The purpose of the project was to design a furniture collection that can be packed in flatpackages and be assambled by the buyer. The idea is that the assembling will give the furniturean added value. I have tried to create a collection that is easy to produce so that the productwill be cheap for the consumer.The collections aestethic is inspired by Gothenburgs harbour The wide and bearing elementsof the furniture has set much of its expression.Joints has been highlighted details instead of being hidden..

The aim of this study was to compare the effect between the drugs rituximab and infliximab in rheumatoid arthritis (RA). RA is an autoimmune disease that affects the peripheral Joints and is associated with exacerbations. Various immune reactions in the body cause inflammation of the Joints which further results in cartilage and bone damage. The diagnosis is made by the classification system "The 2010 American College of Rheumatology (ACR) / European league against rheumatism (EULAR) classification criteria for rheumatoid arthritis", which is an update of the older system called "The 1987 American College of Rheumatology classification criteria for RA". Approximately 0.5-1% of the population is developing the disease, but it varies slightly between different parts of the world.

This thesis is an evaluation of a new design concept for statorfeets in Gallejaur hydro power plant. Founder of the work is Vattenfall AB Vattenkraft. During the 70- and 80´s nuclear power began to be phased in to the Swedish grid, which meant that hydropower became an important source of rules. The generators began running in so called intermittent operations instead of basic operations, which meant 300-600 start/stop per year instead of one-ten numbers start/stop per year. In order to deal with the thermal forces that arise at every start and stop suppliers began to mount so called sliding Joints, which is to take advantage of these forces and maintain the stator shape.

Sahlgrenska Academyat University of GothenburgDepartment of Internal Medicine and Clinical NutritionAbstractTitle: A vegetarian diet, a possible treatment complement for relief of symptoms ofrheumatoid arthritis? A systematic review.Author: Alexandra Ahlsén and Caroline ForsbergSupervisor: Mette AxelsenExaminer: Anna WinkvistProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: May 22, 2012Background: Rheumatoid arthritis (RA) is a chronic remitting polyarthritis that is relapsing.Symptoms are inflammation of the Joints with pain, stiffness and degradation of joint tissue.In some cases, also other parts of the body are involved. The treatment consists ofmedications to reduce pain, inflammation and degradation of joint tissue. Today, the offerednutritional treatment is primarily focused on meeting energy requirements and nutrient needs.The diet has also been discussed as symptomatic treatment, and one of the factors believed toinfluence the symptoms is meat.Objective: To assess the evidence as to whether a vegetarian diet affects the symptoms ofrheumatoid arthritis, and if so, to suggest how it can be implemented in practical dieteticswork.Search strategy The databases used in the literature search was PubMed, Scopus, and AMED.The search words used were: "rheumatiod arthritis", "vegetarian", "vegan", "diet", "meat" and"animal protein".Selection criteria: Studies investigating a vegetarian diet on the symptoms of RA wereincluded. Only RCT, clinical trial, controlled clinical trial, human studies and original articlesin English or Swedish were included.

The aetiology of osteochondrosis (OC) is known to be complex and multifactorial. The occurrence of bone fragments in Joints and their connection to osteochondral disease are no exception. In the hock and stifle joint of the horse this type of lesion has generally been considered to be of osteochondral origin, while the process behind these fragments in the fetlock joint has been up for discussion. The objective of this study was to determine the frequency and the localisation of OC in Swedish warmblooded horses. In order to do so all radiographs of stifle, hock and fetlock Joints performed on Swedish warmblooded horses during the period of 1992-1999 at Regiondjursjukhuset in Helsingborg were examined and the material was divided into two groups.

Concrete floors have traditionally had no problems with annoying vibrations. However with the demand for larger spans the floors need to be made more slender with a higher degree of utilization and lower mass. Therefore new floors may have problems with vibration serviceability. This thesis studies the vibration characteristics of hollow core slabs. The analysis was made in the finite element program Ansys. The hollow core slab was subjected to a varying force simulating one person walking across the slab.

In this masters thesis we consider a method for experimental identification of the inertial parameters of an industrial robot, using measured torques and joint angles. A dynamic model of the first three Joints of the robot has been identified.To achieve good identification results, it is important to carefully choose the trajectory for the experimental identification. A method to generate trajectories using two suggested design criteria has been used and evaluated using an ABB industrial robot, and one of them yields good identification results..

