This project is an attempt at creating a bag that is both functionaland has an interesting and relevant visual appearance. I have found that a bag that is functional usually have adapted certain aesthetics which are appealing only to a very limited target group. At the same time many bags that are more focused on style can be downright disabling to the carrier. I wanted to create a functional bag, and to explore new functions doing this, while working with aesthetics that stayed relevant and interesting to my target group. The bag was designed for the company Åhléns and their label WERA Stockholm, and theircustomers was the target group.

The number of women in Swedish firms of accountant is not lower then the number of men, but when we compared the number of chartered auditors, the number of women are low compared to men. This is connected to the public debate that is mainly emphasising that there are no differences between men and women and therefore the sexes should be treated equal. The method used is a qualitative study and the primary data was collected through interviews. The respondents consist of members, women as well as men, from eighteen auditors in Malmö and Kristianstad. The result shows that both male and female characters are needed in the work on the firm of accountants.

SRG Carrier Systems AB har tagit fram en ny maskin MPM 160 där MPM står för Multi Purpose Machine. Den är en typ av redskapsbärare i storleken av en skogmaskin som beroende på vad den utrustas med kan fungera som i princip vad som helst. Hytten på denna maskin skall om så önskas alltid kunna stå horisontellt. Detta skall kunna ske automatiskt eller manuellt och tiltningen sker med hjälp av sex stycken hydraulcylindrar.Arbetet i denna rapport avser skapandet av det automatiska systemet. Styrsystemet har skapats i mjukvaran CANmaster från Hydratronics AB.

The purpose of this study is to illustrate how three schools work with special education needs, what they consider is special education needs and what measures they put in for the student to achieve the goals. I will also study how the evaluation and the follow-up of the individualized education program work at the schools.The empirical material consists of all active programs in grades 7, 8 and 9, together with and interviews with special education teachers and the principal at each school. The results are compared with similar previous researches and analysed by two dominant perspectives of school difficulties.The result shows that it is mainly the critical perspective that dominates the individualized education program. The student is the carrier of the problem and is excluded in many cases from the other students in the class. These measures are different compensatory accommodations for the student in order to catch up with other students..

»Does it have to be so green?« is a visual communication project focused on packaging design. I attempted to challenge the clichés of graphic design for organic products and designed a packaging concept for a fictional food brand. The project had a special objec¬tive which was to explore ways to use the package as carrier for in¬formation about the enviromental impact of the packaging itself.The process included research about packaging design and its ef¬fect on the consumer, an investigation of the Swedish market for organic foods, creating and defining a brand, and designing a cohe¬rent packaging concept for a product line which communicates the brand?s values and appeals to the intended target group.The project resulted in prototypes for a muesli package, tea car¬ton and honey jar, as well as a manual that explains the application of the graphic program..

Denna studie bestod i att undersöka situationen på marknaden angående framdriftsanläggningar för LNG-tankfartyg. Syftet med arbetet var att skapa en relevant bild av hur situationen ser ut idag och genom intervjuer ta reda på hur den kan komma att förändras.Genom en litteraturstudie undersöktes läget på marknaden och utifrån det kunde relevanta frågor utformas. Efter att frågorna hade utformats tog författarna kontakt med olika företag som var anknutna till marknaden för LNG-tankfartyg. Intervjuer med företagen genomfördes och dessa har gjort det möjligt att analysera hur läget kan komma att förändras.Studien har visat att det finns ett system, DFDE, som dominerar fartygsbeställningar i dagsläget. Det finns även nyare system som består av gasdrivna tvåtaktsmotorer som förväntas ta över en del av marknaden.

This study will chart the changeover work, with a standpoint in the SMED-theory, at the company Peter Ernst AB in Värnamo. They are suppliers in plastic moulding industry and delivers to amongst other Saab in Trollhättan and Scania. The company are in a very competitive market, and they have to make manufacturing more efficient and rationalise their costs to be able to compete. A big problem, which the company has identified, is their long changeovers. It brings higher costs, a more stressful work climate and holds back the company from becoming more efficient.Field studies will be conducted on the changeover, which will be observed and filmed.

