This report will point out the income for a scania plant production farm, this has been estimated through a case study. The outcome of this report will later be used to calculate a reasonable leasehold charge. This case study is solitary based upon this particular studied farm, at this very point, and can therefore not be used as a general guide. The reason why this particular scania plant production farm has been selected, is because the author is born and raised at the farm and has the intention to run the farm in the future. The chosen farm for this report is based in the southwest of scania and cover 300 hectare of plant production. The crop rotation consists of autumn wheat, sugar beats, spring wheat, spring barely, winter rape and fallow. The farm owns all machinery required.

The idea to develop  a platform for a PID-controller came from the need to control the temperature in  an espresso machine in a more exact way than a thermostat could perform. In discussions with Syntronic AB the idea developed into PID-control for industrial use. Syntronic AB suggested that the platform should be based on a commercially available processor module to shorten the development time. The suggestion included the use of the microcomputer Raspberry Pi, which supports USB, HDMI, memory card and Ethernet.The work began with establishing a schedule for the 10 weeks of the projects duration, and after that a system specification listing all functions, implementation and limitations was made. When the foundation of the system specification was done, a preliminary system design took shape.Because of the Raspberry Pi´s lack of Analog-to-Digital converter, a circuit board containing Wheatstone bridges, differential amplifiers and a two channel Analog-to-Digital converter was fabricated.

AbstractBackground:There are three diffrent postpartum problems a woman can suffer after a childbirth, postpartum blues that is the mildest one that almost everyone are suffering. Postpartum depression that is substantial and above 10-15 % are suffering, the most servere is postpartumpsychosis that 1-2 women per 1000 deliveries are suffering from. Aim: Illustrate womens experience during and after a postpartumpsychosis. Methods: This is a literary review of scientific articel and biographies, they are analysed with latent content analysis. Results: Six themes were found after the literature review; experience of; ?unnatural frame of mind?, loss of controll, loneliness, feeling guilt, living with a label and fear that there will be a recurrence.

This essay is divided in several different parts, but all are tied up together by a fact that we want to increase productivity. We hope to do that by programming the PLC and to reach this with a better security for the person how are going to handle the cutting machine under it?s cutting process. We should as well look for some other ways to come up with better instructions and way to work and handle yourself during work. This programming is done in GRAPH7.

 AbstractThis Master?s thesis analyses the dynamics of the medieval counterweight lever engine, ortrebuchet, a type of mechanical artillery. The purpose is to study the differences between different types of these machines, and see if computer simulations can be used to validate preserved advice on construction. Simulations include machines with a fixed counterweight, a hinged counterweight and a combination of both counterweights.Due to the almost complete lack of archaeological finds and insufficient historical source material there are still, after more than a century of research, many unanswered questions concerning the design and performance of these machines.The present study is based on an analysis by Jahsman (2004). A more detailed mathematical model employing Coulomb-friction is used.

The sludgebark and to a certain extent the bark were until a decade ago waste products without any economic value that were thrown away. A number of environmental laws and increcing energy prices have improved the prerequisites for increasing the use of these materials. At Seskarö sawmill they burn the sludgebark and a great deal of the bark in the sawmill furnace. The sludgebark has a number of disadvantages compared to bark during burning. The sludgebark is often wet which means the energy net from burning often gets low.

This thesis work resulted in a template for how the thermal spray process can be controlled through robot programs. The robots today and their programs need to be replaced, therefore a new structure which can be matched with the new robot systems is needed. The work is limited to only concern structured programming on the new robots on Thermal Spray Centre (TC) with the programming language Rapid. The basic data for the program was retrieved from interviews with concerned personnel at TC, from studies on process parameters for thermal spray and from existing specifications at Volvo Aero Corporation (VAC). The thesis work briefly describes the process thermal spray and the four methods used at VAC.

