The purpose of this study is to increase the understanding of activities, flows and waste in a company's production process. By performing a value stream analysis, non-value adding activities are identified in a production process and then the suggested improvements that can reduce lead times will be stated. The value-stream mapping identifies the flow of information and the flow of material in a production process and this provides the basis for the identification of non-value adding activities.We conducted the study at Lammhults Möbel AB in Lammhult Sweden, where the production flow of Spira-21 has been investigated. This to identify any non-value adding activities that affect the flow negative and consumes time and money in a non-value adding way.A reasonable approach for the project was taken by studying the methodologies and theories. We conducted interviews and site surveys at Lammhults Möbel AB where the flow of information and material in the production process were investigated.

This report is the result of a thesis work carried out on the Risifrutti production at the company Procordia Food AB. The thesis is at a master level and is the final work for the author to receive a Master of Science in Innovative production at Mälardalen University. The thesis comprises 30 credits and has lasted for 18 weeks. The thesis is mainly a research on whether it is possible to perform an Environmental Value Stream Map (E-VSM) in a food processing industry and an evaluation if the tools E-VSM and Green Performance Map (GPM) are useful in this type of industry. An extra part to this research is to use the results from the E-VSM and give Procordia Food AB information on improvement potentials in the Risifrutti production. The author has found it difficult to collect some of the quantitative data to the E-VSM, mainly regarding energy, but by using the Value Stream Mapping (VSM) tool and other Lean tools the author was able to identify and quantify several wastes in the Risifrutti production. Recommendations for improvements based on these wastes have been given to the company. In the research part of this report the utility of the Value Stream Map, Environmental Value Stream Map and Green Performance Map in a food processing industry have been analyzed. The author has found that the Value Stream Map has been a useful tool since waste and unevenness in the tact of the production has been identified. The Environmental Value Stream Map and the Green Performance Map are also great tools when a company wants to analyze their environmental impact and then invest in environmental improvements. However, no profound energy analyzes has been done in the Risifrutti production because of the lack of energy meters for steam, electricity and compressed air in the production lines..

How affected are the sugar production in Mozambique and Tanzania by EU sugar regime? What does the EU sugar reform constitute in these countries?Using theories regarding free trade and anti-free trade, I am able to answer these questions. The aim of this paper is to study how the various sugar agreements with EU affect the sugar production in Mozambique and Tanzania. Therefore I am using a method called a most similar system design in this comparative case study. The conclusion is that the EU sugar regime is the main reason to how the sugar productions in developing countries are.

The purpose of this report is to survey Swedex AB?s production costs and to gather all info into a manageable calculation tool. This was made by time and motion studies, interviews of the personnel. All factors were gathered into an Excel chart.The calculation was made according to an additional-charge-method that was considered to satisfy Swedex AB?s goal.

FYROM has a long tradition of producing wine. Wine production in FYROM is one of the greatest contributors of the agricultural share of their GDP. The aim of the thesis is to see if the wine production in FYROM has a comparative advantage compared to other countries that produce wine and if FYROM is able to sustain the advantage in the future. The countries chosen for comparison are Bulgaria, Croatia, France and Italy. The methods used in the thesis are the Balassa Index and Porter?s Diamond of National Advantage.

This thesis studies path generation for industrial robots of six degrees of freedom. A path is defined by connection of simple geometrical objects like arcs and straight lines. About each point at which the objects connect, a region, henceforth called a zone, is defined in which deviation from the defined path is permitted. The zone allows the robot to follow the path at a constant speed, but the acceleration needed may vary. Some means of calculating the zone path as to make the acceleration continuous will be presented.

The Swedish processor Findus contracts approximately 500 pea producers annually to secure the company?s supply of green peas for human consumption. A production contract, which has had roughly the same design for decades, regulates the relation between Findus and the pea producers. Agriculture is typically a risky business. The main sources of risk in agricultural production are production risk and price risk.

The purpose of this study is from a case study develop a model that aims to cost effectively improve productivity in a manufacturing production process. The study highlights the importance of having knowledge about customer needs and using a holistic process perspective when improving productivity to identify the relations between the process stations and by this find problems that cause waste and losses in productivity. Tools and methods used to make production more efficient such as single minute exchange of die, spaghetti diagram, 5s and master production schedule is presented an applied in the model to see how these effect costs, productivity etc.Maintenance effects on quality and productivity in a manufacturing company will as well be covered in this thesis. The results and conclusions finally reveals how the process improvement tools, maintenance and production planning for example effects each other and why it is important to establish an attitude in the company where continuous process improvement should be emphasized..

