Wavecraft AB develops medical equipment for heating of organic synthesises. The heating is done with microwaves, which improves the process in both speed and accuracy compared to the more traditional methods where heating elements are used. This report discusses the developement of an automatic lid mechanism for one of Wavecraft's product prototypes. The company assumes that the final product will be integrated by customers into fully automated systems, and the upgrade from a manually to an automatically controlled lid is therefore an important step in the product's developement process.The first stage och the project was an idea generation process. The ideas generated here were organized into five different concepts of which the best one was selected through the use of a concept matrix.

Den här uppsatsen behandlar huruvida det går att mäta marknadsföringsaktivitet i sociala medier eller inte. Idag används Return of Investment (ROI) mätningar för att mäta vilken avkastning en marknadsföringssatsning ger. Syftet med uppsatsen är således att klargöra för de begrepp och mätmetoder som används, samt deras tillförlitlighet. För att besvara de framtagna frågeställningarna har omfattande datainsamling gjorts i form av skriven litteratur och intervjuer. Det har även gjorts egna observationer genom mätningen av en marknadsförd kampanj i de sociala medieverktygen Facebook och Twitter.

Barnoveraller är ett specifikt område inom klädesbranschen. Det ligger lång produktutveckling bakom, som har pågår under ett flertal år, vilket har förbättrat slutprodukten vad det gäller material, beläggningar och sömnadstyper.I B-uppsatsen finner du lättare materialinformation, konstruktionsinformation, nationella samt internationella standarder, krav ställda ifrån tre olika företag och utav ?barnoverallskunden?. Det här samarbetet blir vårt försök att bidra till barnoverallsmarknaden.Vi har utgått ifrån vår referens, ett privatägt barnklädesföretag från Bollebygd, Sverige.1 De har gett oss möjlighet att få vara med i produktutvecklingsprocessen och leta förbättringar som kan gynna slutprodukten och 2bseen som företag. Det har också gett oss möjlighet att skänka något litet (en sammanställning) som kan användas av fler företag i liknande bransch och situation.2bseen önskade sig ett samarbete där vår roll skulle innebära en fortsatt produktutveckling på befintliga produkter som i produktion fått ett och annat fel.Childrens clothing is a particular area of clothing business.

The purpose of this study has been to evaluate whether a Low temperature bio-mass dryer could be integrated with the local district heating system in Malå. The aim is to increase the thermal efficiency of the cogeneration plant in Malå, by lowering the temperature of the cooling medium. Another benefit that comes from this is improved combustion efficiency at the power plant, since drying the fuel causes an Increase of the heating value.Simulations has been made in Excel, and with use of linear regression, to find out if it is profitable. Data for this purpose has been supplied by the power company Skellefteåkraft and furthermore SMHI.The result of the Calculations shows that a very efficient bio-mass dryer is needed, if yield of investments should be made possible. An Investment of 4,27 Mkr, in a dryer, could at a such criterium return 60000 kr/year, if the price of the biomass is 190kr/MWh.

Recently there have been a lot of talk a about the financial crisis and recession. This is understandable since the crisis, which initially was limited to the U.S. now has spread its concern globally in form of bankruptcies, less investment and lots of people have lost here jobs. The purpose of this thesis is to examine how the financial crisis have affected the construction industry relating to market and personnel, but also examine what measures the construction companies have taken. The examination was carried out by information received from the majority of construction-related websites which then was followed up with interviews in the various construction sectors.

Biogas mainly consists of methane and carbon dioxide, where methane is theenergy-rich gas, and is naturally created when organic matter breaks down in absenceof oxygen, also known as anaerobic digestion. A biogas plant re-creates the anaerobicconditions inside a digester where the organic substrate is fed into and digests toproduce biogas. The gas is then used to produce energy by combustion and can beseen as a completely renewable fuel.Today, energy from biogas is used primarily by major stakeholders such asmunicipalities and thus the plants become very large with high investment- andconstruction costs. There are currently few small plants in Sweden, even though thepotential for agriculture and medium-sized to smaller farms to become self-sufficientin terms of electricity and heat is great. Farms have a natural stock of digestibleorganic material in form of manure or crops for example, which are constantlyavailable.

The Swedish cooperative Lantmännen Ekonomiska Förening has initiated a project labelled "Operation Blåljus" that includes an extensive program for closing down elevators. The number of elevators will be reduced from 92 to approximately 15 after harvest of 2007. The objective of Blåljus is to increase the price of grain with 10 öre/kg. A project has been initiated at the Lantmännen Grain division where the purpose is to provide the farmers with support in their decisions and practical advice how they can load a 35 ton grain truck on 30 minutes. The result from the project will serve as a support system to the farmer in his ambition to achieve cost efficient systems to load a truck with grain on the farm.

