of methods in this report is mainly based on simulations in Matlab, even though some experiments have been performed on laboratory equipment.The conclusion indicates that simple non-linear models with few states can be more accurately estimated with a Kalman filter than with an extended Kalman filter, as long as only linear measurements are used.
Betydelsen av biologiska aktivitets- och experimentmaterial i förskolan
The purpose of this study was to gain greater knowledge of how preschool teachers and children using an experimental- and activity box in biology. To find this out, I have used the participant observation method and semi-structured interviews since my study is qualitative. The result of the work led to a greater understanding of the biologybox. It was shown that preschool teachers' involvement is very important for children and that the biologybox contained good and inspiring materials. Although educators desired that there was more material to choose from as well as the usage time of the biologybox should be longer than 3 weeks..
"Killarna spelar mest fotboll. Tjejerna leker bara tillsammans hela tiden typ" : ? En studie av barns uppfattning av relationen mellan lek och kön analyserat ur ett genusperspektiv
Abstract The purpose of the study is to examine how children perceive the relation between play and sex and analyse it from a gender perspective. This by answering the questions: "Is the children?s choice of place, materials and company in play dependent on gender?" and "Is there a significant difference between the sexes and/or ages?" The study was done through twelve focusgroup interviews with three children in each group except two groups of two children in each. Eight boys and nine girls of six years old and nine boys and eight girls of nine years old were interviewed. Boys and girls were interviewed in separate groups and the questions were open ended and followed up.
Ett kandidatexamensarbete inom lättviktskonstruktioner .
Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.
Laserskärning i Sverige : ? tekniken, marknaden och hur de utvecklas
Laser for material processing possesses a number of advantages which mean that it has been and will be an important component for a wide range of industries' future development. Cutting materials processing is the dominant use of laser technology and has revolutionized the manufacturing industry. The aim of this thesis is to describe the principles of metal cutting by laser, how laser cutting is applied in practice and to identify how Swedish companies are using laser cutting. For the theoretical and technical description of laser cutting literature studies are the primary source of information. The empirical basis for the mapping of the Swedish industry for laser cutting is grounded on a survey; this includes Swedish companies that use laser cutting in their production.
Bekämpningsmedelsrester i dricksvatten : En undersökning av bekämpningsmedel i 50 enskilda brunnar i Laholms kommun
AbstractThe knowledge about pesticide residue in private wells is not well documented in Sweden.Previous studies have detected pesticide residue in private wells, this issue is what made themunicipality of Laholm commission the study. The purpose was to collect water samples from50 private wells in Laholm and have them analyzed for traces of pesticides. The wells in thestudy are spread geographical over the entire municipality. The analysis of the water sampleswas carried out by the accredited laboratory Eurofins. Nine of the 50 wells in this studycontained residue of pesticides and two of these exceeded the allowed concentration of 0,1 ?g/l.Nine different pesticides were detected, among these were BAM, Atrazin and breakdownproducts from Metribuzin.
Oxygen Health : Inlösning av syre i vatten
The project has been provided by Zenit design group and the goal for this project was tomanufacture and perform tests of a prototype that supersaturates water in a continuous flow ofwater. The project has involved finding and sorting out relevant data in scientific papers, books,communication with foreign manufactures and other platforms for information.The project has resulted in manufacturing of a test rig and an oxygen infuser based onmembrane technology. The test rigs purpose was to perform tests on oxygen infusers fordifferent comparison test and performance benchmarks in a in a laboratory provided by Zenit.The project led to satisfying results using the oxygen infuser manufactured by the authors withcomparable levels of saturation to the reference infuser.The theory behind this project is based on medical research, belonging terms will be explainedbut the authors have chosen to delimit the project from the medical area. The reason for this islack of knowledge in this area and its irrelevance to the mechanical engineering education insuch..
