?A designer rarely works alone?. The first sentence of Jonas Löwgren and Erik Stolterman's chapter on design as a social process made me curious. What if a designer worked alone? What are the actual differences between working on a project alone and as part of a group? How would it influence the creative process? What would be different when coming up with ideas, meeting with clients and setting deadlines? Does the influence of another designer stifle the individual creativity or does it actually nurish it? This paper is written to answer these and other questions as well as take you through the creative process of the production of ?Daddy? - the music video..

On March 1, 2012, Google introduced its new privacy policy which is applicable to all Google services. This means that search history may be saved by Google indefinitely and may also be associated with the specific account during the first 18 months. We assume that few people read this policy and we have hypotheses that a deeper knowledge of the contents of the privacy policy affects how users perceive Google as a company and/or the usage of Google services. In this study, we have conducted surveys at the IT University of Gothenburg, to investigate how many participants that have read or possess some knowledge of the privacy policy. We have found that very few participants claim to have read the privacy policy.

Prosody can be characterized as the rhythm and the melody of speech. Prosodic features convey emotions, thoughts and geographic origins of each individual. Spoken language without prosody would be monotonous, without variations in loudness and rate. Children with cochlear implants perceive speech in a different way than children with normal hearing. Consequently the speech produced by a child with cochlear implants may sound different.The purpose of this study was to examine prosodic skills in Swedish children with cochlear implants and to compare them with the prosodic skills in Swedish children with normal hearing.

Business unit Cylinder at ASSA AB in Eskilstuna are having problem with frictions in their production process. Changes are occurring and older products along with machineries are phased out and transferred to low-cost countries. This opens up possibilities to at a larger extend customize physical flows after production flows. The authors where given the task to analyze the production and find problem areas to improve and to give suggestion on how Business unit Cylinder can work to optimize their production flow.The aim of the thesis work is to come up with suggestions on how to reduce the lead time in production and how the tied up capital can be reduced. In more detail the task included to find problem areas that are counteracting an effective flow, give solutions on new flows for the production of the cylinder core, give suggestions for new stock points for the production and how the production shall be managed and controlled.During the last twelve months ASSA AB has sold over 700 different types of cylinder cores, and the product range is very wide.

The thesis aims at, from a user perspective, examining how a group of industrial researchers understand the information seeking in their every day work. A qualitative method is employed. The empirical material consists of open-ended interviews with in all ten researchers. All of them work at the Swiss-Swedish Technology Company ABB's research laboratory in Västerås. The thesis is based on the opinion that the scientific Knowledge production has become commercialised and that the scientific communication is going through certain changes.

An increasing number of automotive supplier companies are investing in Central and Eastern Europe (CEE) in order to gain cost advantages. This has happened in a rapid pace since many of these countries did not have any foreign direct investments (FDI) at the turn of the century. The problem now is for how long these countries will be able to maintain the low costs. One purpose was to create a model of country advantages for automotive supplier companies when relocating further production to CEE. This dissertation was written in cooperation with the Trelleborg Group.

Den övergripande avsikten med denna uppsats är att försöka ge en nyanserad bild av organisationsreceptet Lean Production. Vidare försöker jag utröna vilka potentiella vinster och risker som kan tänkas uppträda i samband med implementeringen av Lean Healthcare på Universitetssjukhuset i Lund. Utgångspunkten för denna analys är Region Skånes verksamhetsmål gällande personal, patienter och ekonomi. Analysen visar att det inte är helt okontroversiellt eller oproblematiskt att anpassa och införa produktionssystemet. Allvarligast verkar konsekvenserna kunna bli för tillgodoseendet av personalmålen, medan det ser mindre problematiskt ut gällande de ekonomiska målen och patientmålen.

The aim for this thesis was to develop a proposal of documentation, containing rules and procedures, which JernströmOffset needs to acquire the Certified Graphic Production certification. A fundamental part was to study the materialissued by Sveriges Grafiska Mediaförening, to clarify the requirements that must be met to obtain the certification. Therecommendations found in the CGP material must also be considered.Based on the requirements and recommendations of Certified Graphic Production, a mapping of the workflows atJernström Offset was performed. It was done by interviewing employees from different departments at the company,this to get a clear understanding of the operations carried out throughout the production flow and the final qualityfollow-up.During our reviewing process we found that a number of changes, in terms of working environment and practices,must be made at the company. As a result of this we propose some appropriate actions to be implemented.The documentation was finally written, through the requirements and recommendations of Certified GraphicProduction and then applied to Jernström Offset?s work procedures..

Examensarbete C-nivå, Ekonomihögskolan vid Linnéuniversitetet, Ekonomistyrning, Kurskod 2FE90E, VT 2012Författare:Mats Avalvi, Åsa Lind & Rasmus OlhedenHandledare:Elisabeth KjellströmTitel:Lean Production ? Press & Plåtindustri ABBakgrund:Processtyrning handlar om att se och styra en verksamhet utifrån en horisontell värdekedja. Lean production strävar efter att resurseffektivisera flödet och därmed skapa ett mervärde för kunderna och stärka konkurrenskraften. Detta görs genom att minimera allt slöseri med hjälp av Kaizen som innebär att små ständiga förbättringar eftersträvas. För att detta ska kunna lyckas spelar individen en central roll.

This thesis assignment at C-level is focused on calculation models and prediction methodswhish can be used in the stage we call ?prospecting? of possible windmill locations. Thelocation is southeast of Halmstad at the Farm ?Stjernarpsgods?. The rapport has two mainareas directed towards this task.

The construction industry stands as one of the industries in Sweden where most employees tend to encounter accidents. At the same time, the Swedish authority of work environment estimates that there are large numbers of hidden statistics with accidents and incidents that never gets reported. To prevent accidents, the Swedish authority of work environment has decided that every company have to, beside report every accident and major incident to the authority of work environment, keep statistics and evaluate every incident that happens at their places of work.The people responsible for work environment at the Swedish building contractor Peab, believe that it is only a fraction of all incidents happening at their construction sites that actually gets reported. The purpose of this study is to investigate the reason why employees of Peab do not report incidents. By an inquiry and interviews with both craftsmen and office holders at Peab Bygg Öst 1, the employees? attitudes and knowledge have been studied and evaluated.The study shows that the craftsmen´s knowledge of incidents is relatively low.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

The Transport division is responsible for the internal transports on Sandvik MaterialTechnology AB. At the moment there is no clear picture of how the straddle carriers aremoving at the division Primary Products and if it is working in a satisfying way. It isimportant to see the whole picture of the transportation flow so improvements can be made.The purpose of this essay is to survey and analyse the truck flow in a Lean Productionperspective. The essay is delimited to only include straddle carriers transportation ways in thePrimary Products division. To survey the truck flow we have used a method called Walkthrough.This means that we have walked thorough the whole production flow andinterviewed some of the employed on the way to get the necessary information.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

In Europe poplar plantations has been planted for more than one hundred years. In the first plantation was made in 1940. The interest for poplars has since then shifted over the years and has for long periods been very low but is now slowly increasing again. The main reasons why poplars are becoming more interesting are because of their great production potential. Nevertheless, the knowledge of how to mange poplars in Sweden are very low and very little research has been done concerning management of the species. The objective for this study was to; 1) investigate and document experience and results obtained in practical Swedish forestry, 2) to give a fair picture of the perceived advantages and disadvantages that the poplars has for the forestry, 3) document what the foresters that has experience and those who has no experience of poplar plantations thinks about the potential of poplars.