This thesis was performed as assignment from Fazer Food Services. The aim was to survey which food additives that were present in the products in the quotation list of one of their suppliers to the Education and Nursing segment. The aim also was to perform a theoretical analysis of these food additives and to make recommendations which food additives are acceptable and which should be excluded from the products in the future. The recommendations are not published in this report, for more information Fazer Food Services can be contacted. Food additives which have already been approved are regarded as safe according to the safety evaluation methods available at the time of approval.

This report is the result of a thesis conducted at the consulting firm Bjerking AB andis the final part of the Bachelor Programme in Construction Engineering at Universityof Uppsala. The work aims to investigate the costs and how the choice of ventilationsystem affects building projects during a long-term period. This report covers costssuch as investment, maintenance and energy but also how they affect residents andbuilders. Building regulations for energy consumption are expected to be tougher;therefore a comparison of two different heat recovery ventilation systems(HRV-system) was made. One system is based on a centrally placed unit that coversthe whole buildings ventilation through vertical shafts.

This project started with an exploration of geometric shapes and textile materials. It resulted in a chair made out of textile bands with different elasticity. The surface for sitting is flat when the chair is not used, and changes in the moment you sit down and gets a new shape. A piece of furniture that adapts to each individual. The chair emphasizes the important relationship between human and product as the person using it becomes a part of the chair for a moment..

This study examines whether it would be profitable for travel distributors in the charter to expand its offerings to other travel related products, and also the products that are in demand. We are also studying the role that brand has for customers' choice of travel.According to Hellman, e-commerce is to be preferred since it is competitive because it gives the travel distributors the opportunity to lower down prices. Therefore, we also investigated the proportion of respondents who would consider buying these travel-related goods through the travel distributors? websiteIn support of this study, is a survey with a population of 100 charter travellers. Respondents are divided into two groups where the first group consists of people who have booked their trip in stores, and the other via the Internet.

In today?s technological society, there are increasingly less physical demands on the locomotor system. However, despite that notion strength and function in the hand?s complex biomechanical system are in fact both needed to cope with daily life. The grip function is a main function in the hand and is used in many examples of scientific research, for instance when assessing physical health and predicting the probabilities of premature mortality.

Have you ever had problems sorting your cables, are the winders you use too big and crude then the EC-winder is the product for you. The EC-winder concept is a compact and intelligent winder for home application. Its simple design and subtle looks enables it to blend in with the surrounding environment. Its function is designed so that it with ease can be handled by any one after only a couple of instructions. You simply thread the cable trough the opening on the winder and then you rotate the upper part until the cable reaches the desired length. After use the winder can be opened to enable easy extraction of the cable..

The project concerns a predevelopment work for Scania AB, a leading manufacturer of heavytrucks, and was performed as a master thesis work for the program Design and ProductDevelopment at KTH. The purpose of this work was to examine how the work situation of truckdrivers, especially long-haulage drivers, can be improved with respect to prolonged sedentaryoccupation. Mental fatigue and under-stimulation due to low cognitive load during long drivescan be major risk factors for traffic accidents. Physical strain injuries to both the skeleton andmuscles are common for this working group and minimal opportunity for daily exercise alsoincreases the risk of developing blood clots in the legs, which can have serious consequences forthe driver's health.An extensive background study, both theoretical and exploratory, was performed to identify thedrivers' concerns and comfort needs. Various treatments such as massage and active sitting wereinvestigated and existing products within the area studied.

The competition between brands on a market has led to a differentiation of the product range and the brands shape is more and more important to take consideration to. As a company and as a leader, you must understand the importance of working with a brand building-process int he organization. It is important to take advantage of the core assets you have with the brand and also within the organization.The paper is presenting David Aakers brand building-process witch involves a model for identity and the seed within. Aaker describes that a clear brand identity can help communicate both intern the organization and out to extern costumers, it could help bring clarity to what the brand stands for. And what it wan to send out.

In recent years, the Swedish railway track system has been neglected in terms of capacity and maintenance. To adapt the existing system to current traffic load there is a great need for extensive improvement and maintenance. Shortcomings are especially occurring on older embankments running over soft subgrades. To select the most suitable method for reinforcement of the embankment, it is important to evaluate different solutions from a life cycle cost perspective. In long-term perspective, it is often shown that a method with low investment cost causes a higher maintenance cost and a shorter technical lifetime.

