The last few decades the development in the field of electronics has been huge. The components performance gets better at the same time as the manufacturing cost decreases. Many of the design moments that have to be done, are done automatically today, but it can get better. Especially for analog circuit design.At Electronic System in Linköpings universitet, research is in progress to develop a tool that can design analog circuits in reasonable time. It means that it has to size the components (transistors, resistances, capacitances etc), so that the circuit can fulfill the performance requirements.

Many students in the Swedish and Norwegian compulsory school do not have quali­fi­cation to search for further education. There is a large part of those pupils who have a different native language than the country?s majority language. These students? possi­bi­lities to a fair and equal education is regulated in national laws and regulations of school activity, the so-called governing documents. The purpose of this study is to compare Norwegian and Swedish governing docu­ments regarding education for pupils with another native language.

The proponents for conscience wants to get a clause that will allow the health professionals to due. scruples waive certain duties. Swedens decision makers has despite pressure from the Christian De-mocrats and the Sweden Democrats decided not to implement freedom of conscience in health care. The purpose of this paper is to investigate whether Sweden has the obligation to provide for freedom of conscience in health care. Furthermore, it must be examined, whose rights according to the law will go first, health professionals right to freedom of conscience or the patient right to equal treat-ment.

This thesis provides a good introduction to the American environmental certification system LEED, Leadership in Energy and Environmental Design, and trough compar-isons between Sweden and the United States an explanation to the systems design is given. The work is closely linked to a LEED Core & Shell project in Stockholm, Swe-den, where the goal is to reach the second highest rating in LEED - Gold.This thesis gives a broad description of the LEED system and a more profound study of the energy sector, Energy and Atmosphere. Here, for example, an analysis has been made of how the energy consumption of an imaginary building designed according to the requirements of the BBR (Swedish building code) performs in comparison to the Baseline building in LEED.The existing model of Borgarfjord 3, which served as a case study in this work, has al-so been modified to investigate the energy savings that could have been achieved by adding extra insulation to the building. A description of the problems, regarding how the Swedish district heating system (DES) is treated in LEED, is given as well as the suggested modifications. This is an issue that will be pursued during the process of shaping a new, international, version of LEED due to be launched 2012..

Lean is a production philosophy which is about increased resource use while meeting customer requirements. The foundation of lean comes from Toyota and their production philosophy The Toyota Way. Professor Jeffrey k. Liker has worked with Toyota's production philosophy and Lean for a long time and has created a 4 P model and 14 principles that characterize the Toyota production system (TPS), which many sources refer to.The aim of my work is to study the working procedure of asphalt projects from sales to the laid asphalt with a focus on planning and production management. The goal is to examine how the lean philosophy can be applied in planning and production to simplify the flow of asphalt projects based on Likers model and principles.

From policy to practice - a study of textile companies view about challenges with implementing CSR policies examine the textile companies awareness of which challenges there are with the implementation of codes of conduct in a global supply chain, as well as to analyze how the companies deal with the challenges. With increased globalization many companies have chosen to outsource entire or parts of the production in various developing and newly industrialized countries. However, the working conditions in these countries do not always fulfill the labor standards that are defined in various conventions. The society began demanding companies to take social responsibility. The social responsibility goes under the term Corporate social responsibility (CSR).

This paper explores the accessibility for patrons with different physical disabilities in regards to materials, service, the library building and its website at two typical, medium-sized public libraries in Sweden.The case study is based on interviews, observations, and document and literature studies. As a theoretical framework for this study, Buckland?s model of information barriers is used to describe, discuss and evaluate how the two libraries work with accessibility. In addition, international and national guidelines are used to measure whether additional actions are required of the libraries to improve the accessibility.The results show that both libraries are well suited in various respects to provide for the different needs and the requirements of patrons with physical disabilities. Some obstacles still exist in both libraries, especially in the lack of literature in accessible formats in different languages.

Gtherm is an innovation company who has an unique air heat exchanger underdevelopment. The purpose of this thesis is to provide data of suitable motors for theheat exchanger and to find suitable motor suppliers.A motor specification was designed. It is an important basis for the search of suitablemotors. A compilation was made of nine motor suppliers and the suitable motorsfrom those. The compilation can be used by GTherm in their choice of suppliers andmotors.The compilation of the demands on the motor and analysis of suppliers indicated thatthere were no standard motors available to GTherms air heat exchanger.

