In this composition, a study of consignment inventory on basis of the factors which are important for implementation and application of consignment inventory are made. Logistics chain from subcontractor to end customer is becoming more complex when the volume of items constantly increases to satisfy the needs of the market. From that perspective, companies had large inventories but today it is a lot of different solutions to streamline inventory management. One way that recently becomes increasingly common is to let the subcontractor fill up the customers stock using different approaches such as VMI (Vendor Managed Inventory). A further step in the evolution can be to make use of consignment inventory where the vendor owns the stock of the customer.

The task of this project was to build an computer processing system for pressureregulation, in which the pressure loss over the open hydrolicvalve should be kept as low as possible. By using an cross connected proportional directional valve the valve problem could be solved. The control- and regulationproblem for the pressureregulation system was solved by using the DAQ- card NI6035E from National Instruments and the computerprogram Automatic Pressure Control 1.0 which has been software developed and written in Visual Basic. The final result showed that correct processvarible was obtained in 0,5 seconds, when the setpoint was changed in the testarea 0 - 2,5 MPa..

Detta examensarbete har ägt rum vid Produktionsverkstad 1 (PV1) på Wexiödisk AB där diskmaskiner av huvtyp tillverkas. Syftet med detta examensarbete har varit att undersöka vilka lagerstyrningsmodeller som är lämpliga för att styra avdelningens materialflöden med. Arbetet har genomförts i två steg. Först behandlades artiklar unika för produkterna vid PV1, därefter artiklar gemensamma med andra produkter. Enligt modeller ur relevant litteratur utformades förslag på hur dessa kunde appliceras praktiskt.

Studier har visat att det finns ett samband mellan syskonplacering och locus of control, medan andra studier inte funnit något samband. Syftet med denna studie är att undersöka relationen mellan syskonplacering, kön och locus of control ur ett hälsoperspektiv hos gymnasieelever i årskurs 3. I undersökningen deltog 147 gymnasielever ifrån fem skolor i Kronobergs län. Resultatet visade att kön och syskonplacering samvarierade med intern health locus of control (F= 3,01;p< 0,03; ES= 6,2) och att syskonplacering och kön tillsammans inte visade någon signifikant inverkan på extern health locus of control (F= 2,20;p=<0,09; ES= 4,6). Fyndet kan indikera att manliga mellanbarn i större utsträckning strävar efter en intern health locus of control än kvinnliga mellanbarn.Nyckelord: Syskonplacering, health locus of control, intern- och extern locus of control, kön..

The purpose of this thesis is to examine how the Management Control System is affected by a change in the owner structure from family owned to not-family owned. The study also tries to identify explaining factors behind the possible effects to the Management Control System. The study is based on a comprehensive case study on the company Alcro-Beckers which, in year 2001, was acquired from the owner Lindéngruppen fully owned by Ulf G Lindén. The acquirer was the non-family owned company Kemira OY, a Finnish stock listed group. The empirical foundation mainly comes from interviews conducted with people who were/are directly connected to the company, either as employees or as representatives for the owner.

Detta arbete syftar huvudsakligen till att bidra med rekommendationer för hur ett system för mätning av kvalitetsbristkostnader hos ABB-enheten Control products Sweden bör upprättas. ABB:s globala riktlinjer för vad som ska mätas i ett sådant system har fungerat som utgångspunkt. I rapporten diskuteras vidare hur arbetet med mätsystemet ska upprätthållas utifrån ett ledarskapsperspektiv. I studien har en litteraturstudie legat till grund för en nulägesbeskrivning, en benchmarkingstudie, deltagande observationer och intervjuer. Rapporten innehåller också en sällsynt detaljerat beskriven kvalitetsbristkostnadsmätning som fungerar som riktmärke för enhetens fortsatta arbete med kvalitetsbristkostnader..

Today all buildings contain some form of home automation. It might be heating controlled by athermostat or motion detectors controlling outdoor lighting.This paper,The Intelligent House, deals with the planning of a house in Kiruna, in the north ofSweden and further immerses itself in home automation or intelligent control in single-familyhomes. The house has been entirely planned, from layout to structural design and plumbing.The purpose of the paper has been to investigate the possibilities in home automation in singlefamilyhomes and to choose a suitable home automation system for the house being planned.The system has been designed and the costs and energy savings have been calculated.The system chosen for the house is called KNX and is the largest system for home automation inSweden. It is used to control heating, ventilation, lighting and alarm systems in the house. Is hasbeen found that KNX is very expensive and that the amount of energy, possible to save in thehouse, using the system, is relatively small.

