The need for snow-free surfaces at squares, bus stops, platforms, car parks and sports facilities increases and at the same time energy price rise and the environment is becoming a hotter issue. The construction of the ground heating systems often lack thermal insulation under the heating pipes, which means that the heat from the pipes not only warm up the soil surface but also heats the surrounding soil. The insulation also has more features, by insulating the risk of frost damage is minimized. The goal of this report is to demonstrate the large heat loss and energy costs in the absence of insulation under the heating system.The report begins with a scientific way to study and treating the soil heating system uses, and the theory involved. Furthermore it also deals with different routing principles of heat pipes depending on the facility.All calculations are made with so called finite element method (FEM), in COMSOL Multiphysics 3,5a, where models are created with different conditions.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2014:07.

Companies that invest in e-learning have different expectations regarding the outcome of the investment. According to literature and articles it is common that companies see reduction of costs as the primary benefit with e-learning. Therefore we ask ourselves the question if companies have attained the expected benefit of the investment in e-learning and to what extent cost reduction have been a determining factor in the investments? The purpose of the thesis is to examine if companies that invest in e-learning have attained the expected benefits. We also want to examine what the reason for investing in e-learning is and if cost reduction is the primary reason for investing. The study is founded on a qualitative method that is based on a case study in eight companies.

In order to produce grain in an economically rational manner numerous decisions have to be made. One of these decisions is what tillage system to use. The cost of the tillage system is a large part of the total cost in grain production. Different tillage systems result in different distribution of fixed costs, operating costs and timeliness costs. The price of the produced grain and cost of inputs also affect the best way to produce grain.

BACKGROUND: Today?s societal changes, including high rate of change and increasing information flows, are increasing the demand on the individual mental capacity. It becomes increasingly difficult to analytically process all the different dilemmas and everyday decisions as individuals have a limited mental capacity available to make these decisions. Thus, it has been suggested that ego-depleted relies more heavily on intuition, which is less burdensome, when making decision. However little is known about to what extent intuitive decisions differ from analytic.

Interest in alternative energies is high in Sweden today, particularly in the agricultural sector. According to the Swedish lantbruksbarometern (2009), almost all respondents consider the use of some form of alternative energy from the farm. While interest in alternative energies is large, attention to the alternative energy straw has fallen and is almost nowhere mentioned in the literature today. Three years ago, in the Lantbruksbarometern nearly 44% of the farmers would be willing to invest in straw as heating system on the farm. How do the farmers decide to invest in alternative energies? With this information a problem is presented for this paper.

An increasing number of heat pump producers have developed heat pumps that can be connected to solar panels. In this thesis we have examined the possibilities of connecting solar panels to existing ground source- and geothermal heat pumps that has not been adapted to solar panels. During the work process, a prototype plant has been built to compare our theory with the practical results and with our designed sizing tool. The work has rendered in knowledge that will be used to build a sun module that can be easily connect to the existing heat pump system. The existing heat pump, our test plant, has been supplemented by an advanced storage tank used to allow different operating modes.

Photovoltaic Systems in Sweden has longbeen heavily dependent on subsidies and grants to bring in a profit for the investor. Production of excess electricity is a major reason for this as the compensation for excess electricity today is low. However, there are businesses that have an electricityneed that are particularly suitable for solar electricity. These businesses have an electricity demand when the sun shines the brightest and if the Photovoltaic System is properly scaled, the excess electricity can be minimized. A golf club is that kind of a business and this thesis aims to examinate the solar power potential for golf businesses in Sweden.Nine golf clubs was selected from different locations in Sweden.

In the future the Swedish pension system will face major problems. With an increasing aging population combined with a decreasing share of working population the financing of the pension system is becoming a bigger problem than previously predicted. This means the individual himself will have a bigger responsibility to invest money for their future retirement. It has been shown that a large proportion of the people who invests for their future pension have neither the interest nor the time to actively invest their pension capital. To make it easier for those who invest for their retirement, some Swedish banks have created so-called generation funds.

Issues regarding the environment are commonly discussed in the media. The most common problem that is discussed is how to decrease the emissions of greenhouse gases by human beings. The municipality of Kristianstad has chosen to work with a project named ?Biogas Kristianstad? which purposes are to use all of the produced biogas as motor fuel and to speed up the introduction of biogas on the local market. This is in an effort to decrease the effects on the environment in the municipality of Kristianstad.

