Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

The Swedish National Labour Market Administration wishes to acquire further knowledge about how the evaluation process of vocational rehabilitation at the employment service operates as a part of the quality assurance of this activity. The primary task for vocational rehabilitation at the employment service is to investigate the work capacity of unemployed people, to give them increased knowledge and better understanding of their own capacity concerning work or education. The aim of this study was to survey the evaluation process of vocational rehabilitation at the employment service in Sweden. Data were collected through telephone interviews with 15 occupational therapists employed at the employment service, who were working with vocational rehabilitation. The result shows that the investigation of work capacity can take place in different environments and that the space of time for an investigation can vary.

Several studies have investigated the relationship between different measures of innovative activity, such as patent statistics and R&D expenditures and some have looked deeper into the differences between large and small firms regarding number of patents issued per employee or per R&D dollar. In this paper, the objective is to find out if there are any indications of a barrier to entry (due to economical factors, lack of knowledge etc) for small firms to get into the field of patent handling. The approach is to first set up a hypothesis based on some simple assumptions about how firms would make decisions about whether to apply for a patent or not and thereafter use econometric methods in an empirical investigation. The data used for this study are figures on number of employees, number of patents granted and R&D expenditures for the Swedish firms in the pulp and paper industry. The main conclusion is that, based on the analysis of the data from this rather limited group of firms, no such barrier can be seen..

Employees of the criminal correctional system have a duty to notify social services if they suspect that children are exposed to maltreatment, according to Chapter 14, § 1 SoL. Despite the obligation to report, studies show that this is not done at all times. The purpose of this paper is to describe and analyze how the criminal correctional system in Kalmar looks at notification if they suspect that children are exposed to maltreatment. To examine this, we used qualitative research method based on semi-structuring interviews; these were carried out with six employees, working in the criminal correctional system. The answers that emerged during the interviews have been analyzed using Yeheskel Hasenfeld theory of human services organizations, and trough previous research.

Datoranvändningen i samhället växer för varje dag. Det är då viktigt att programvara håller hög kvalité, då vissa programvaror styr kritiska maskiner som exempelvis flygplan. Ett sätt att få kvalitativa programvaror är att använda bra utvecklingsverktyg. I detta arbete utvärderas fem olika utvecklingsverktyg: GNAT (Ada), Microsoft Visual C++, Microsoft J++, Borland Delphi och Active Perl. Inriktningen på utvärderingen är mot utveckling av programvara för PLC-system.

The county hospital of Dalarna has for the last couple of years carried through a process of digitalization. The result is that within the county it exists image plate systems from two different manufacturers. In an attempt to create a tool for dose optimization and dose surveillance the county of Dalarna would like to investigate if the exposure index from Agfa and Fuji is suitable as a dose indicator. An investigation of the exposure index, S, from Fuji has already been done. This thesis has been continuing the investigation by evaluating the stability of the exposure index, lgM, from Agfa.

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

This essay takes the three models from Allison and Zelikow book Essence of decision and applies them on the Swedish defense system. After the cold war the Swedish defense system had to undergo changes to be a more modern defense and be able to defend Sweden against threats. To also be able to cooperate with other countries in peacekeeping operations the Swedish defense had to be reorganized. The solution was to change direction from a defense system that was organized for invasion to instead be a movable defense ready for any challenge in Sweden or abroad. This reorganization will be analyzed according to the three different models..

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.

The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.

The research objective of this thesis was to conduct a holistic evaluation of an operational information system. By holistic evaluation we mean that an equal focus was placed on both the system system perspective and its users user perspective, in the actual environment where the system and its users function contextuality. In addition, the methodological objective of the study was to test a new research approach in a real life setting. The participants of the study were twenty newspaper journalists employed at Göteborgs-Posten GP. The information system NewsLink is a manually indexed full-text database containing all articles published in GP since 1994.

This master?s thesis was performed at PartnerTech AB in Åtvidaberg. It addresses the problem of managing test results obtained from testing electronics manufactured by PartnerTech. PartnerTech has developed a test system, called Tor, which performs tests on manufactured boards and stores the test results in files. The Tor system consists of both hardware and software part, where the software runs on an ordinary PC with MS DOS/Windows 2000.