The smelting process at Sapa Profiler AB in Sjunnen generates large quantities of waste heat which is absorbed by the cooling water when the aluminum is cooled down. This paper is the result of a Master?s Degree Project aiming to present the conditions for recycling the waste heat. The cooling water absorbs the heat from the aluminum at an average rate of 600 kW and the paper shows that it can be used to replace electrical power consumption for heating the production plant?s facilities.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

The purpose of this essay has been to examine how the city of Helsingborg´s prevention of alcohol and drug use among youths is laid out. It has been of special interest to examine the youth centers (after school programs) preventive work with youths and its effects on frequency of alcohol and narcotics use among youths.The people we have interviewed are all involved in the three organizations: the youth centers, schools, and social services. The results showed that the youth center staff does not think that they work actively preventive against alcohol and narcotics. On the other hand, the staff at the youth centers points out that just keeping the youths in the neighbourhood and making them involved in the activities at the youth center, is preventary work. The staff at the social services points out that it is not the facilities that is part of the preventive work but the activities and the skill of the staff that is improtant for the youths..

2013 a decision was made that all projects at the Swedish Transport Administration shoulduse BIM (Building Information Modeling) to some extent from 2015. BIM is an approachthat allows for streamlining of projects by the use of a 3D-model created in an early stage ofthe project. The 3D-model can carry information about the facility throughout its life cyclefrom planning to management. The use of a 3D-model can help the project to detect errors inearly stages of the project when it is easy and cheap to fix the error instead of finding theerror in the construction phase when it is costly and time consuming to fix it. 3D-models alsolead to improved communication both within the project groups and with the public.

This study deals with a Swedish company in a food industry that got affected by product failure, which led to consumer trust crisis followed by media and was needed to be managed. Situation had a negative impact on company?s trademark, which acquired long recovery work by the company. Study is following a case example of Findus problems with having horse meat in their meat product that was supposed to contain beef meat. Study aims to research how the company dealt with situation, through crisis communication and recovery strategies.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

The tourism industry is growing and with its growth competition between destinations rises. In competition, cooperation and collaboration between tourism operators seem beneficial when creating an attractive and dynamic tourist destination.The purpose of this study is to describe and discuss the significance and influence of tourist related networks at a tourist destination, and therefore this study aims to examine the question: What significance do the tourist related networks have at a tourist destination?This study focuses on seven networks on Gotland that are tourism related, and the representatives of the networks were interviewed in order to get their view on the network and its significance to the destination. The study shows that networks have an important role in creating a unified tourist product of the destination, and in reaching out to the potential visitors through joint destination marketing. The study also shows that the tourism related networks helps to improve the reception of the tourist at a destination and to secure the quality of the tourist destination and its tourist products..

A co-operation is established when a group of people, sharing the same preferences and values, come together in order to satisfy a common need. The co-operative association should be democratic, governed and supervised by its members and open to everyone. The purpose of this article is to, from our ideal type, study similarities and differences regarding the corporate governance of the consumers? and the producers? co-operative movement. The motive behind our choice of alignment is that the mechanisms of corporate governance often are described from the perspective of the joint-stock company, making it valuable and interesting to study these mechanisms from the co-operative point of view.

The main objective of this study was to investigate the possible design of a horticultural therapy program in Swedish correctional treatment facilities. In the USA the use of horticultural therapy in offender rehabilitation is much more frequent compared with Sweden. The aim of these programs typically contains education for inmates. Research has been made indicating that these programs can have positive effects on psychosocial behavior and on vulnerability to substance abuse among incarcerated offenders. In this study the examples of these programs was categorized and analyzed from three perspectives; Vocational, social and therapeutic horticultural programs.

Syftet med uppsatsen är att bedöma om officerare i logistikrollen har liknade uppfattningsom officerare i chefsrollen, avseende vilka interoperabilitetskrav som anses viktiga för attnå ökad effekt i logistikfunktionen i ett internationellt perspektiv. Detta har gjorts med stödav teorin om interoperabilitet samt analyserats med hjälp av en komparativ metod.Avseende den övergripande slutsatsen så talar resultatet för att stora skillnader mellangrupperna har sammantaget inte kunna styrkas. Det finns emellertid skillnader frånundersökningen som indikerar att det råder olika uppfattningar om synen på enstakainteroperabilitetskrav. Det rör sig framförallt om synen på, framgångsfaktorn ledarskap medbetydelsen intellektuell förändring och ?ökat joint tänkande?, principerna flexibilitet- ochenkelhet samt samarbete och koordinering, basfunktionen uthållighet med de ingåendelogistikfunktionerna drivmedel, reparation och materielunderhåll samt reservdelar.Skillnaderna gällde i både fredsbevarande- och fredsframtvingande operationer..

Lameness from the carpus is not unusual in the horse. Multiple soft tissue structures such as tendons, ligaments, the joint capsule and synovial structures can be the originating source. All these structures can be examined with ultrasound, although a description of a systematic examination method is lacking. That is ? which structures, what they look like in an ultrasound examination, how to look at them in the best way, and in what order.

This Thesis in Military Technology deals with experiences drawn from the forced introduction of Weapons Station 01, 2009. The work aims to identify the experiences regarding the forced procurement of military equipment to see how they can develop normal and fast procurement of equipment. The main conclusions of  this work, is to achieve greater capability and increase the military utility, are: -          Common objectives and priorities of stakeholders-          Response and joint types shall determine requirements for system-          Ensure an integrated project team also at lower levels-          Engage the integrated logistic support early in the materiel process-          Include Armed Forces staff as early as possible in the testing and validation-          Prioritize work to facilitate the rapid development of decision on use (BOA)-          Provide back up for increased redundancy in the mission area .

The determination of the optical properties of biological tissue is an important issue in laser medicine. The optical properties define the tissue´s absorption and scattering behaviour, and can be expressed by quantities such as the albedo, the optical thickness and the anisotropy coefficient. During this project, a measurement system for the determination of the optical properties was built up. The system consists of a double integrating sphere set-up to perform the necessary reflection and transmission measurements, and a computer algorithm to calculate the optical properties from the measured data. This algorithm is called Inverse Adding Doubling method, and is based on a one-dimensional transport model.

This Masters' thesis is a study on the information behaviour of hospital personnel at the University Hospital in Lund, Sweden. A questionnaire was distributed to 301 nurses and physicians working in the intensive care unit, the population was reduced to 244 persons. The response rate was 52%, i.e. 125 questionnaires were completed. Nurses constituted 68 % of the population.

Spasticitet, kontrakturer och muskelstelhet kan orsaka nedsatt rörlighet i leder. Ett stort antal behandlingsmetoder för att förbättra rörligheten i leder och muskler används. Resultaten av dessa behandlingsmetoder har visat skiftande verkningsgrad, vilket ökar intresset för att ta fram mer avancerade mätmetoder med ökad tillförlitlighet. Syftet med studien var att reliabilitetstesta en Biodex multijoint system III för mätning av passiv muskelstelhet i vadmuskulaturen. Åtta män (29±5) år och tolv kvinnor (24±3) år, deltog i studien.