It has become increasingly common for cities and municipalities to take greater account of the place marketing, and to see the physical location as a brand. An early step in this process is to make the image measurements of the place, in order to develop better marketing strategies. A method often used in tourism research for this type of measurements is Etchner and Ritchie's theoretical framework. The framework is initially designed to measure visitor's image of a tourist destination.Almost all previous research in this area is based on the visitor's perspective, but Olofsson and Skredsvik have used this framework to measure a location's image among the residents. They feel that the residents of a place can be seen as ambassadors of the place because they know the site well.

Wind power is becoming an increasingly important source of energy. There are several national and international goals set to increase to amount of renewable energy, and in order to meet these goals, the wind power production plays an important part and the establishment of new wind power farms are required. The Swedish national project Riksintresse Vindbruk has appointed areas in Sweden suitable for wind power, mainly when looking at the physical wind conditions of the area. In this study, I aim to define suitable areas for wind power establishment in Norrbottens län. In order to reach this goal, a critical regional method was developed and completed using GIS.

This thesis has been performed at Clinical Chemistry at Sahlgrenska University Hospital in Gothenburg. The purpose of the project was to investigate new and alternative ways to determinate synthetic cannabinoids by gas chromatography-mass spectrometry. Currently, the possibilities to quantify synthetic cannabinoids are very limited. This can lead to an increased use of synthetic cannabinoids as the risk of detection is low, which may be known by drug users. The synthetic cannabinoids are sold mixed with different herbs and have varying names like Spice Gold, Spice Silver, K2, Smoke and Pot-pourri.The synthetic cannabinoids analyzed were JWH-018 and JWH-073, which are commonly found in seized Spice material.

 Extra high requirements are made on all systems in health care that they are functional and usable,´something, however, that is not always the case. At Emergency Admissions at Sahlgrenska University´Hospital many systems are in use at the same time and it happens that much overhead is caused by having to fill in the same information in different places. In addition, data that is gathered is to a large extent saved in free text format, which means that it cannot be used in a larger context such as research, quality control or for decision support. Data is saved in the patient file only for the treatment process of the individual patient.A data collecting system with decision support functionality could be a first step towards reducing Emergency Admissions? costs and patients? waiting times by providing a structured method of data collection.

This thesis was performed at Zetterbergs Industri AB. Zetterbergs is designing, building and mounts body systems for trucks, including dumpers and tippers. The assignment for the thesis was to design a door hinge for a spreader gate. The spreader gate is the top of the two tailgates on a dumper or tipper and opens back and outwards when tipping the cargo. The spreader gate controls the mass flow of the material being tipped.

When new land use policies are made, opinions of stakeholders need to be taken in account, to avoid future conflicts. The motivations of commercial enterprises are often clear and easily communicated but due to inaccessibility and language barriers the indigenous people?s perspectives and needs are harder to reveal. This study therefore aims to identify species and sites of importance for the local people in Masihulan village on Seram Island, East Indonesia. This is a first step to facilitate better integration of local people´s needs into local government decision-making processes.Researchers at the Center of International Forestry Research (CIFOR), with headquarter in Indonesia, have developed an approached called ?Multidisciplinary Landscape Assessment? that aims to assess important natural resources for local communities in tropical countries.

The purpose of this study is to investigate how homosexuality and homosexual adoptions are manifested in children's comic "Bamse" and study the result in the light of a brief background about the western society and gay history. The study has a historical gender perspective and focus homosexuality primarily in modern times. Drawing on critical theory and semiotic analysis, the study shows how ideas and ideology surrounding same-sex relations and parenting are negotiated in the ?Bamse? comic. 2010 was the year when the Bamse cartoon took a step into the gender debate and introduced two gay rabbits who adopted an infant.The study shows that despite the obvious intent to anchor homosexuality as normal and integrated in the society there are hidden ideologies that reveals homosexuality as abnormal and excluded.

One step towards a more sustainable energy system is to create a more flexible electrical grid, where increased demand response among electricity consumers can play an important role. A distribution grid owner can encourage their customers to use electricity more evenly distributed during the day by introducing different types of grid fees such as time-differentiated power tariffs. In this master thesis, the theoretical economic impact of a flattened load profile for a distribution grid owner is investigated. Different factors that impact the distribution grid owner?s economy are identified and two are chosen to be quantified; losses in the grid and the fee to the feeding grid.

