Latent heat storage is a way to store thermal energy when a phase change material undergoes a phase change. The advantage of latent heat storage is the capability to store more energy per mass unit than other heat storage methods. The most commonly used phase change in latent heat storage is the transition between solid and liquid. Phase change materials can be divided into organics, inorganics and eutectics.In the Nordic electricity market the price of electricity is set every hour by Nordpool spot, which leads to price fluctuations because of changes in demand. The main goal of this report is to create a latent heat storage system in a single-family home and investigate the possibility to save money by charging the latent heat storage system when the price of electricity is low, and discharge when the price is high.The thermodynamic model consisted of a ?tube-in-tube? heat exchanger with phase change material in the outer tube and water as the heat transfer fluid in the inner tube.

This report aims to describing the work behind the development of a masonry heater.The masonry heater is developed in collaboration with the company Transient Design KB that is a product development company located in Alingsås. The company sees a possibility to cover a market segment where modern technology and design are missing.The report presents those methods and approaches that have been used and gives an overview to how the project has been carried out. It describes how the ideas behind the final results have produced and how they have been developed during the project's time. In the report you can also read about the final concept with its choices of construction and materials.The report is completed with a presentation of a final concept and a ground for possible future production..

This work is a part of the project ?Våtmarker i odlingslandskapet ? uppföljning av miljömålen? (Wetlands in arable land ? following-up of the environmental goals). The main objective with this project is to study nitrogen and phosphorus retention in a constructed wetland by using mass balance calculations. Continuous measurements of nutrients and water flow through the inlet and the outlet of the wetland are made. However, substantial amounts of nitrogen and phosphorus were assumed to reach the wetland with a drain-pipe transporting wastewater from nearby houses (10 persons).

This paper is about cemetaries in a multireligious society. The aim of the work is to compare the physical expressions of different religions burial traditions, in order to plan a multireligious cemetary in Borås. I´ve studied the five worldreligions, Judaism, Chritstianity, Islam, Buddhism and Hinduism. I´ve also written about the Humanism, a nonreligious organization, and funerals without any religious connection. Litterature studies gave basic knowledge about the religions beliefs, and interviews with a person from each group deepend the knowledge, mainly regarding the burial traditions.

In this project, we are studying the material flow and the information flow of sample materials and the appurtenant report of deviation for the purpose to be able to suggest better solutions. The sample material, which is to be analysed, is to be continuously taken from the production flow. The purpose is to navigate the process by the results found by the analysis. Because of this, it's very important that both methods of analysis are ensured and that the sample material is representative for the production flow. However, even more importantly, is that activities and transportations, combined with both flows, must perform in a quick and correct way in order to maintain or improve Höganäs AB's competitive strength.According to reports are about 20 products per day not available, for loading, at the time of delivery.

Swedish films are often based on the genres romance and comedy. The films dealing with relations and comedy can almost be seen as a genre of its own. The composition of the complex relation between the audience and the genre is the primary research focus of this thesis. With the teoretical ground in intertextuality, sociology and romances the thesis examines three relations in three different films. The films english titles are, Adam & Eva, Making Babies, and Double Shift.

The aim of this work is to define the party structure of Feministic Initiative (FI). We want to examine the structure of an organization that doesn?t start out with a hierarchical order. We further intend to examine the party?s leadership; whether or not it is equal, between the three spokespersons.We find it interesting as a topic from a democratic point of view as well as to see if a flat structure could work in practice.

Aspen (Populus tremula L.) and goat willow (Salix caprea L.) are two important tree species in the aspect of nature conservation. Due to the elimination of forest fires, a former negative attitude towards deciduous trees in forestry and a strong herbivore pressure, these tree species have been negatively affected during the last fifty years. The aim of this study was to investigate whether the occurrence of aspen and goat willow could be related to either human impact or to site properties, such as ground moisture and vegetation type. A side study included an inventory of a number of cyanobacterial tree lichens on aspen and goat willow in order to try to relate the occurrence of these lichens species to stand history and stand properties. The study was performed in Hamra State Forest in northern Dalarna. Nature reserves were compared with stands in managed areas.

The Earth and everything else in the universe was created in the Big Bang around 14 billion years ago. A point with tremendous density and mass began to expand and more and more atoms began to form. From the first and lightest like hydrogen and helium to heavier atoms such as iron and eventually gold. The formation of the Earth occurred about 4.6 billion years ago and so the first gold atoms were concentrated only here. It is however believed that much later in Earth's history an extra supply of gold occurred thanks to massive meteorite bombardments.

This report describes the manufacture and control of a flying platform. The report describes the basic and fundamental theories required to get the platform flying. It touches on subjects such as A/D-conversion. PWM-control and PID-control. The sensors used in the platform are a gyro and an accelerometer.

A possible way to reduce pollution and slow down the process of global warming is to increase the usage of renewable energy sources. One of these renewable energy sources is solar power. With the aid of solar panels and solar cells the energy from the sun can be transformed into both heating and electricity. The requirement to use the sun in this fashion is a suitable surface, for example a big roof, an angle between 40-60 degrees and that the surface should be exposed to the south. Almost every farm meets these requirements.

