Göteborg Energi has a surplus of district heating during spring, summer and fall. The heat surplus is due to a constant production of waste heat from oil refineries and heat from waste incineration over the year. It would be desirable to increase the demand for heat and the uptime for the newly built combined heat and power generation plant, Rya Kraftvärmeverk. One alternative could be to integrate Rya Kraftvärmeverk with a pellet production facility. By producing heat, electricity and pellet in a joint process the energy use can be decreased.

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

This paper deals with prehistoric charred organic material, interpreted as bread, found in graves and in the underlying settlement at Kalvshälla, Järfälla parish in Uppland. The aim was to categorize the organic material morphologically and with the help of Fourier transformed Infrared spectroscopy (FT-IR) to see whether it was bread or not. Material from 13 graves (dated to Late Roman Iron Age until Viking Age) and 3 finds from the settlement have been analysed. Differences were noted both in shape, porosity and structure. Some of the material has been interpreted as cereal based foodstuff instead of bread due to morphological discrepancies.

This report that is written in cooperation with Peab Sverige AB, studies the information and knowledge management from the production support to the production management. The conclusion of this report is that to have a good and functional information and knowledge management it is necessary that the company has a good way of regain and handling experiences from its projects. The way to do this is to develop the managing system on the production management?s terms. It is also critical to find an easy way for the production management to use the system..

A large part of the time losses in production in modern manufacturing industry are a cause of unplanned interruptions in production. In this essay we have studied the effects of an unplanned interruption in production. The study was performed during one month on a press production line at Volvo Cars Body Components (VCBC) in Olofström. The effects of the interruptions have been studied on the basis of two perspectives of the environment of the production. The study started at the level of automation and was mainly done as a survey of the unplanned interruptions in production.

ABB Capacitors is looking to introduce LEAN within their organization. The purpose of this research is to suggest ways to improve the production planning in order to facilitate the company?s production processes. This should be done in accordance with the LEAN concept.Today, ABB will produce two of the customers? orders at the same time.

The purpose of this study is to investigate how much of the estimated annual electric energy production from Swedish wind power that actually was produced, as well as the history of this agreement over time. The aim is to also examine if there are properties that have caused some group of wind power plants to produce more or less, compared to their estimated production. Operational data on wind turbines collected by the Swedish Energy Agency was analyzed. A survey was made among owners of wind power plants with a nominal power of at least 2 MW. Two different methods for normal year correction of production data were used and compared.

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

This essay is a study regarding the existence of Bronze Ages and Iron Ages battlefields in Scandinavia and the possibility to trace and find them by using the Battlefield Archaeological Method.Based on a theoretical background and results from historical battlefield research and excavation experiences, the discussion deals with some of the problems and possibilities of applying the Battlefield Archaeological Method on older places. The existence of these battlegrounds is also an unknown factor, and a major part of this study is trying to find evidence of their existence. For that purpose I am using as an example a deeper analysis of an Iron Age battlefield archaeological excavation in Germany in order to compare and draw parallels with the Scandinavian society of that time. I am also using the evolution of weaponry, in particular the sword, to show parallels between the Mediterranean and the Scandinavian societies in the matter of warfare and tactics..

The aim of this thesis is to make a comparison between solitary graves and graves in grave fields from the Roman Iron Age on Gotland, Sweden. Differences in burial customs, morphology, dating, gender, age, grave-goods and social status are compared between 19 solitary graves and graves in three different grave fields in different parts of Gotland. An attempt is made to explain these differences and to discuss which functions the solitary graves had. Discussions about whether it is possible to distinguish social status and gender with the help of grave-goods are also made in connection to the determination of status and sex..

The Iron Age cemetery at Tuna in Badelunda parish, Västmanland, is a complex and unique burial ground used for only 69 graves during a period of roughly 700 years, between 300 - 1050 AC. The individuals buried at Tuna show an impressive variety of gravegods as well as stonesettings formed above the grave. Who where these people that were cremated at Tuna, among the mysterious women in the boats and the rich women in grave X? As we study the graves of the cremated individuals we reach a new understanding of the cemetery; from its social structure down to every individual. Through the analysis of the stonesettings, gravegods and bones we see a how these subjects, when analysed, show a picture of the individuals and social structure of the cemetery.

Södra Cell Mörrum is one of the five paper pulp plants that are included in Södra Cell, and the paper pulp that is produced here is not only sold to Swedish paper mills. Most of the paper pulp is exported to different countries in Europe. In the manufacturing process the plant needs different kind of process water and there are guideline values for how much copper, iron and sodium this water is allowed to contain. Analyzes of this water is in the current situation done with an atomic absorption spectrometric instrument (AAS-instrument) with a flame. Measurements done with flame-AAS of samples that have concentrations near the guideline values for copper, iron and sodium, are not reliable. The reason for not being reliable is that the quantitation limits of these metals are higher than the limit values.

This thesis explores the role of gender perspectives in understanding power and power relations in Iron Age burial practices, focusing on two high-status female graves: Grave X from Tuna in Badelunda (Sweden) and the Vix burial (France). Through a comparative analysis of burial contexts, artefacts, and interpretations, the study examines how androcentric frameworks and contemporary gender norms have influenced archaeological discourse. Employing theories of gender, queer studies, and standpoint feminism, the research highlights the limitations of binary gender categorization and advocates for intersectional approaches. The findings challenge traditional stereotypes of passive female roles, emphasizing instead the active agency and complexity of women?s social identities in prehistoric societies..

During the last years commercial Wind Power Turbines (WPT) has become larger regardingto the generator sizes and hub heights. Available hub heights around 100 meters is nowcommon, which has led to profitability for WPT located in forests where there normally are tolow wind speeds. The current knowledgement regarding turbulence and the variation in thewind profile for the outcome of the power production for the WPT in forests is limited.In this Master of Science thesis an investigation concerning forest located wind power plantshas been made. The purpose has been to investigate if plants located in forest perform lesscompared to wind power turbines located at more common locations.The analyses are based on statically material for determining the availability,production/generator size, production/hub height, production/swept area and how thetopography affect the production results.The analyses show that the variation in production result for WPT located in forest comparedto turbines located at other locations is small. The availability is high and the productionresults are good..