The composing of new standards in the area of machinery safety is a continuous work which aims at writing standards that works as a tool for companies and enables them to control if the fundamental demands of security and health which is prescribed by law are reached. It is optional for the companies to choose if they want to use the standards. This report is written in cooperation with SIS and the study were performed within the technical committee SIS/TK 282. The report aims to investigating if the companies that choose to use standards see any economic advantages due to this work, how these advantages take form and where they originate. The main question formulation is how the profitability among companies that have adjusted their production to machinery safety standards are affected. The study was performed with an initial literature study which aimed at obtaining knowledge and an overview over the subject as well as investigate what former studies had resulted in.

Zambia is a country in Southern Africa where poverty is widespread and the traditional keeping of local poultry therefore plays a crucial role in improving nutrition. Meat and eggs from poultry are important sources of protein but also of income. Improving the poultry production is thereby a method to fight poverty. For poultry, the access to light is an important factor for both growth and egg production. In this paper, the focus is on the traditional village chickens used for both egg and meat production, how they are kept, their health and welfare and if the use of a solar lamp will influence their behaviour, growth and egg production. Three studies were conducted in Chibombo and Choma Districts in Zambia were 17 farmers were interviewed regarding the village chicken management of which six farmers participated in a solar lamp experiment.

Many reports infer that questions of HBT and homophobia are either poorly addressed or not addressed at all in schools today. This study is based on interviews with teachers of students aged 13 to 15. It is an inquiry to the teacher's thoughts about, knowledge of, and sense of responsibility to inform students of the subjects 'Queer', 'HBT', and 'Homophobia'. Who is responsible for educating the students regarding these subjects and what do teachers think about including these subjects in their curriculum? How do the teachers describe their knowledge of the subjects? Do they require further knowledge themselves in order to educate others in a proper way? The study is grounded in queer theories.

This study focuses the development on the protection of landscapes with old industries and how it nowadays is appreciated by the inhabitants. The overall aim of this study is to increase the knowledge about how the so called industrial landscape in Norrköping became a cultural heritage that the citizens want to protect. The study also aims to investigate the citizens´ knowledge about the industrial landscape in Norrköping, and what value they think that the place possesses. Data was collected by an information research and six qualitative interviews. The interviews where analysed by qualitative methods techniques.

Many media buyers annually spend money on advertising which will not be of benefit to their own brand; the fact that consumers confuse from which brand they have heard or seen commercials, comes as news to nobody. The phenomenon of media confusion has however earned much less attention. As a greater part of the total marketing budget is being spent on the media investments, on behalf of the actual advertising production, the more interesting it turns out to maximize the effects of the media expenses. The search for optimization is somewhat practised today by brand managers who are daringly adding a few more media channels to support their TV-campaigns. Buying ad space in TV is nevertheless much more expensive than the radio equivalent.

How can a multi project organisation use Wiki to support improvement of knowledge management and project evaluation to become a learning organisation? The main purpose of this thesis is to give management and employees a better understanding of how Wiki supports knowledge management and project evaluation. The second purpose is to illustrate possible difficulties and pit falls that comes with the implementation of Wiki based learning. The theoretical framework initiates by explaining multi project organizations, then describes Argyris and Schöns theories about organizational learning and learning organizations. The second half of the theory chapter brings up theories about important areas for a learning organization.

Title: A study about conditions for leadership in knowledge-intensive firms.Authors: Cecilia Ekström and Niklas SandbergKeywords: Leadership, knowledge-intensive firm, hierarchies, followers.Background: Leadership is becoming one of our greatest social myths and is considered a total solution for many problems that occur in an organization. The view of leadership is usually from a top-down perspective, which contributes to an often underestimated view of the follower. Just as it is important to understand the leader's view of leadership, it is important to understand how employees view the structure from which the leader derives its legitimacy. The existing conditions in knowledge-intensive firms, such as autonomy, place special demands on the formal leadership.Purpose: The purpose of this study takes an employee perspective, to understand what the conditions are for formal leadership in knowledge-intensive firms.Method: A qualitative research method was used and empirical material was collected through interviews with employees in knowledge-intensive firms. The empirical material was analyzed by the respondents? mental images which were set against the theoretical framework of the thesis.Conclusions: The conditions for formal leadership in knowledge-intensive firms make it advantageous to have a leader with a withdrawn role.