The most predominant method for forest harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

There are a great possibility to shorten the time between mowing and preservation by spreading of ley crops in connection to the conditioning. In this case the cellular respiration (the plants breeding that consume sugar until the crop is ensiled) should not continue as long and the forage will perhaps get a higher nutritional value. The capacity of the next machine could also be higher because the rake gives swaths with a lot of material. There is also a possibility that spreading of ley crops gives the material a more homogeneous content of dry matter and that gives a reduced growth of clostridium. This is particularly important when the method of harvest doesn?t include any mixing of the material like it does with a round baler or silagewagon.

The purpose with this research is to examine how the green marketing in retail trade can be developed in order to promote the eco-labeled products closer to the consumer.The method for the survey includes interviews with managers of a few retailers and their customers in the industrial sector. The purpose with the interviews was to produce the retailer and the customer?s perspective of products with eco-label on.The research is limited to the region of Västra Götaland.The results from this research indicate that there is a lack of communication between the retailer and the consumer. The consumers don?t think that the product is available.

This thesis describes how a cost reduction project was done on the Packsize ondemand packing machine EM7. The cost reduction was achieved by making minorredesigns of the EM7.The project began by studying the EM7´s structure and function by working on itsassembly line. A short literature study on the subject Design for Manufacturing wasalso done.By working on the assembly line and by speaking with staff from production anddevelopment departments, a number of ideas for reducing manufacturing costs arose.Estimations of the potential cost reduction size for each proposal were done incollaboration with vendors and the purchasing department. Based on the size of the cost reduction, technical risk, impact on the assembly lineand the development time the various proposals were ranked. The two highestranked proposals were selected for further development towards finished solutions.One of the ideas that were selected to develop in to a finished solution meant thatsome of the pneumatic valves were replaced with others.

The main purpose of the project was to identify potential environmentally harmful substances which can be leached from rubber asphalt. A method for analysing asphalt was developed and three rubber asphalt materials were analysed after being cryogrinded. One of the materials was also tested in a road machine made for testing of asphalt paving. The particles created in the machine were analysed in the same manner as the cryogrinded asphalt materials.The asphalt materials were leached by water during 24 hours. The leachates were extracted with dichloromethane, dried with sodium sulphate and concentrated to a small volume.

Holmen Skog is currently using a GPS-program called TraktInfo, originally developed within the company. They are now planning to switch to a new GPSprogram or allowing the contractors to buy other programs available from the logging equipment manufacturers. To be able to offer this flexibility, Holmen Skog needs to obtain information about the features offered by the different manufacturers in their specific programs, and also when the manufacturers are planning to start selling programs adapted to the new standard called StanFord2010. According to the study, the manufacturers are hesitant to StanFord2010 and there has also been a lack of clear signals from the customers and clients about what kind of different new features to include in the programs. The feature most frequently used by forest machine operators today is the option to keep record of the harvester?s path by creating a ?log plot?. This feature was not used to its full potential however, since only one out of eight of the forwarders included in the study had computers that were compatible with the harvester?s computer.

The annual demands for forest fuels increases in Sweden. At present, large unutilized biomass resources is found in young, dense forests from which about five million oven-dry tonnes (ODt) (23 TWh) could annually be extracted as forest fuel. But harvesting small trees give high logging costs and new cost-efficient harvesting techniques are therefore required. The aim was to study the productivity of Vimek 608 BioCombi in forest fuel thinning of Lodgepole pine and to calculate the economy of the harvesting and estimate the thinning quality. The time study was performed in Åmarken in the county of Västerbotten.

Abstract The growth of supra-national organizations, such as the European Union, has been a recent trend in today?s global environment, which has challenged traditional marketing concepts and product cues. One such cue that is significantly challenged is the 'origin cue'. An origin cue is conceived to be a socially constructed notion that consumers use to discern where goods come from and to accordingly evaluate products with. The origin cue is often predominantly materialized in the public sphere by a 'made in' labelling scheme.