Heat is distributed to the district heating customers through pipes with water as a heat carrier. The district heating system is complex. To decide what is leakages from the district heating net versus what is the water consumption of the plant, is difficult. Therefore, the purpose of this master thesis is to establish a model where the district heating net?s leakages but also the water consumption of the plant can be followed daily. The project is performed at Vattenfall´s district heating power plant in Uppsala. Information is gathered through discussions, drawings of the plant and guided tours of the plant.

Ett Pure-Car/Truck-Carrier fartyg med kapacitet för 6000 bilar på en har prospekterats. Fartyget skall huvudsakligen gå mellan Ostasien, Europa och Nordamerika.I problemformuleringen beskrivs vilka utmaningar och förutsättningar som har varit, samt lösningsmetoder och begränsningar. Under Analys beskrivs hur tankegångarna har varit mer detaljerat och illustrerat med figurer. Analysen har i stort sett gjorts i den ordning som underrubrikerna följer. Nästan alla beräkningar är gjorda i MATLAB enligt kända metoder; många hänvisningar görs till respektive metod och MATLAB-kod som återfinnes i bilagorna.

Respiratory infections are one of the major causes of disease in sheep throughout the world. In the beginning of 2008 the Swedish National Veterinary Institute and the Swedish Animal Health Service together started a project about respiratory infections in Swedish sheep. This study is an initial part of that project and the aim of this study was to investigate different sampling possibilities with focus on nasal swabs. This study is composed partly of a literature review on causative agents of respiratory infections in sheep and existing sampling methods, and partly of an experimental study comprising 56 sheep. These sheep were sampled with both an ordinary nasal swab and a guarded nasal swab. Before the start of this study there was to our knowledge no described method for sampling sheep with a guarded swab.

Poorly maintained forges are a common sight in the province of Gästrikland. Because of their changed appearance, possible move from the origin location and poor items related knowledge they will rarely qualify for the range of funds available through Länsstyrelsen. Therefore this study deals with the problems associated with the forges in southern Gästrikland, i.e. Hedesunda and Österfärnebo parishes.The aim of the study is to increase the items related knowledge of forges and perhaps form the basis for restoration projects in the area. Eleven forges have been examined and the changes they have undergone have been highlighted.A forge was erected on the farm and was used for the households needs such as producing and repairing tools.

This report is the result of a thesis as been implemented during the spring term 2009 atthe University of Gävle.The company Bruks produces mobile chippers which are used for chipping loggingslash, roundwood and parts of trees. The chipper is powered by a separate diesel engineand the chipper can be assembled on trucks, trailers or some other carrier vehicles.When the chip has passed the chipper drum, the chip is collected in an integrated binwhich is mounted on the vehicles frame with dumping yokes. When these dumpingyokes were designed they were probably created with large material dimensions. Theaim with the degree project is hence to study the strengths of materials and, if possible,to suggest an arrangement that can decrease the total weight on the dumping yoke onBruks´ mobile chippers 805 CT.The CAD-program Pro/ENGINEER was used during the project for outlining the 2Ddrawings,as distributed of constructors on Bruks, to solid 3D-parts. The three-dimensionalassembly from Pro/ENGINEER was transferred to Pro/MECHANICA.

The aim of our thesis is to study and analyze the components and features a brand should have to provide a solid foundation for brand building. Furthermore, we show how brands can make use of trends in a brand establishment.This paper is written from a qualitative approach. Through both structured and semi structured interviews, we obtained valuable information from our respondents. Our frame of reference and empirical foundation are linked together through an abductive approach which has resulted in our analysis and conclusions.A trend brings with a set of emotional characteristics, which companies can?t influence but must adapt to.

This master thesis deals with the theme of memory, it is through an artistic process I have investigated and peeled off to a specific memory, the hut. It is in the work of the personal memory through a craft process it transforms into something public. The hut is constructed out of corrugated boxes, corrugated boxes casted in clay. To cast an object differs according to me from sculpting the object; it is the function rather than the sensual feeling that is sought after. It is about the clarity and accuracy through the casted object that suggest something vague and indeterminate.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.