This thesis work includes studies and simulation how magnetization of the translator in a linear generator for wave power can be automated. The translator is the moving component in the generator that is "dressed" with permanent magnets. The translator is magnetized with rectangle-shaped permanent magnets that are today's strongest permanent magnet type of neodymium-iron-boron (NdFeB).Eight equivalent metal sheets are mounted around the translator. The plates have milled tracks where 106 permanent magnets per sheet are mounted. Today the assembling of the magnets is done by hand, which is a very tedious and time-consuming work.  This project presents investigations about the automation of the translator magnetization theoretically and simulation results are preformed in ABB's robot simulation software RobotStudio. Even robot-held tool was designed that enables the robot to be able to magnetize the translator in a simple manner.  The investment cost is roughly 1.5 million SEK. With an economic life-time of five years, the investment costs are estimated to 24000 SEK / month.  According to the calculations, this project is very motivated to implement, as it provides savings up to 17 000 SEK per translator which is 10.2 million SEK assuming that the robot cell is operating at full speed the whole year.According to this thesis work the result is a 4x9 meter cell with two industrial robots of the type ABB IRB6650S.The cycle time to magnetize one translator was calculated to about 10 hours.This prototype of project can possibly be implemented in a full-scale production line and performed according to the calculations and simulations presented in the report. Further work is suggested to improve the tool.Lyssna .

AbstractVäxjö University, School of Social SciencesBachelor thesisTitle: Varför en rädsla för alternativmedicin? En studie om hur EU?s kosttillskottsdirektiv har implementerats i Sverige.Author: Annica BlomstrandSupervisor: Anne Haglund-MorrisseyThe aim of this study is to investigate the process of legislation and implementation of the directive of the European Union on the food supplements, focused on member state of Sweden.There are two questions in this study: What was the process of legislation in the period when the Directive on the food supplements became established? and How does the implementation of EU?s decision on the food supplements works in reality? In order to answer these questions, two different methods were used. One was qualitative analysis of the available text and the other one case-study (qualitative including interviews)The conclusion is that the implementation has not been successful. The process of legislation has followed its traditional way, which in its turn did not leave so much space to the thorough implementation of the Directive. Unfortunately, this is a process that overlooks citizens and countries with different premises, affected by the decision.Keywords: EU, kostillskottdirektivet, lagstiftningsprocessen, implementering, organisationsteori, fallstudie.

The purpose of this thesis project was to study how different companies are working with LastTime Buy and through that study propose improved ways of working with this for Scania CVAB. The project aimed at studying the work processes from three different perspectives:decision models, quality aspects and liability aspects between companies.To study this, qualitative interviews with one or several representatives from differentcompanies that are affected by or involved in Last Time Buy were used. Representatives wereselected partly from Original Equipment Manufacturers, suppliers, component manufacturersand companies offering third part solutions for Last Time Buy. The companies also reflecteddifferent industries. The interviews aimed to create an understanding for the methods used atthe different companies but also the ways of thinking and the knowledge behind the choice ofthese working methods.The analysis shows that the Original Equipment Manufacturers used very similar decisionmodels for Last Time Buy, but that external factors or the company strategy made them reachdifferent results.

This study deals with the road freight sector's capital structure and how leases, loans and equity affect the ratios. The study is based on a ten-year period between 2000-2010 in Sweden. Investments in finance is a complex and interesting subject to study, there are many factors that can affect how the company best choose their investments when they have many great business investment the decisions plays a greater role. The aim is to find an optimal capital structure from a financial investment point of view. The purpose will be answered by the following research question: Are there significant differences between leases, loans and equity financed fleet of factors, profitability, tax, turnover, age, and cyclicality. The study will also examine how debt is related to profit margin, DuPont and the tax, all through a regression analysis. Then were plausible economic theories for the study.

When a decision is to be made on what long term strategic forest management plan to use, consideration must often be taken to multiple objectives. Such decisions are very complex and a promising approach to handle them is by Multiple Criteria Decision Analyses (MCDA). The study is based on the problem that the MCDA that have been implemented into forest management planning have only had capacity to compare and evaluate a limited number of management plans; which means that there is a risk the most suitable plan is missed. The aim with this study was to test the applicability of combining the MCDA tools: the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) and the Analytic Hierarchy Process (AHP) for including consideration to multi-objectives into strategic forest management planning. The study was based on the process of creating and selecting a management plan, using Heureka PlanWise, suitable for all the major objectives found in the forest holdings of a municipality in northern Sweden.