Sandvik AB är en högteknologisk verkstadskoncern som omfattar affärsområdena Tooling, Mining and Construction och Materials Technology (SMT). Sandvik Materials Technology är världsledande inom rostfria och höglegerade stål, specialmetaller, motståndsmaterial samt processystem. Inom SMT drivs ett inköps- och råvaruoptimeringsprojekt (IRO) som har målet att minska lagernivåerna av köpskrot och legeringar i råvarulagret på skrotgården. Kapitalbindningen anses i dagsläget vara för hög. Därför är det viktigt att ta reda på hur det interna flödet av returstål ser ut, för att på det sättet kunna förbättra lagerstyrningen.

The purpose of this study was to evaluate the different substrates that enter the digestion on Sundet wastewater treatment plant for production of biogas.This work have done an analysis of data about the biogasproduction from January 2012 to feburari 2013, this showed that the food substrates has a greater gas production than internal sludge.Through laboratory test the VS, TS and COD values for all the substrates used in the biogas production could be determinded. But the COD-method was less optimal for analysis of fat and food, therefore it optimized the method for fat but due to time constraints, this could not be done on the food substrates..

The purpose of this study is to find out how libraries can be user-friendly to people with dyslexia by focusing on how adult dyslectics experience the library. Data were collected through literature and interviews with adult dyslectic students. Two different types of user studies served as a theoretical framework; one was an individual-related study by professor Wilson and the other was a system-related one from professor Buckland. The findings in this study shows that dyslectic library users often experience difficulties when seeking for materials in the library, due to the libraries organisation of material according to the written language. Through technical aid and a more user-friendly organisation of materials it may be easier to find relevant material for dyslectics.

One of the most common ways to produce heat and electricity in Europe today is by the incineration of waste or combustion of coal. These materials can be very sulfurous and during combustion sulfur dioxide is produced. This is an environmental and health related toxic substance which is why power plants have strict regulations on removing it from the flue gas. Sulfur dioxide is removed from the flue gas by adding a limestone reagent. The sulfur dioxide reacts with the limestone and the synthetic product obtained is ?Flue Gas Desulfurization gypsum?.

This study aims to examine the views on digitization of eight respondents, all working at different libraryinstitutions in Sweden, and how their views are reflected in their library's digitization strategies. The poll wasconducted on the basis of Ingrid Mason's theory of information standards, their structure and sociopoliticalnature. The informantion standards are divided into three aspects, curatorial, semantic and technical, and theyaffect selection of, intellectual and physical access to the digitized material, which in the end is what constitutes the digital cultural heritage.The background to the study is that the Swedish library institutions in the current situation lacks a nationalstandard or a common strategy for the digitization of cultural heritage, while it is still implemented digitizationprojects at many library institutions. The method used is qualitative, structured interviews with open-ended questions.The study shows that one of the main motives behind the libraries' digitization projects is to make librarymaterials available in a new way, creating greater opportunities for the users to take advantage of the material.The library users are the ones who mainly control what is digitized, although aspects of preservation ismentioned. Furthermore, it appears that the respondents believe that digitization offers improved capabilities tosearch and learn more about the collections, but the actual work of image capture, the addition of metadata,presentation to users and long-term preservation is very complex.Views on what it is to be digitized, how the material should be selected and provided with metadata and howit should be presented to users is what creates the standards that libraries use when they digitize their materials,and digitization of library materials creates new conditions for new users to access and use library material.This is a two years master?s thesis in Archive, Library and Museum studies..

I am interested in humans, bodies, movements, directions and how they affect each other. How we move towards each other or away from each other, inside a home or outside. How we relate to each other and to what people say and do. Co-operations between people that occasionally, possibly, do not work; how certain relationships, like certain materials, can have various breaking-points; that materials can be laden with numerous preconceptions, for instance what they should be used for.Beginning from the perspective of a feminist commune, I have explored the concepts of family, belonging, and loneliness. I have interviewed, observed, photographed, and through living in the commune during shorter periods of time, I have taken part in their every-day life.

