The aim of this report has been to investigate the use of electricity energy before and after a conversion of foodservice. The ambition was also to highlight the food safety and the retention of nutrients in relation to the conversion. The methods being used were qualitative interviews, case studies, study visits and literature. The equipment and the use of energy was the same in 2008 as in 2011 for hot-holding of the tested component, sauce with ham. The chilled system used more than three times the energy and cost for one portion than one portion in the hot-hold system.

This thesis describes new methods for automatic crack detection in pavements. Cracks in pavements can be used as an early indication for the need of reparation.Automatic crack detection is preferable compared to manual inventory; the repeatability can be better, the inventory can be done at a higher speed and can be done without interruption of the traffic.The automatic and semi-automatic crack detection systems that exist today use Image Analysis methods. There are today powerful methods available in the area of Computer Vision. These methods work in higher dimensions with greater complexity and generate measures of local signal properties, while Image Analyses methods for crack detection use morphological operations on binary images.Methods for digitalizing video data on VHS-cassettes and stitching images from nearby frames have been developed.Four methods for crack detection have been evaluated, and two of them have been used to form a crack detection and classification program implemented in the calculation program Matlab.One image set was used during the implementation and another image set was used for validation. The crack detection system did perform correct detection on 99.2 percent when analysing the images which were used during implementation.

The purpose with this study is that examine if the contingency factors as sort of market and competition can affect the companies, which means of control they apply..

In theory, the management control of maintenance functions is described as problematic due to the nature of the work performed in the unit. The purpose of this thesis is to examine these predicted problems in practice. Further,the thesis aims at identifying how these control problems may affect the relationships between the maintenance department and its internal customers. A case study has been conducted in one of Sweden?s largest industrial companies to investigate the said control problems in practice.

During the summer of 2007 I was employed by Högestad Christinehofs Förvaltning AB. My main task was to make an inventory of giant trees at the estate. Högestad and Christinehof,which with their total possession of 13 000 ha of land is the biggest estate in Scania. A giant tree is a tree with a diameter in breast height more then 1 meter. Trees of these dimensions are registered by Swedish authorities. Landowners with a giant tree on their property can receive a subsidy for cutting trees that are in competition with the giant tree.(Levenskog, 2007) Giant trees are important for biodiversity in the landscape and there are important habitats for different insects, birds, bats, lichens and funguses.

With a changing climate, we can expect higher temperatures and more precipitation in Sweden.As the temperature increases, new weed species are expected to migrate in from more southerlylatitudes, resulting in requests for new techniques for weed control. In addition, we might see agreater number of weed species and higher biomass production due to increased concentrationof CO2 in the atmosphere.Increased understanding of the biology of specific weed species will become more importantin future weed control. This will help to control the weeds more efficiently. Higher prices onpesticides and a public demand for reduced use of pesticides make growers more inclined to usemechanical weed control on a larger scale and to a greater extent prevent weed establishmentbefore sowing. A well-planned crop rotation is the most important preventive measure, whichmight also include delayed sowing, and dark harrowing and sowing.Research takes place on many levels within the weed area and several alternative methodsare being developed.

This pilot study examined whether treatment with Vortex Process Technology (VPT) of the irrigation water used on tomato (Solanum lycopersicum) plants had any effect on plant growth. In a block experiment, with two blocks comprising 12 vases containing 1 L water and two tomato plantlets, treatment in which, nutrient solution was based on Vortex-treated water was compared with an control using untreated water. All vases were kept in a static aerated culture system in a daylight chamber for four weeks. The results showed that the effect of the two blocks exceeded the effect of vortex treatment in terms of leaf area and weight of fresh and dry matter. Plant height, stem width and internodal length were significantly different in tomato plants grown in Vortex-processed water compared with the untreated control.

The poultry red mite, Dermanyssus gallinae, is a common problem in poultry facilities, causing great discomfort for the hens and effecting the production economically. Few efficient acaricides are available and there is a need for new control methods since resistance has become a problem in some cases. The aim of this study was to evaluate the efficiency of the new liquid silica control agent Ectopar, on the poultry red mite. An initial in vitro test of Ectopar and its two components individually was performed, where live mites were sealed in together with filter paper impregnated with one of the three solutions prepared. The survival of the mites was thereafter recorded repeatedly during a period of 120 hours and compared to a control. For the field study, two poultry farms with different housing systems were used, one with furnished cages (farm 1) and one with a single tier floor system (farm 2).

The function of budgetary controls is to control the resource allocation within companies. It can also be an instrument for measure and control subordinates and/or business units? performance (Van der Stede 2001). This paper concerns the latter; when the budgetary control function is used to measure and control subordinates performance based on budget. Previous research in this area has not yet accomplished to explain the effects of tight budgetary control which Hartman (2000) considers as the main issue to be concerned about in management accounting research.Previous research has presented contradictory findings regarding tight budgetary control explained by positive effects as well as negative effects during the last decades.

This report treats two assignments that concerns the biofuel furnace at Billerud Skärblacka AB and how these assignments were solved. The assignments were: reducing the number of CO-spikes and tuning the overfire air control loop. To reduce the number of CO-spikes the possibility that skewness in mass distribution affects the number of CO-spikes were study. The skewnwss of mass distribution was controled and adjusted with two experiments. The conclusion that was made is that the skewness of mass distribution were not sufficient enough to affect the number of CO-spikes.

Superior Canal Dehiscence Syndrome (SCDS) is a newly described syndrome with symptoms including sound- and pressure induced vertigo, conductive hyperacusis and autophony. SCDS is caused by absence of bone overlying the superior semicircular canal and can be surgically treated. As the syndrome and surgical technique is new, it is of importance to study possible postoperative outcomes..

As an amateur it can be difficult filming from several angles at the same time as this requires several cameras. It´s also hard to film at occasions when it´s not appropriate to manoeuvre the camera manually. Systems for solving these problems already exist, but it´s either more expensive, professionalsystems or cheaper systems with limited functionality.The purpose of this project is to develop a cost efficient solution to the problem above that offers a better functionality then existing commercial systems. The biggest difference from existing products is the wireless video feedback from the camera to the remote unit.The result of the project is a system consisting of two units, a manoeuvre unit with a cradle for the video camera and a remote unit from which the operator can control pan and tilt of the video camera.Communication between the two units is wireless.On the remote unit there is a joystick and a display mounted. In addition to this, there is also an IR receiver that is capable of reading the signal from the cameras own remote and sending it to the manoeuvre unit.The manoeuvre unit is equipped with one motor to control the tilt function and one motor to control the pan.

A growing problem in Swedish herbicide free agriculture, the Canadian thistle has been the object of several new trials, seeking methods for non-chemical weed control. The new trials have mainly confirmed earlier experiences; that the most successful methods of control are springtime ploughing, repeated cutting and competition from a stout crop. Row hoeing has also been proven effective. As opposed to earlier recommendations, half season fallow has shown to be a risky and often ineffective method of control. Trials regarding biological methods have shown that above others thistle rust (Puccinia punctiformis) may have the potential of controlling Canadian thistle the future. .

The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.

The function of budgetary controls is to control the resource allocation within companies. It can also be an instrument for measure and control subordinates and/or business units? performance (Van der Stede 2001). This paper concerns the latter; when the budgetary control function is used to measure and control subordinates performance based on budget. Previous research in this area has not yet accomplished to explain the effects of tight budgetary control which Hartman (2000) considers as the main issue to be concerned about in management accounting research.Previous research has presented contradictory findings regarding tight budgetary control explained by positive effects as well as negative effects during the last decades.