Lärdom och fostran : En vägledning till skolarkiven på landsarkivet i Uppsala
The Regional State Archive in Uppsala [Landsarkivet i Uppsala] has several archives left from various types of educational institutions in the counties of Dalarna, Södermanland, Uppsala, Västmanland and Örebro. This archiv-al guide reveals the main content of some of the school archives. It goes through the archives of the elementary school, state secondary grammar schools and private secondary grammar schools. A few special schools for the blind and the deaf children are included. The essay also brings up records from community homes and reformato-ries for children and young adults who experienced certain difficulties and therefore could not adjust to the ordi-nary educational system.
Satsa på leken! : en studie om skolgårdens betydelse för barns lek och utveckling
The intention of this final thesis is to examine how to create a schoolyard that inspires children at the age of 6 ? 12 years to play and give them possibility to develop. To get a lot of knowledge in this subject, I have combined studies of literature with practical studies at Hosjöskolan in Falun. During my practical studies I have done interviews, walks in the area with the children and visited other schoolyards. I have based a design proposal for the schoolyard of Hosjöskolan on these studies.
Förbättrad vakuumtätning mot kabeln under plastextruderingsprocessen
This thesis is about developing a design that provides improved vacuum seal between a lead coating and a plastic coating during plastic extrusion processes of cables. This report is a part of the course MSGC 17 for Bachelor Engineers in mechanical engineering.The work is performed at Nexans Norway AS in Halden where they have a production of high voltage cables for sea-, and offshore industry. A problem they face is that they do not get enough good seal at the attachment to the plastic extrusion machine. They want to achieve a vacuum between a lead coating on the cable and a plastic coating of the cable for plastic extrusion, which is something they do not achieve today. The thesis is thus to come up with a design that provides better sealing against the cable.The work involves a construction part with the phases of product development processes.
Mot en effektiv data- och informationshantering på SiCell
Denna projektrapport är avsedd att vara ett hjälpmedel för SiCell, en del av SciLifeLab Uppsala som ska bli Europas första plattform för enkelcellgenomik till hösten 2013. SiCell har bett projektgruppen om undersökningar gällande ett Laboratory Information Management System, LIMS. På svenska ett datahanteringsystem för laboratorier. Ett sådant system skulle kunna effektivisera SiCells verksamhet. Undersökningarna har resulterat i en kravspecifikation som ett LIMS för SiCell ska uppfylla och en sammanställning av tillgängliga mjukvaror som bäst uppfyller dessa krav.
Grafisk profil Jönköping Bandy : Visual identity Jönköping Bandy
During the spring of 2013 we developed a visual identity for Jönköping Bandy, a bandy association in Jönköping, which was founded in 1947.Jönköping Bandy?s main problem was the low interest for the association by the local people. The association also had problems with the economy, which made it hard for them to merchandise themselves.In Jönköping, there were a lot of sport associations, and therefore, it was difficult to find sponsors. One way to help the association, was to create a good visual identity for them. A visual identity that would reflect on the proper values of the association.The intention was: ?Through graphical design, we want to convey Jönköping Bandy to a larger amount of people, and get increased knowledge in graphical idiom.? and was torn apart into these three questions:What core values does Jönköping Bandy have, and how can we convey them through the visual identity?Which visual materials does Jönköping Bandy need?How do other teams in Allsvenskan Södra merchandise themselves through their websites?The work began with a study of relevant theoretical literature, with focus on graphical design.
Missuppfattningar inom genetiken: En litteraturstudie om hur missuppfattningar inom genetiken hos h?gstadie- och gymnasieelever kan motverkas
In schools, misconceptions about genetics can arise due to several factors, and the consequences of
these misunderstandings can be significant. Lack of education can play a central role in the spread of
misinformation about genetics. When teachers lack sufficient knowledge or do not have access to
up-to-date resources, they risk inadvertently conveying inaccuracies to students. Additionally, students
own preconceived notions and misinterpretations can be reinforced through interaction with their
peers, creating a vicious cycle of misinformation.
In this study, various misconceptions within genetics education have been identified and analyzed,
while different strategies to prevent these misconceptions have been examined. The study revealed that
the two most common misconceptions are the confusion between "genes" and "DNA" and the
simplified perception of genetic determinism.