Det fenomen som varit föremål för den här studien är psykosocial arbetsmiljö. Fenomenet har undersökts med inriktning på tillverkningsindustrin och organisationsformen Lean production. Studien syftar till att erhålla en djupare förståelse av hur medarbetarna i den här specifika kontexten upplever den psykosociala arbetsmiljön. De frågeställningar som studien ämnar besvara är:-Vad innebär en god psykosocial arbetsmiljö för medarbetarna i organisationen? -Hur upplever medarbetarna den psykosociala arbetsmiljön i organisationen? Studien genomfördes med ett induktivt förhållningssätt.

The concepts of environmental scanning and Business Intelligence have gained increased interest over the last years in a number of different organisational contexts. The research in this field has mainly been dealing with methods and issues regarding organisation but the aim of environmental scanning, the forming of new perspectives, has been largely ignored. The purpose of this thesis is to study how Swedish joint-stock banks put environmental scanning and Business Intelligence into practice. First a literature study is made to create a background and to explain the different conceptions. Then I describe the different functions of the different services in Swedish joint-stock banks.

This report reflects an examination work performed for Getrag All Wheel Drive AB during the spring of 2005. Among the companies range of products there exists some concern regarding the amount of clamping force and friction on bolted joints caused by the assembly torque.The aim of this project has been to determine if there is a simple way in which to identify and then practically apply testing methods for clamping force and friction through utilization of existing testing equipment.Three separate methods of clamping force and friction determination have been tested in rear drive unit, RDU, at a 30 Nm assembly torque. A fourth and final method, screw elongation with ultrasound, has been used as reference. The methods are:?Torque-Tension test.?Screw elongation with micrometer.?Joint stiffness test.?Screw elongation with ultra sound for reference.The results from tests can be viewed in table below.MethodTorque-TensionMicrometerCs=318 kN/mm Assembled with torque wrenchMicrometerCs=318 kN/mm Assembled on lineUltra-soundCS=311 kN/mm Ultra- soundCS=318 kN/mm Joint stiffnessTheoreticalClamping force-21,8 kN17,6 kN17,3 kN17,6 kN17,1 kN17,3 kNFriction-0,110,1470,1530,1470,1520,149.

Uppsatsen är inriktad på den militära delen i upprorsbekämpning och tar sin utgångspunkt i två stycken militärteoretikers teorier inom ämnet. Teoretikerna är John Mackinlay och David Kilcullen, som under 2009 utkom med varsin ny bok inom området, The Insurgent Archipelago samt The Accidental Guerilla. Den metod som arbetet vilar på är kvalitativ textanalys. Syftet med uppsatsen är att undersöka i vilken utsträckning som teorin och doktrinerna stämmer överrens. Därför har först teoretikernas syn på hur en utifrån kommande intervenerande styrka påverkar lokalbefolkningen analyserats.

Swedish Armed Forces are according to their development planning process taking actions to establish a new joint unit (SWEWOSE), with electronic warfare capability. SWEWOSÉ S main task will be designated to produce electronic warfare libraries for electronic warfare systems within the armed forces. The unit shall have capability to support with libraries in any state of conflict situation even if the supported unit with library needs conducting operations abroad.This essay examines the requirements that justify the establishment of a new unit in times when the armed forces conducting reorganizations and cutbacks in both economy and personnel.The possibilities to buy complete system solutions from an external supplier are examined. But also what kind of library support model that is to prefer according to the demands that the Swedish Armed Forces desired, in terms of capability in platform protection and battle space awareness.The results show that the demands that the Swedish Armed Forces has decided, best will be ful-filled and justified by a national electronic warfare unit, with library production as a main task..

In ambition to produce more and better harvests, artificial fertilizers are used to produce a better growth of crops in the agriculture landscape. This contributes to leakage of nutrients. Our forests also exhibit a leakage of nutrients. Air pollution contributes to more nutrients. High precipitation with high water flows as a consequence seems currently to occur more frequently in the county of Halland.

The process of producing a video game is one that goes through a number of phasesduring the span of the entire production. One of these phases is the concept design phase,which is part of the pre-production. This phase is an important aspect of the productionas it is where all the different parts and ideas concerning the game are brought togetherto define what the game is going to be. Though a clearly important part of the videogame production surprisingly little research have been done on the subject of conceptdesign. This thesis presents what place concept design has in the overall game productionand how the design process is handled.