In Uppsala CHP Plant, there are six pressure reducing valves to reduce the pressure from 15 to 3 bars, before six absorption heat pumps. During the process the energy is conserved but losses occur in form of exergy. The aim of this thesis is to reduce the losses of exergy. This can be done by letting turbines replace the pressure reducing valves.In this thesis an investigation has been done of the conditions today, the conditions after the change from pressure reducing valves to turbines and a comparison of three different types of turbine solutions. The three examined solutions are one turbine, several helical screw expanders and several small turbines in parallel with asynchronous generators.The six absorption heat pumps have been divided into two groups; one group of four and one group of two absorption heat pumps.

The last decades the increased computerisation at the places of work has led to new physical loads in the working life and new demands on the working environment. The widespread usage of computers in the working life has led to more sedentary work and less daily movement.The purpose of the thesis is to develop a new product to a concept that in a low intensive and healthy promotional way will activate the body. The product will make a combination of healthy promotion activity and work during office hours possible and primary aims to those with a sedentary office work, which leads to that the body don´t get to be activated in the extent needed.Information has been gathered from studies already made in this area, interviews plus a study and an experiment. From the gathered information concepts and functional solutions has been generated and evaluated to result in a product concept.The thesis has resulted in a concept that consists of a work place unit where the user walks on a treadmill and works at the same time.A general conclusion which can be drawn is that the majority of persons that tested to walk and simultaneously work with a computor on the treadmill found this way of working attractive. Many were positively surprised and said that they would use such an physically activating work place implement if it was available at their place of work..

Involving prospective users in a development process is important. This makes it easier to make a more usable product. This thesis is about developing an intranet targeting a school and focus is aimed towards intranet usability.The reader is given knowledge into how to design and implement an intranet using persona. Design and develop by using persona is difficult when there is a group with large variety of knowledge, age and technology interest, so as in this case. Persona although always helps during the development phase because of the strong links to the personas that are created, which gives developers a constant reminder of the end users of the system.The thesis describes how information is collected and processed.

GCM is a product information management system which handles data for consumer packaged goods. GCM was developed during the middle of the nineties and was acquired by Prevas AB in 2004. The GCM application relies on the services provided by the organization GS1, which supplies global specifications and validations for trade items across several sectors. GCM is updated regularly due to the frequent changes in specifications from GS1. However, the overall graphical user interface design has not been redesigned during these years.This dissertation studies possible improvements for the webpage that handles product data in GCM.

2013 a decision was made that all projects at the Swedish Transport Administration shoulduse BIM (Building Information Modeling) to some extent from 2015. BIM is an approachthat allows for streamlining of projects by the use of a 3D-model created in an early stage ofthe project. The 3D-model can carry information about the facility throughout its life cyclefrom planning to management. The use of a 3D-model can help the project to detect errors inearly stages of the project when it is easy and cheap to fix the error instead of finding theerror in the construction phase when it is costly and time consuming to fix it. 3D-models alsolead to improved communication both within the project groups and with the public.

Nordic Marine Sauna AB has, since 2005, designed, manufactured and sold floating saunas. Theproduct are characterised by a well thought thru and appealing design and its high quality. Thecompany is now intending to open a new business area by starting a subsidiary, NordicSubmarine Sauna AB, which will design submerged saunas. The expected customers are leisureand conference centres as well as customers that seek an experience out of the ordinary.Due to the products technical complexity a master thesis was adverted. The task was to do aninvestigation whether such a product is technically viable.The job involved research of existing products and constructions material as well as designingthe product with CAD and FEM-programs.

It is important for firms to continually develop their offerings as the business landscape develops in order to sustain their competitiveness (e.g. Schumpeter, 1934; Ansoff, 1979; Porter, 1985; Trott, 2012). In a context of globalization, rapid technology development and changing customer needs, the paper packaging industry is urged to enhance its product development activities (Hansen & Niskanen, 2007; Björkdahl & Börjesson, 2011). However, there is little research about paper packaging firms? product development processes (ibid).

This study is intended to identify which factors that influence the success of initiatives in Customer Relationship Management, usually abbreviated as CRM. In the course of this study we have been in contact with forty-two companies operating in Sweden within eleven different sectors in order to find out how they operate regarding CRM initiatives, particularly initiatives within marketing and promotions. Against the data collected during the study it was concluded that the companies working with CRM believed that the CRM initiatives resulted in higher profitability and created more loyal customers. At the same time it was evident that the companies had different views on CRM as a method and its benefits. The majority of the companies could not present any tangible results from CRM-initiatives. It was also revealed that decisions regarding CRM initiatives were based on subjective assessments and without theoretical foundation.