The purpose of this paper is to give examples of different ways of economic planning and calculation within agriculcture. My aim is to use a couple of them as an explanation of a case from reality. My choice went to budgetsimulation and balanced scorecard since those are best suited in this specific case. In the information retrieval I present different instruments of economic planning like theory of cost, budget and productcalculation. The budgetsimulation describes how to use the different methods in a long term economic planning. The balanced scorecard is also a model of longand short-term planning but besides the economy planning it?s also a reminder of your personal goals. In the model I have used a dairyfarm as a case.

Wood pellets are an upgraded product of residuals from several wood processing industries, for example saw mills and pulp industries. The pellets are produced by pressing the milled and dried sawdust to cylindrical units with a higher density than the initial raw material. Pellets have great benefits compared to the raw material: high energy per volume, good transport and storage properties and homogeneity. Several parameters collaborate in the whole process, which makes it complex. Wood is a heterogeneous material, chemically and structurally dependent on wood parts, habitat and storage procedures.

Syftet med studien var att med en experimentell design undersöka ifall individens tro på sin förmåga, d.v.s. self-efficacy påverkar utfallet av idrotts prestationer. Detta undersöktes genom att manipulera self-efficacy i en bänkpressövning och därefter mäta eventuella prestationsförändringar under tre sessioner. 21 deltagare (10 kvinnor, 11 män, M = 23, SD = 2.95) med lite eller ingen tidigare erfarenhet av styrketräning deltog. Deltagare delades slumpmässigt in i tre grupper: (LG) lättare vikt än deltagarna trodde, (TG) tyngre vikt än deltagarna trodde och (KG) kontrollgrupp, vikten överensstämde med deltagarnas uppfattning.

This report describes how the system may be exposed to oscillations and how this can lead to resonance. Resonance is a phenomenon that occurs when a system is affected by external periodic oscillations with frequencies close to the system's natural frequencies. Structures subjected to resonance can risk great damage and destruction, why resonance is something that is important to take into account when designing structures. Alternative ways to counteract resonance is to supply damping in the system. Damping means that the resonance decreases instead of letting the amplitude increase.The report discusses some examples on constructions that have experienced the effect of resonance.

To become a successful athlete requires several different components in which one of themost significant is the ability to develop their own physical strenght. What weight exercises has the best transfer effects for skating?Participants in the study were 20 male senior hockey players from Div. II in the Västra Gö- talands Regionen in which all participants had at least 10 years of hockey experience.Test subjects had to perform a five-minute individual warm up followed by an opportunity to familiarize with the upcoming exercise. The first on-ice test was a 35 meters sprint test and the second test was an S-cornering agility test.

I detta examensarbete utförs en jämförelse av HSQ-balkar och VKR- pelare i hållfasthetsklass S355 respektive S460. I arbetet dimensioneras profiler anpassade efter studerade fiktiva konstruktioner och ställs emot varandra. Syftet är att optimera profilerna och effektivisera stålanvändningen. Förhoppningen är att en applicering av höghållfast stål i vanliga konstruktioner medför en reducerad stålmängd. Är minskningen tillräckligt stor bidrar denna i sin tur till en mindre miljöpåverkan samt kostnadseffektiva dimensioneringslösningar.Två olika byggnadsstommar utförda i stål med sträckgränsen 355 respektive 460 MPa undersöks.

The thesis examines the nineteenth century German philosopher and philologist Friedrich Nietzsche?s early notion of how a word is generated in the process of perception. It does so by looking at the ?metaphorical transitions? Nietzsche talks about in the essay ?Über Wahrheit und Lu?ge im außermoralischen Sinne? (?On Truth and Lie in an Extra-MoralSense?). According to the relevant passage in ?On Truth and Lie?? an image is first created as a metaphor for a stimulus and a word is then created as a metaphor for the image.

Fysisk aktivitet kan förebygga och minska åldersrelaterade fysiologiska och psykologiska förändringar. Effekterna av funktionell träning för äldre är dåligt studerat. I Sörmland pågår ett fallpreventionsprojekt som syftar till att halvera antalet höftfrakturer till år 2012. Studiens syfte var att undersöka om äldres balans, benstyrka och self-efficacy, en persons grad av självtillit att utföra en specifik aktivitet framgångsrikt, påverkades av att göra fem uppresningar från sittande till stående två gånger om dagen under fyra veckor. En intervention genomfördes med 23 deltagare på ett servicehus/äldreboende.

This report describes how the system may be exposed to oscillations and how this can lead to resonance. Resonance is a phenomenon that occurs when a system is affected by external periodic oscillations with frequencies close to the system's natural frequencies. Structures subjected to resonance can risk great damage and destruction, why resonance is something that is important to take into account when designing structures. Alternative ways to counteract resonance is to supply damping in the system. Damping means that the resonance decreases instead of letting the amplitude increase.The report discusses some examples on constructions that have experienced the effect of resonance.

Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings.

Bakgrund: Inom forskningen studeras styrkeförhållandet i lårets muskler och anges ofta som flexor/extensor kvot (F/E-kvot). Ett sätt att mäta denna kvot är att använda isokinetiska styrketest.  Forskningen är inte överens om ett optimalt styrkeförhållande i denna muskulatur eller om för stor styrkeskillnad kan ge upphov till skada. Om en optimal kvot kan fastställas är det intressant i ett förebyggande och rehabiliterande syfte.  Syfte: Att beskriva och jämföra F/E-kvoten hos en grupp manliga fotbollsspelare med en grupp fysiskt aktiva män mellan 16 och 25 år. Metod: Mätning av maximal isokinetisk styrka i knäledens flexor och extensormuskler genomfördes med Genesis Single. Resultat: Studien fann en F/E-kvot hos fotbollsspelarna på 78,2 % på höger ben och 77 % på vänster ben.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.