This essay aims to determine how Muslims are produced in the public domain in Swedishcontemporary time. My study is based on three different materials; Hot mot demokrati ochvärdegrund ? en lägesbild från Malmö investigating Islamist radicalism and extremism inRosengård, articles on Omar Mustafa and his resignation from the Social Democratic Partyand Gun Holmertz article Islamismen får allt större fäste i Hjällbo and the following debate.The method used is discourse analysis as the purpose of the study is to examine howMuslims are produced within the prevailing discourse. Theoretical points have beenPostcolonial theory, Orientalism, Islamophobia and ?us? and ?them?.The results of the study confirm the results of earlier studies, namely that Muslims are not produced in a beneficial way.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

The purpose in this Bachelor degree project has been to create a visual identity and to design a compilation cassette for the small music distributor Kyrkvägen Kassett. My way of approaching the task has been to draw parallells between the cassette as an obsolete music format and more or less abandoned or anachronistic formats, materials and printing methods in the graphic design area. The result is a visual identity that is built upon materials and methods of production rather than specific visual elements. The work is to be seen as a tribute to the small non-profit producers of music and graphic design. As often done in the DIY movement, I chose to consider my lack of practical knowledge in these fields not as an encumbrance but as an asset and an incentive.

During the spring semester of 2012 did Petra Hollsten independently a thesis on reducing the environmental impact of capsule for coffee, tea and chocolate. The work was performed at Karlstad University, Faculty of Technology and Science under the Bachelor of Science program in innovation, technology and design. The project's scope is at 22.5 points.The employment for this project is the company Löfbergs Lila AB in Karlstad. Supervisor at the Principal has been Maria Herou Wallner and Sandra Lyxell, product managers. Supervisor at Karlstad University is Monica Jakobsson, lecturer and program leader for innovation and design engineering program.

AbstractThe aim of this examination paper is to get an overview on the ?no-maintenance? windowsthat exist on the Swedish market, like plastic and aluminium windows.By way of introduction the reader gets knowledge in the background and problemformulatethat this subject has. This introduction explains why it has become so popular to changeyour windows into plastic- and aluminium windows and there is an existing scepticismagainst PVC and aluminium as construction material for windows.The main part of this report is constructed by segments of interviews where bothproducers of windows and stakeholders gets to answer questions about their viewing onno-maintenance windows from a material and construction point of view and where theproduction is headed to in the future. This is followed by an evaluation of a questionnaireon how pleased the house owners that changed their old windows to no-maintenancewindows are, followed by an inspection of windows made up from wood and an aluminiumclothing, windows made from only aluminium and PVC-based windows. It ends with atheory part about the materials PVC and metal based upon facts included in literature.By reading this report you can draw the conclusion that no window can be entirely nonmaintenancebut that the materials PVC and aluminium still are good substitutes for woodto lessen the maintenance..

The energy consumption continues to increase as the use of electronics and energy consuming equipment increases. The use of fossil fuels has to be phased out for this to be sustainable in the long run while the use of renewable energy continues to increase. A renewable energy source is solar energy but the production of heat and electricity are today very expensive compared to other energy sources and an important task for the solar energy market to grow is therefore to minimize the production cost of the solar collectors while increasing its efficiency to produce heat and/or electricity. One way to convert solar energy into heat is by using solar collectors and electricity can be produced by utilizing the produced heat, or by applying solar cells.This thesis aims to recommend a reflective material for the next generation solar collectors from Absolicon and to recommend a commercially available coating for the receiver tube of the solar collector. A market study has been carried out to investigate the cost-related aspects along with the optical and durable aspects for the optical material of the solar collector.

The question formulation in the essay brought up whether Clas Ohlson works today with their graphical productionflow and if that way of working leads to a desirable result in press. After a dialogue with Clas Ohlson it emerged thatthey had certain problems with the material that came out of the printing presses. Certain colours were not reproducedaccording to the stated values that had been developed. In March -08 an analysis of the graphical production flowspresent situation were done at Clas Ohlsons in order to find out how they worked with their production of print materials.In the analysis, their way to work with color spaces, displays, ICC-profiles, PDF-exports, pictures and printerswere examined. Occasional interviews were also implemented with responsible personnel about how they worked withdifferent aspects.Deficiencies were found on almost all examined parts in their graphical production flow.

The main purpose with this study is to describe teachers? use of textbooks and other teaching materials in upper secondary school (gymnasiet) in Sweden, and to discuss the use according to school subject and teacher style. Data was collected in two different ways. At first twenty classroom observations were made during lectures concerning the subjects Swedish (mothertounge), English (foreign language) and religion. Then four open interviews were carried out with the teaching teachers.