This thesis examines a possible control strategy to minimize flow fluctuations in Uppsala?s district heating system. High variations in flow rate may lead to complications caused by hydraulic constraints in the district heating system. These complications, such as inadequate pressure and temperature levels, increase the risk of heat delivery failures. It is therefore important to avoid such situations both for the producer and for the customers.Typically, the forward temperature is controlled by using a rough correlation with respect to the outdoor temperature.

Course: Degree project in logistics, 4FE05E, spring 2013Author: Maria WennbergSupervisor: Petra AnderssonExaminer: Helena ForslundTitle: Standardization and improvement of the outbound process execution Background: Transportation represents a critical part of companies? logistics. Special management and control is needed when using a third party logistics. Balco uses a third party logistics for their deliveries of balcony parts and before it takes place the outbound process is executed. Currently, Balco experience difficulties with the process? many ways to be performed by the project managers and logistics department.

The purpose of this study is to perform an in-depth analysis of what effects a privatization of a service organization has on the management control system within the organization. The paper studies a service organization which provides service for the county council in Östergötland, Sweden. The result is based on interviews with several people, both within the acquiring private company and also within the county council in Östergötland, and analyzed using Samuelson?s (2005) framework from his study ?Organizational, Governance and Control ?. The major finding in the thesis is that the factors that have had the largest impact on the changes in management control are the new owner demands and the degree of operationalization of the overall goal..

A performance measurement system can be used as a means to evaluate past performances and to communicate prioritizations. It has also been proposed that a performance measurement system can serve as a method to execute strategies, guide in operational decisions and constitute a tool for making the organization more efficient. Yet one may question if such a system will ever reach this capacity if operating managers do not utilize it as a management tool, but rather treat it as a mere report in the bunch. This paper explores how middle managers in fact apply performance measures and what obstacles there are to integrating them in the management of subunits. Furthermore it serves to investigate whether these managers experience a conflict between how they are expected to use the measures and what they deem possible to adopt.

Simulation means running a model of a system with suitable input and observing the corresponding output. Real-time environment simulation is a special kind of simulation used to simulate a control system's environment in real-time. This is done to test the control system before it is used in its real environment. In this project, computer simulation of a certain kind of environments, called track-based systems, is studied and a general model for track-based systems is developed. In this model, track layouts are represented by graphs, which is a flexible and extensible representation and a method for visualizing these layouts is presented.

A growing number of companies realise that to achieve their environmental goals and satisfy stakeholder expectations, they need to look beyond their own facilities and to involve their suppliers in environmental initiatives. A life cycle approach means that the production system should be optimised as whole, across national boarders and individual organisations taking part all the way from extraction to disposal. This study is a Life Cycle Inventory of resources used when producing a piece of cotton garment and the method is based on the standardisation series of ISO 14040-43. The area of study, Tamil Nadu the most southern state of India, accounts for more than 90% of India?s knitwear exports to Western Europe.

AbstractThe Municipality Council decided in 2010 to develop a comprehensive energy efficiency strategy with financial and methodological support from Energimyndigheten (The Swedish Energy Agency). The strategy should include 3 major parts: an inventory of the 2009 energy use defining the current situation, the 2014 and 2020 goals for energy use, and an action plan for goal achievements. According to Energimyndigheten, the strategy must include all municipal administration premises, vehicles, and all majority-owned companies (as Laholmshem, the municipal housing company).The report describes the inventory work in order to obtain the 2009 energy use and the sources of information used. The inventory values are used as the base year values for the 2014 and 2020 goals. The inventory showed that information about the vehicles is dispersed in the municipal administration and no clear structure exists with respect to mileage and fuels used.

I ett litet företag finns en risk att ledningen fokuserar så mycket på kärnverksamheten att övriga administrativa verksamheter åsidosätts. Exempelvis finns det risk att företaget inte har full kontroll på sina lager.Syftet med den här uppsatsen är att beskriva och analysera värderingen och styrningen av lagret hos ett litet handelsföretag med butik och i förekommande fall ge förbättringsförslag.Vi har dels studerat lagar och rekommendationer avseende hantering av lager samt litteratur inom området lagerstyrning i handelsföretag. Dessutom har vi intervjuat företrädare för ett typiskt litet handelsföretag.Det undersökta företaget uppfyller gällande lagar och rekommendationer, men inte så mycket mer. Vidare använder sig företaget mestadels av känsla och erfarenhet i sin lagerstyrning. Förtaget använder alltså inte formella analyser och metoder i någon större utsträckning, om ens någon.