This master?s thesis was performed during the fall of 2006 at Cloetta Fazer AB in Ljungsbro. Cloetta Fazer is the market leader in Scandinavia of manufacturing confectionary and chocolates. The purpose of the project has been to identify causes that impact the quantity of waste in production as well as a cost/benefit analysis of the solutions that can reduce the problem of production waste.The work includes four production lines that are individually designed depending on what kind of product that are produced on the line. By using qualitative and quantitative methods such as focus groups, interviews and observations data has been collected.

Purpose: Exploring the relatively new technology of convolution reverb, to gather knowledge on its limitations when used practically in the production of pop music, and from these findings to learn about applications in other performing arts and sound design. Methodology: This is a case study of creating convolution reverb by doing impulse responses (IR) and then applying them to studio recorded pop music. The empirical data consists of the final song results, notes and journals from during the process and the comparisons, as well as established litterature on acoustics, psycho-acoustics and music production. Results: Convolution reverb can widely and freely be used in the production of music and other audio-based art forms, since our study shows that the result of a well-made impulse response from a particular room is indistinguishable from music that is actually played and recorded in the same space..

As a newly graduated student in construction you rarely have as much knowledge as you wish you had. It is a complicated line of business that requires knowledge and understanding of both technical solutions and interaction between actors. It is impossible to be fully learned and with that much unknown it can be hard to know where to start. This report is one step in the right direction. It contains a planning that contains construction and installations for a one level house in Kiruna with its different choices motivated.

The aim of this two year master thesis is to study the Knowledge production within the field of Textile Studies at Uppsala University, with special focus on the use of artifact documentation as a research method. With domain analysis as a theoretical framework, ontological and epistemological assumptions as well as historical and social aspects are studied in relation to the research process. Qualitative research methods are used, including interviews, observations and text analysis. In the analysis of the knowledge processes in the field, perspectives on tacit knowledge and the concept of documents, are used as a theoretical basis. In the field of Textile Studies, the artifacts are used as one of the main objects of study, along with archival and pictorial sources. The main epistemological assumptions are that artifact analysis is dependent on a knowledge base, where technical handicraft skills, contextual knowledge and practical experience of object observation are the most important qualifications.

The producers of grain in Sweden are facing a rough future. The competition is getting harder all the time, in Sweden, in EU and also from the ?world market?. The producers have to be more efficient and have to have bigger units. Many producers might have to look for new alternative production opportunities.

This report is a literature review that aims to describe marketing contexts for mango production in Kenya. The institutional conditions in the country are not well developed for marketing purposes, which causes many difficulties and problems for the society. In Kenya most mango producers are poor small-scale farmers with limited resources. Mango is a perishable commodity and to keep its value and quality it is essential to have the opportunity to sell the mangos in the right time. Inefficient and undeveloped infrastructure and marketing systems hinders the mangos to reach the market in time though, which causes large losses of produce.The Kenyan mango production has increased during the last decade but due to market losses for the producer, the small-scale farmers? profits have not improved.

The Production Manager at Atlas Copco AB Craelius wants to adopt a lean approach to become more competitive. This thesis is an exploratory study of the subject and what it means for the business activity and its implementation process.The objective is to provide a basic understanding of lean to the company, and what this means for Atlas Copco AB Craelius. The report describes the industrial revolution in brief. This is because the company itself must understand where certain ways of looking at production management is derived from. Furthermore, it provides an understanding of Lean's origins.

Many enterprises have shortcomings in the transfer of information between different departments. Furthermore, routines for maintaining knowledge in order to be able to use this experience in the future are often lacking. Time and resources spent on improving these systems and procedures can provide significant benefits in terms of saved time and reduced costs in the later stages of a project. The benefit of this is not only a greater clarity and a reduced risk of misunderstandings, but also the preservation of knowledge that would otherwise be lost.The aim of this study has been to examine the process of information transfer and the transfer of knowledge between the calculus department and production manager in projects at Erlandsson Bygg i Öst AB. An additional aim was suggestions for improvements in the calculation handover and at the end of a project, where it was possible.The study was primarily conducted through literature studies and interviews.