Effektivitet är för många organisationer ett begrepp som förknippas med att utnyttja sina resurser maximalt. Detta är något som även är märkbart inom svenskt skogsbruk, där man idag är mycket mån om att vara resurseffektiv i sin verksamhet. Det finns dock fler innebörder av effektivitet som begrepp. Toyota, med sitt Toyota Production System, och lean production har bevisat att en flödeseffektiv process med kundfokusering kan vara ett framgångsrikt arbetssätt. Denna studie tar upp lean production som teori i svenskt skogsbruk och knyter an denna mot virkesanskaffningsprocessen.

Global warming is one of the most debated environmental issues right now, and it could be argued that it is important to study how the phenomenon is treated in schools. The main purpose of this study is to put students? knowledge about global warming in relation with the control documents for chemistry, biology and physics studies. Interviews have been conducted with six students in the 9th grade. The conclusion of the survey indicates that the students generally have a satisfying knowledge about the phenomenon and that they know how they should behave from an environmental perspective..

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

StoraEnso decided in year 2002 to build a pulp mill in the province of Guangxi, southernChina, and also establish eucalyptus plantations to provide it with raw material. By 2010StoraEnso controls about 90 000 of planned 120 000 ha, out of 75 000 ha is already plantedwith Eucalyptus.By using better genetic material, improve the tending, selecting the sites more careful and byusing a proper fertilization regime StoraEnso hopes to increase the mean annual incrementfrom today?s 25 m3/ha, on bark, to 35 m3/ha. This study is one part in this work to increase themean annual increment in the plantation.This master thesis is the forth in a series, that has followed up a fertilization trial that startedin spring 2006 when the trial was laid out and treatments decided. The aim with the trial is toexamine the production potential of Eucalyptus urophylla in Guangxi, southern China.

In 2005, Outokumpu began to implement its system of continuous improvement, OK> 1, at Avesta Jernverk. OK> 1 has not generated sufficient results on plant KPI:s. The purpose of this study is to identify the understanding,  participation and commitment regarding to OK> 1, and to suggest some actions to make OK> 1 more successful with emphasis on these three aspects. The thesis shall also determine whether there are any differences in the attitude towards OK>1 between Blue Collars and White Collars.The study consisted of a survey, and interviews. The output from these methods were processed and analyzed and finally resulted in a SWOT ? analysis and suggested actions for improving the understanding, participation and commitment towards OK>1.

All companies wants? to be as profitable as possible. The company in question is one of the leaders in it´s field in Sweden. In order to increase profits as much as possible it is important to identify and eliminate eventual quality defect cost as far as possible.This study was performed in Huddig AB, and the purpose of this study is to try to develop a routine for monitoring the quality defect costs, and to improve communication and create feedback between production and aftermarket.In addition to an extensive literature review on quality defect costs most of the work have been conducted at the company. Own observations and interviews have been done with the staff to get a picture of the current situation and to try to come up with improvement proposals.During the study it was proved that much of the quality defect costs in essence, derived from the production, which is seen as positive because it is the easiest part of the company to improve.

Bakgrund: I takt med att konsumenters preferenser har förändrats, har företag fått överge massproduktion till förmån för produktionssystem som bättre avspeglar konsumenternas ökade krav på flexibilitet. Ett sätt för att överbrygga denna utmaning är att implementera lean production. Även om detta sätt att producera på har tydliga fördelar för dagens företag, verkar lean production även kunna medföra problem i avseende på att kombinera med den befintliga, i många fall, traditionella styrningen i företaget. En del av styrningen som verkar vara speciellt svår att kombinera med implementeringen av lean production rör mätningen av produktionen. Vid en närmare granskning visar det sig att det råder vissa motsättningar mellan traditionell mätning och lean production som kan påverka företagets beslutsfattande negativt.