This paper deals with a taphonomic study of contexts with osteological material of dog (C. familiaris L.) from the Mesolithic and Neolithic of Sweden and Zealand, Denmark. The general aim is to develop and test a method to try to understand the activity behind and define specific archaeological structures. My questions also regards to wether a taphonomic analysis of the material could be used to identify treatments as wrapping and contraction of the dogs, but also dismembering and other preparations of the body. The study focuses on the relation between the space of decomposition, disarti-culation of the Joints, evidence of wall effect, cutmarks, weathering and signs of postdepositional arrangements.The analysis is based on contexts from the materials Hornborgasjön, Vedbæk, Skateholm I and II, Sjöholmen, Ertebølle, Bökeberg, Bredasten, Löddesborg, Bergsvägen and Röekillorna, dating from early Maglemose culture to Neolithic Battle axe culture.The analysis shows that a closer study of taphonomic processes can be used to identify different structures as graves, offerings, religious and non religious contexts or parts of animals, probably put into the ground as waste.

The society of today is largely dependent on electricity and the dependence does not show any signs of declining. Reliability of supply will become increasingly important in the future and it is therefore important to investigate factors affecting the failure rates in electrical components.Sweden was hit by several severe storms during the 00?s. As a result of this many overhead lines in forests were cablified. In urban areas underground cable systems have been the norm for many years.

Background The Shetland Sheepdog is a popular breed of dogs in Sweden. The breed is mostly used as a companion dog and is also popular within certain dog sports such as agility. The Shetland Sheepdog is not included in any breeding programs regarding joint health. The animal insurance company, Agria had recently informed the Swedish Shetland Sheepdog Club (SSSK) that they had noted an increasing number of arthritis in the elbow Joints, therefore they wanted to exclude elbow Joints from the insurance until SSSK started a breeding program against elbow dysplasia. After the start of this study Agria withdrew their demand, but the study went on as planned. Aims of this study The aims of this study was to investigate if there is any data that may show if there is a larger or smaller reason than before to suspect that the breed has a problem with elbow dysplasia and therefore would benefit from a breeding program regarding this.

Utvecklingen av förbandsmetoder är viktigt för att utveckla konstruktionslösningar. Under det senaste decenniet har forskning på limmade förband utförts, främst på inlimning av stålstag och plattstål i limträ. Förhoppningen är att spänningen ska fördelas jämnare i förbandet och att brott ska kunna undvikas. Hypotetiskt sett skulle det kunna göra knutpunker utan synliga förband möjliga vilket även skulle gynna arkitekternas önskemål.Genom en sammanställning av tidigare forskning dras en jämförelse mellan testresultaten och en antagen knutpunkt som belastas av egentyngder och variabla laster. På så sätt kan limmets kapacitet konkretiseras.

Stenebergs sockerbruk is a large log-timber construction, purpose built as a sugar refinery in 1739 and is one of Sweden's oldest industrial buildings constructed entirely out of wood. Despite receiving the status of a listed building (in Swedish: Byggnadsminne) in 1977, there exists today a surprisingly low amount of documentation of the building itself. In order to enhance the existing and lacking building documentation, this case study aims to shed light on the building's log-timber built frame, focusing on how it was constructed, how the long lengths of its walls were handled and what type of joinery and tools were used. A thorough investigation of the building is conducted on site, followed by gathering of information which is then presented through text and illustrations. The findings indicate the orientation of timbers, location of Joints and scarfs as well as tool marks which together contribute to the forming of a basis of understanding of the building's construction..

On average half of the sows in Swedish piglet producing herds are culledannually. A significant portion of the sows are euthanized because of lameness orparalysis. Young sows and gilts are overrepresented in the category of animals,culled due to injuries in the musculoskeletal system. These injuries cause pain tothe animals. Early culling of sows/gilts also have economical consequences forthe producers.

The purpose of the house which is the basis of this report is to be able present itself on the market as a relatively cheap and at the same time a climate friendly choice. The house is supposed to be able to be built anywhere in Sweden and the rest of Scandinavia in a short period of time. This puts demand on what kind of heating system the house can have, since not all places have the geographic advantage of being able to use geothermal or district heating. Therefore the heating system choices will only include those that are not limited by their geographic location. The house will be built in modules which only require the groundwork to be done before the house can be erected. In this report "System solutions for plus or passive-housing" a comprehensive literature search has been conducted as well as a number of calculations.

This is a master degree thesis at Royal Institute of Technology (KTH) betweenÅngpanneföreningen and Programma. KTH is the examiner, Programma is the client andÅngpanneföreningen is mentor for this project.Programma has a product called TM1800 that has problems with EMC; the problem is thatthis product does only pass the CE-check with a small safety margin. This problem can besolved by reducing the radiation from the electric components in the product or by reducing offix base frame. In this degree thesis the focus is only on mechanical redesign.The main problems right now depends on the long distance between the screws, there is anisolating layer on most of the parts and the forces between the Joints are too small. The mainfocus is to solve these three problems.The best solutions are when the whole base frame is more or less redesigned instead of onlyredesigning some of the connection points.