The focus of this project was to characterize the occurrence of ESBL-­?producing bacteria in two irrigation water ponds in Southern Sweden. Samples were taken from two ponds nearby each other, from which analyses were made based on levels of community and individual isolates. Community samples were used for attempts for characterization of resistance patterns in irrigation water using the Omnilog PM-­?plate system. The growth of community microbiota in the presence of the following antibiotic substances was assessed; amikacin, gentamicin, kanamycin, penicillin G, ampicillin, piperacillin, trimethoprim, potassium tellurite and ciprofloxacin. Isolates were pure cultured using semi-­?selective media: LB, Rainbow Agar, mEnterococcus, 0.1 TSA and VRBD. A total of 177 isolates were isolated randomly. Each isolate was identified using the Omnilog GENIII-­?system of biochemical characterization. Further, the isolates were tested on Brilliance ESBL-­?agar for their ability to grow. Out of the total number of isolates, 30 were selected, preferably Enterobacteriaceae or Pseudomonas spp., based on their high similarity to library strain during the identification in the Omnilog-­?system. These were further characterized using Etest-­?sticks. Three selected strains were picked for further analyses using exogenous isolation for attempts to simulate horizontal gene transfer, and Omnilog PM-­?panels containing various antibiotics of interest. Selections of samples were chosen for molecular tests targeting plasmid-­?borne resistance genes CTX-­?M1, CTX-­?M2 and SHV. The method for assessing community-­?resistance patterns showed ambiguous data that was difficult to interpret; further optimization is recommended. For all tested PM-­?plates, generally greatest differences between substances were found among wells with the strongest concentration of antibiotic substance. A total of 175 isolates displayed ability to grow on ESBL-­?agar. Etests confirmed ability of isolates to resist many ?-­?lactam antibiotics and many were clinically resistant to certain substances. No plasmids were transferred during exogenous isolation. During molecular tests, a few matches were found for the CTX-­?M1 gene. Isolates analyzed with Omnilog PM-­?plates showed resistance to most compounds tested. The isolates showed greatest resistance toward penicillin G, ampicillin, amikacin, kanamycin and trimethoprim. In the study, it was established that resistance among bacteria was frequently occurring in the irrigation water, and ?-­?lactamase producing bacteria was very common. Extended studies are needed to assess the frequency-­? and occurrence of horizontal gene transfer (HGF) in this environment. Although some potential corresponding data is found, it is at this point not possible to determine whether the resistances are due to antibiotics used in veterinary medicine, human medicine or one additional reason is travel and trade. in irrigation water using the Omnilog PM-­?plate system. The growth of community microbiota in the presence of the following antibiotic substances was assessed; amikacin, gentamicin, kanamycin, penicillin G, ampicillin, piperacillin, trimethoprim, potassium tellurite and ciprofloxacin. Isolates were pure cultured using semi-­?selective media: LB, Rainbow Agar, mEnterococcus, 0.1 TSA and VRBD. A total of 177 isolates were isolated randomly. Each isolate was identified using the Omnilog GENIII-­?system of biochemical characterization. Further, the isolates were tested on Brilliance ESBL-­?agar for their ability to grow. Out of the total number of isolates, 30 were selected, preferably Enterobacteriaceae or Pseudomonas spp., based on their high similarity to library strain during the identification in the Omnilog-­?system. These were further characterized using Etest-­?sticks. Three selected strains were picked for further analyses using exogenous isolation for attempts to simulate horizontal gene transfer, and Omnilog PM-­?panels containing various antibiotics of interest. Selections of samples were chosen for molecular tests targeting plasmid-­?borne resistance genes CTX-­?M1, CTX-­?M2 and SHV. The method for assessing community-­?resistance patterns showed ambiguous data that was difficult to interpret; further optimization is recommended. For all tested PM-­?plates, generally greatest differences between substances were found among wells with the strongest concentration of antibiotic substance. A total of 175 isolates displayed ability to grow on ESBL-­?agar. Etests confirmed ability of isolates to resist many ?-­?lactam antibiotics and many were clinically resistant to certain substances. No plasmids were transferred during exogenous isolation. During molecular tests, a few matches were found for the CTX-­?M1 gene. Isolates analyzed with Omnilog PM-­?plates showed resistance to most compounds tested. The isolates showed greatest resistance toward penicillin G, ampicillin, amikacin, kanamycin and trimethoprim. In the study, it was established that resistance among bacteria was frequently occurring in the irrigation water, and ?-­?lactamase producing bacteria was very common. Extended studies are needed to assess the frequency-­? and occurrence of horizontal gene transfer (HGF) in this environment. Although some potential corresponding data is found, it is at this point not possible to determine whether the resistances are due to antibiotics used in veterinary medicine, human medicine or one additional reason is travel and trade..

At seed-growing the aim is to produce a commodity with high germination capacity, good soundness and purity, and also slight admixture of seeds from other species. The capacity of germination and the vigour of the seeds may become impaired in consequence of mechanical damage, infection of diseases, growth of mould, attacks of vermin, high drying temperature, secret germination, sprouting in the ears etc. The germ belongs to the outer and most unprotected parts of the seed, and consequently this is much exposed. Even quite sound seeds can instantaneously have low capability of germination. It can be due to the fact that the seeds are in rest of germination, i.e.

This survey was made during the autumn of 2002 and the beginning of 2003, on commission from the National Board of Forestry. The purpose with the survey was to gather experience and knowledge in the organisation about fencing and this was made through interviews. The ambition was also to get knowledge from people outside the organisation that have great experience of forestry and fencing. The interviews were based on questions that have been composed by the author with help from the supervisors. The questions were the same to both the personal from the National Board of Forestry and to the foresters. Interviews were also made with private landowners, gamekeepers, game researcher, the County Administrative Board, the National Road Administration, pole and net retailers and contractors. The target group for this work is the National Board of Forestry to be forwarded to persons interested in forestry with the ambition to spread knowledge about how to prevent damage on the forest by browsing animals. The deer populations are big in the south of Sweden and growing populations have increased the damage on plantations of broadleaves of the most species.

My final essay is a design proposal for a schoolyard that pertains to the senses. The proposal consists of an illustration plan and this paper. The design proposal takes start in sense stimulation to create a varied environment. The title leads to the concept ?surprisingly predictable?.