To value the risk and opportunity for our production in Sweden it is necessary to understand the marketing development for beef cattle production in the world. We have chosen to look at the Brazil beef cattle production. They are one of the biggest producers, have good opportunity to develop further and have a big affect at the world market. The method of our work is to gather information from experts of beef cattle production, located in Brazil. We have also gathered information through studies of literature. The factors that will have a big influence at the Brazil beef cattle production during the upcoming years is more efficient land use, lower age of slaughtering and extended use of feedlot-system. Our conclusion is that the Brazil beef cattle will have a sharp increase during the next five years. The amount of pasture will not change during that time.

Göteborg Energi has a surplus of district heating during spring, summer and fall. The heat surplus is due to a constant production of waste heat from oil refineries and heat from waste incineration over the year. It would be desirable to increase the demand for heat and the uptime for the newly built combined heat and power generation plant, Rya Kraftvärmeverk. One alternative could be to integrate Rya Kraftvärmeverk with a pellet production facility. By producing heat, electricity and pellet in a joint process the energy use can be decreased.

Changes in the environment are affecting the world market, and pressures from several stakeholders? are forcing different enterprises to adjust to the current situation. Farmers? difficult working conditions and environmental impacts of the conventional cotton production in India have been highlighted. The small-scale production that is characterising India?s cotton farmers implies an insufficient competition power.

This study includes a life cycle assessment, LCA, on an ecological produced cotton shirt for the company Reflective Circle, which designs ethical and ecological clothes.Initially were cotton farming and textile production studied to gather basic knowledge about the processes. Since this shirt is being ecological produced in the whole production chain, we studied what an ecological production means, but also how a conventional production works. When this was done we could start to discuss the differences and similarities between the production of the shirt and general conventional production.When the LCA was first initiated, the main focus was on the green house gas emissions from the manure at the cultivation. Thereafter the process steps such as picking, ginning, carding, spinning, weaving and sewing were being studied. The picking is done by hand, but the rest of the processes are handed by machines which consumes energy.

A large part of the time losses in production in modern manufacturing industry are a cause of unplanned interruptions in production. In this essay we have studied the effects of an unplanned interruption in production. The study was performed during one month on a press production line at Volvo Cars Body Components (VCBC) in Olofström. The effects of the interruptions have been studied on the basis of two perspectives of the environment of the production. The study started at the level of automation and was mainly done as a survey of the unplanned interruptions in production.

Cattle production systems are changing to bigger intensified systems with larger numbers of animals per farm and more free range systems while at the same time employing fewer people. Aversive handling has been known to affect cattle production negatively for many years, but lately scientists have started to focus more on what positive effects gentle handling and positive human-cattle interactions may have on beef and dairy production. Fear can cause high stress in production animals and this can contribute to not only reduced production within beef and dairy cattle, but also increased risks for accidents and decreased animal welfare. Therefore, by reducing the fear cattle experience of humans, it could be possible to increase production, decrease accidents and increase the welfare of the animals. Reducing the animals fear and stress can be done by simple means, such as walking and talking calmly around the cattle, associating humans to positive feelings (such as feed) and stroking the cattle?s body regions associated with social grooming.

Title Becoming involved in the planning process - from the construction workers perspective.University/Institution Halmstad UniversityKeywordsEmpowerment through participation, construction workers involvement in decision making in the planning process, knowledge management and communication in the planning process, partnering, human resource managementAimThe aim of this bachelor thesis is to provide knowledge and examine how construction workers perceive involvement in the planning process of partnering projects, what they can contribute and what they get out of the planning process.Methodology The study was conducted with a qualitative approach in the form of semi-structured interviews.          The interview studie consist of 10 interviews with construction workers who are specially educated in participating in the planning process at the company ByggDialog AB.ConclusionAll respondents are positive to be involved in the planning process. The main advantages they can see is that they are able to influence technical solutions and methods that will be used later on in the production. Therefore it is important to consider when construction workers should be involved in the planning process so that they get the chance to influence in this decisions.When it comes to the decision making the construction workers should be involved in the decisions that are related to their tasks in the production such as technical solutions, choice of methods and materials. Their main duties and working hours should be in the production.Involvement in planning does not automatically mean that the construction workers are involved in the decision making, it is up to them how much they participate.