Today small metal parts are mass-produced as for example rollers in cylinder bearings. At high velocity cutting the metal is cut with a great force in a scissor-like device. Both precision and repeatability is important to be able to guarantee good quality, but from an economical point of view it is also important to keep a great manufacturing capacity. The part of the process that is most time consuming is when the metal bar, that is about to be cut, is fed to the right position. Therefore it is interesting to examine if the time used for positioning can be reduced.

?Claiming the right to space? is an argument frequently used by street artists for justifying illegal art in the public space. The public city space as a room of democracy and right to free speech is by some people considered threatened by commercial interests, and street art has become a way to demonstrate disapproval towards this. Street art is illegal and often anonymously performed in our cities. It developed in the late 1970s from the urban graffiti scene in America, and has therefore a lot in common with the graffiti movement.

The most common types of smartphones in Sweden are iPhone and Android. Development in the IT feld is constantly changing and Windows Phone is a new operating system that has been introduced on the Swedish market in 2010. However, Windows Phone user interface is quite different from iPhone and Android.The numbers of applications for smartphones are increasing, and users are making greater demands on better  usability. Users want the application to be easy to understand and fast to bring into play.  If the application contains a bug or has other user problems, it can ruin the entire experience. If the user does not have a good experience of the application, the user will quickly stop using the application.Companies that do not have any mobile applications would probably begin with an iPhone application.

This thesis is based upon the work done at Westinghouse electric company (WEC)inVästerås during the spring semester of 2015 and describes the development of a quickcoupler with associated blade changing tool. These are meant to be used togetherwith a sawing tool that the company uses for the dismantling of nuclear reactors,which is performed under water.The aim of the thesis was to develop a complete manufacturing documentation withdrawings and related CAD models which Westinghouse later can use to manufacturethe tool and the quick coupler. It was also included in the assignment to, if necessary,modify parts of the saw tool to adapt these to the intended blade changing tool.A number of visits to the company's workshop was made during the time to study thesaw that the thesis is based upon. The purpose of these visits was to get a better ideaof the dimensions, construction and the field of use of the saw. On three of thoseoccasions various engineers and consultants accompanied us to discuss possibleproblems with different ideas.This was interspersed with information in the form of literature studies on quickcouplers to create a clearer picture of the nature of the task.When enough information had been gathered a functional analysis was made to dividethe main problem into subthis phase the idea and concept generating process took place.The methods used for this was mainly brain writing and brainstorming.

???Information Technology is an essential part of the society today, not least in large ???organisations dealing with sensitive information. An example of such an organisation is the Swedish Armed Forces which indeed is in the need of ways to ensure information security in their Information Technology systems. The means which is used is an authorisation and accreditation process.All Information Technology systems go through a life cycle which includes realisation, usage, development and liquidation. In the Swedish Armed Forces the lifecycle is an authorisation process.

Title: A Culture School?s (?En Kulturskolas?) work in an multicultural areaThis research is a study of Culture Schools in Angered which include both Lärjedalens and Gunnareds Culture Schools. The Culture Schools of today reach only a limited part of our society, and for this reason the purpose of this research has been to study a school in a multicultural area. To learn from others? experiences is an important step in work with school development.

Reducing the CO2-pollution, resulting from the combustion of fossil coal for energyproduction, is important to affect environmental changes. One way to achieve a reductionis to use the oxy-fuel technology. The technology uses O2 and re-circulated flue gasduring the combustion which results in a flue gas mainly consisting of CO2. The flue gascould then be compressed and stored without environmental effects. A problem thatfollows from the compression is the risk of acidification in sensitive parts of the process.Acidification can occur because of reactions following from the contact of condensedwater and sulphur- and nitrogen-oxides which are also present in the flue gas.This report compiles and evaluates the basis of a scientific unit with the purpose ofexploring the possibilities of extracting impurities of SOx and NOx from the flue gases.The dimensions of the unit are based on basic conditions, defined for an existing oxy-fuelprocess at Chalmers, and on the results of computer modelling.