Introduction: In 1998, the pension system was changed and the so called PPM system was introduced. The PPM system is partly fund-based, partly distribution-based. There are approximately 700 different investment funds to choose between, at a maximum five for each individual. For persons who are not familiar with the financial market, the choice might be difficult. The lions? part of the investors do not seem to have an active strategy.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

This report is the result of a thesis work in Integrated Product Development, regarding hygienic features in dishwashers and especially disinfection by the use of steam.The thesis is performed at Electrolux Primary Development Dishcare in Stockholm and in collaboration with the Department of Machine Design at the Royal Institute of Technology.The targets of the thesis are to prove the advantages of a technology suitable to implement as a hygienic feature inside a dishwasher and to realize a functional prototype of a differentiated hygienic feature that does not exist on the market today.The process followed to perform the thesis is the process defined for Electrolux Primary Development.The technology chosen for development is disinfection by heating the water on the surface of the dishware, by the use of steam.A number of tests on how steam behaves when injected into the dishwasher tub have been performed, providing the results that have been taken in consideration when designing the prototype.The prototype consists of a pipe system provided with nozzles to eject the steam into the upper parts of the dishwasher. Tests of the final prototype show that thermal disinfection of water in a dedicated area of the tub can be reached within 9 minutes. The operation requires 0,17 liters of water and consumes 0.2kWh..

New method for measuring road quality- A statisticalstudy of the relationship between road quality andsocioeconomic development A new tool with implications for road maintenance has the potential to yield statistical data for road quality in a large number of regions. This thesis investigates the possibility to develop a method, from this data, for evaluating the effects of road quality on socioeconomic development.The thesis is essentially divided into two parts. Part one looks to qualitatively establish the link between socioeconomic development and road quality and the second part focuses on how to develop a method for evaluating the effects of road quality on socioeconomic development. A method was devised using categorical data and a multinomial regression model. This method provides a comprehensive overview of the complex relationship between a variety of different variables.

A big part of assets in companies today consists of their employees knowledge and skills. In today?s society knowledge insensitive companies are increasing. The survival of these companies lie in the knowledge of their employees, which make it of great importance that knowledge transfer is managed properly. Knowledge transfer is important since it makes it possible for co-workers to apply old solutions to new problems that arise, using knowledge that already existing within the organization.

In this paper I have examined how aware teachers are of their influence on pupils development. The method I´ve used are interviews with three teachers and one pupil each aboutMusicality - how do the teachers and pupils look at the concept musicality generally and personally?Influence I- do the teachers believe that their thinking about musicality influence the pupils self-confidence and development?Influence II- do the teachers think that other pedagogues have influenced them in their teaching and thinking?My main results show that both the teachers and the pupils have similar apprehensions as their teachers, which points towards that influence can exist. The basis is however too limited to make any extensive generalizations.The conclusion of the paper is that we have to be aware of how we influence our pupils. They carry this ?knowledge?, whether it is positive or negative, all their life..

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

This report describes the development of a sample loader for my diploma work at Q-linea AB in Uppsala. The sample loader will replace the process of loading fluid samples into Q-linea?s instrument for biomolecule analysis. The earlier process was done by hand and was a time consuming and inefficient task.The work was initiated with a design phase where an overview of the system was created. The sample loader will be receiving text commands from a PC that coordinates all the subsystems like pumps and lasers on the analysis instrument.

This study aims to examine the regard paid to the use of Assistive Technology (AT) when assessing the knowledge of Year 9 pupils with dyslexia in the subject Swedish. A starting point was to examine the knowledge of a group of teachers in the areas of dyslexia and AT. The issues then developed as to which AT a dyslexic pupil is allowed to use in an assessment situation and how the use of these tools affects the assessment. There was an examination of the guidelines that the teacher group can use as support when assessing the knowledge of dyslexic pupils on the basis of AT. The method used was qualitative semi-structured interviews.

In the fall 2011 a new grading scale will be implemented in the Swedish school. A government bill suggests a change of the scale from a three- to a six-point scale. The students will also be graded from the sixth class instead of today?s eighth. From the first year of the compulsory school the pupil will get a written judgment.

This master thesis examines the development of the two earlier independent IR protocols Z39.50 and SR (Search and Retrieve, ISO 10162/10163), now Z39.50/SR, from the beginning of the 80s to 1996 and their functionality in the client/server environment.Z39.50 applications in library systems will allow easy access to information regardless of platform or location. The use of Z39.50 will create a new user environment. Almost all the library systems of the market support the Z39.50 and surprisingly the use of it in Sweden lied on a very low leve! in 1996. This thesis was followed-up by an interview and a questioner among the Swedish Z39.50 users. They could see a huge potential of development concerning the future IR process.

The history of books and libraries in the Philippines starts after the arrival of the Spaniards in 1521. During the Spanish era, most of the libraries were established through the religious orders to support their own religious mission. The Americans came in the beginning of the 20th century and have had a decisive influence on the education system and the development of libraries in the Philippines. For the analysis, I have used the models of Michael H. Harris and Magnus Torstensson in their studies of library development.

This thesis investigates how a developer can move a desktop application to the web environment. The investigation also includes finding out what are the limitations of a web application and what is not possible to move to the web from the desktop. The question is whether there is any functionality that is gained or lost in the web application after the move.A survey has been conducted to find out what types of problems occur when moving an application from desktop to the web. The authors of this thesis have developed two prototypes for a company who wants to move a limited part of their current desktop application to the web in the future. The prototypes have been developed in Silverlight and ASP.NET.The survey has revealed that one of the disadvantages of web applications is the difficulty in working with local files and hardware on the computer.

Eco-design is all about improving products environmental performances throughout the products lifecycle by including the environmental aspect into the product development process. There are a large number of different tools that can be used for this, but there are several factors that can affect which one will be the best to use. Some tools for eco-design takes comprehensive studies and can only be performed by experts, while some tools can be used more time- and cost efficient and with basic knowledge. The choice of tool should be based on the company?s situation.This report describes the research of how the design and furniture company Blå Station could include a tool for eco-design in their product development process.