Bakgrund: Marknadsföring är ett ständigt föränderligt område, och den tekniska utvecklingen har medfört både problem och lösningar. Digital produktplacering, vilket möjliggör infogning av produkter och varumärken i efterbearbetningen av en film- eller tv-inspelning, kan ses som en lösning på den traditionella produktplaceringens brister.Syfte: Syftet med studien är att presentera en konceptuell jämförelse mellan traditionell och digital produktplacering med fokus på att, inom ramen för det senare, beskriva, analysera och skapa en förståelse för fenomenet. Studien innefattar att en definition av digital produktplacering skapas, samtidigt som dess bransch exemplifieras och framtidstron utreds.Genomförande: Efter genomförd förstudie användes dokumentstudier, och intervjuer med fem aktörer inom produktplaceringsbranschen samt en medieforskare, för att studera fenomenet utifrån vårt valda syfte.Slutsats: Vår definition av digital produktplacering, ur marknadsföringssynpunkt, lyder: Digital infogning av produkter, eller varumärken, i tidigare inspelat medieinnehåll i syfte att påverka den avsedda målgruppen. Fenomenet anser vi komplettera traditionell produktplacering som marknadsföringsmetod och kommer därför troligen inte att ersätta densamma, utan istället verka i symbios. Däremot tycks framtiden se positiv ut för de båda fenomenens användande..

As a consumer often chooses product or service to satisfy the specific needs or desires. However, there is more often than not several brands that manufacture the same product, which means we also have to choose between these brands before we can calm our needs. This choice is usually an active decision. We choose a brand that we are familiar with, or a brand whose identity appeals to us. The brand thus has a major impact on both consumers' decision-making in connection with the purchase, but also for business success.

In today?s technological society, there are increasingly less physical demands on the locomotor system. However, despite that notion strength and function in the hand?s complex biomechanical system are in fact both needed to cope with daily life. The grip function is a main function in the hand and is used in many examples of scientific research, for instance when assessing physical health and predicting the probabilities of premature mortality.

The intrest and development of bioenergy and energy from renewable sources in Sweden has increased rapidly over the last few years. There are a whole lot of alternatives for those who would like to venture and invest in renewable energy production. Production of renewable energy opens up many opportunities for forestry and farming to venture a new branch of production, on basis of the primary production. Several of the new energy sources grows on farmland or in the forest. The opportunities exist in the primary products, as well as in refining and reselling, in the value chain of energy. The starting-point is the Farmer as an energyproducer. This master thesis studies the nature of farmer-own firms, who has invested in production of renewable energy.

Titel: RIX-systemet och dess påverkan på finansinstitutens marknadsmaktFörfattare: Tom Douglas och Eric NarfströmHandledare: Evert KöstnerKurs: NEG300, kandidatuppsats Nationalekonomi fördjupningskurs, 15 hp, HT-2013Nyckelord: marknadsmakt, oligopol, räntabilitet, riksbanken, RIX-systemet, konkurrensSyfte: Denna studie syftar till att undersöka om det finns ett samband mellanmedlemskap i RIX-systemet och räntabilitet på eget kapital beträffande företag vilka är aktiva på den svenska finansmarknaden.Metod: I denna studie används både en kvantitativ och kvalitativ metod med insamling av kvantitativ sekundärdata från framförallt Svenska Bankföreningen. Kvalitativ data har främst hämtats från Riksbanken.Teori: Structure-conduct-performance paradigm (SCP) samt Porters femkraftsmodell ligger till grund för den teoretiska referensram som ligger till grund för studien att tillägga till detta används även konventionell konkurrensteori.Slutsats: Studien visar på att det föreligger ett statistiskt signifikant sambandmellan ett deltagande i RIX-systemet och räntabilitet på eget kapital. Title: The RIX-system and its impact on financial institutions market power.Author: Tom Douglas and Eric NarfströmAdvisor: Evert KöstnerCourse: NEG300, Bachelor thesis in Economics, 15 hp, fall 2013Keywords: Market power, oligopoly, return on investment, central bank, the RIX-system, competitionPurpose: This study aims to investigate whether there is a correlation betweena membership within the RIX-system and return on investment regarding companies with in the financial industry of Sweden.Method: In this study, both a quantitative and qualitative approach has been used. Regarding the collection of quantitative data, it has been retrieved mainly from Swedish Bankers' Association. Collection of qualitative data has been collected mainly from The Swedish central bank Riksbanken.Theory: Structure-conduct-performance paradigm (SCP) and Porters five-forces framework underpin the theoretical framework underlying the study.

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.