CML Data AB is a small IT-company that offers complete IT-solutions adjusted to the needs of the customers. It is hard for the employees to bring all necessary papers, files and software when visiting a customer. They also have difficulties planning their daily work and to keep track of each other, because of the lack of a shared calendar.The purpose of this report is to answer the following questions:- How do you develop a centralized information system for CML Data AB where it is possible for the employees to gain access to files, plan their days and where the customers can get access to relevant information?- How do you develop an information system that is easy to manage?- How do you make it easier for the employees at CML Data AB to update their homepage?We discussed the problems and the future information system with the employees and were able to establish a set of needs and requirements which we then used as a foundation during the software development. We used user centered system design during the whole process and focused a lot on usability and interaction design.The project resulted in a stylistically pure and user friendly portal.

?The new labour party? A study of the labor-market policy ideas of the Moderata samlingspartiet and their ideological change?Thesis in Political Science (C-level) at Karlstad University byJenny Ljung, Fall 2006Tutor: Susan MartonThe labour-market policy of the Swedish Moderaterna may have undergone changes in the liberal ideology. During the election the year 1991 Moderaterna focused upon questions that concerned the economic growth and the free market. In the election at year 2006 Moderaterna appointed themselves as ?the new labour party? and were called social liberals by several critiques.

This MSc thesis is divided into two parts. The first part deals with the need for information from forest campartments selected for clear cutting, in connection with planning in an integrated forest- and sawmill enterprise. A review of literature is followed by a case stud y, where present conditions in a Swedish forest company are compared with current research in the area. The seeond part consists of a simulation stud y, which aims at camparing the accuracy of inventory estimates using different methods. The estimates are delivery forecasts, covering one month consumptian of timber in a large sawmill.

Development and construction of an electronic Breakout box is the main work for this thesis. The box is a part of a test system for the component Fuel Flow Transmitter and should convert signals to be suitable for a frequency counter. A previously constructed Breakoutbox for this purpose is being old and needed to be recreated. So SAAB Aerotech, Aircraft services, the company for the thesis work wanted to construct a new, more sustainable Breakoutbox adapted to a more modern technology. The signals to the box comes from the transmitter and should be converted to suitable signals for a frequency counter so it can show pulse and time difference between the signals.

Den här rapporten redogör för utveckling, design och sömnadskonstruktion för en sadelpadd. Rapportens ämne valdes för att jag fann det intressant och har själv stort intresse för hästar och produktutveckling. Fokus på rapporten låg på att ta fram en fungerade prototyp som testades av hästägare för att se om en distansväv skulle klara av att vara det stötdämpande och tryckutjämnande materialet i en sadelpadd. Rapporten och utvecklingen av rapporten bygger på en enkätundersökning och några intervjuer med relevanta personer insatta i ämnena sadelpadd och ryggskador hos hästar. Utifrån den insamlade informationen från de intervjuade och de som svarade på enkäten samt tidgare skrivna källor gjordes en studie i hästars uppkomst av ryggbesvär.

The insurance industryis challengedby major changesthrough internationalizationand thusgrowingcompetitionwithmore optionsand greater availabilityfor customers.Solvency II, a new regulatoryframework and anew standard forinsurance companies,is therefore implemented in a steptowardsa more competitive Europeaninsurancemarket. Solvency II will result in extensive structural changes for many insurance companies. Newstandards andinternal models must also be implemented by the companies. Solvency IIhasa tightening effect on thesolvency capital requirements forinsurance companies. At the same time it also leads tomajor changesandincreased demandon risk management andinternal control, alongside with demands fordisclosure of informationto the market.

One of the big challenges for the European Union today lies in finding a common foreign policy for its 27 sovereign member states with their divided interests, experiences and traditions. New objectives set requirements on the Union to develop and intensify its military ability. The European Union´s view on when military force can be utilized sets concepts like sovereignty and intervention in focus. Can sovereignty be limited and if so can an intervention be justified? How did the Union argue regarding its participation in the intervention in Afghanistan, 2001? The Just War Theory gives the essay a normative framework against which to assess the Union´s view and guidelines for the use of military capabilities.