New dwellings and commercial buildings in coastal regions has for some time now been a focal point. Old industrial harbours are regenerated into modern living areas with a recreational purpose. In Sweden the marina has not taken part in this development, thus remained in the monotony and large-scale structures of modernism. This graduation thesis looks upon the marina from a landscape architects point of view, where the marina foremost is a social venue. By revealing and discussing the development of the marina, its design and environmental consequence theories of the marinas future is presented. These theories are later tested upon the costal village of Rydebäck, south of Helsingborg. The thesis is structured in three parts: marina knowledge, proposal and resources. In the first part the historical development of the marina from prehistory time to now is discussed.

The Swedish working-class author Ivar Lo-Johansson (1901-1990) wrote a collection of one hundred short stories between the years 1968-1972. His other productions, generally speaking, have partially different social reform purposes, but, according to himself, these short stories were written with the intention to be totally free of tendencies (even though he himself doubted that he succeeded with this).During the same period that these short stories were published, the Swedish social democrats were under the challenge of radical movements that, mainly on the radical left?s ideological foundation, had a relatively strong influence in Sweden, among other countries, from the mid 1960?s to the late 1970?s. Since Lo-Johansson mainly seemed to have supported the politics of the social democrats, the purpose of the investigation in this thesis has been to see if he ? in the three short stories: Vikingakärlek (1970), Rikslögnaren (1971) and Ansgars resa till Sverige (1972) ? is conveying an ideological use of history and basic political values that were used by the social democratic party during this time period.

This report is a thesis on requests from Sandvik Mining and Construction (SMC) in autumn of 2012. The goal of this work was to study the feasibility of creating and implementing an Equalized preventive maintenance program in SMC maintenance operations and reduce downtime for preventive maintenance (PM). To investigate whether this was possible, the authors studied the current procedures for the PM. The authors have collected and analyzed all relevant information within the maintenance department reporting system as well as through interviews determined whether it is practical to introduce a Equalized PM programs. The authors had also studied the possibilities to entrust part of the maintenance work to the operators of the machine cells.

The action where form is given to inner thouhts and ideas is a creativ course of events which is difficult to grasp. The main purpose is to research how such an action can appear and function. The method which is used to research this purpose is the qualitative interview. The respondent?s inner descriptions and thoughts about a particular phenomenon is what the qualitative interview aims to elicit.

Transmission of digital signals is today more frequently used than transmission of analog signals. One reason for this is that a digital signal is less sensitive to noise than an analog, another reason is that almost all signals today are handled in a digital format. This thesis describes the development of a system that receives digital video signals through FireWire. The standard for FireWire, which is a high performance serial bus, is under development. Today the standard of the bus supports transmission of data with a speed of up to 400 Mbit/s.

Valmets own foundry in Karlstad has during a long period of time had problems being profitable. The goal today is to turn this around. Today there are three different productionlines; engine blocks, Yankeecylinders and components for the wind turbine industry. This master thesis has focused on examining if value stream mapping is a useful tool to use in a foundry, and therefore outside the typical manufacturing industry. The target has also been to evaluate if there is a possibility to improve the flow in the foundry and also the results.During the 20 weeks this work has been done at the foundry data has been collected and analyzed.

In recent times statistical findings suggesting a deteriorating mental health among teenagers, have been published. Not only did I find the lack of an all-inclusive analysis problematic, but also the fact that the studies themselves where often insufficient. Thus my purpose has been to chart these statistical studies, and then scrutinize the results.My method has been inspired by critical theory, where an interpretive starting point, self-reflection, and the idea that man and society interacts as a whole, is of great importance. Aside from the above mentioned studies, I have also employed secondary empirical data from TV, newspapers and the Internet. My own experience as a social worker has also been an important resource for this paper.

This thesis introduces Kongjian Yu?s design approach in terms of industrial heritage conservation in connection to transformation and urban design. The approach is examined respectively on two cases from China and USA. The thesis give a brief introduction to current achievement in conservation research and general profile of industrial conservation practice. Based on case and theory study, Yu?s design approach is carefully applied to an industrial area Nyhamnen in Malmö and a design proposal is produced.

Abstract: After their introduction, technical systems designed for Situational Awareness have changed the possibilities on the battlefield. Today, Swedish tanks use a system known as the TCCS. This system offers many advantages to a tank platoon, but does it also bring disadvantages? This essay examines pros and cons with the TCCS. To find these the author uses a Swedish Armed Forces analyze model in a comparative study.

The purpose of this Master Thesis is to analyze what suitable hardware platforms there are on the market in order to build a low price control and information system for mobile applications, called small display module. The thesis will be underlying material for making a decision for further development. The result of the thesis consists mainly of a Windows CE kernel and a schematic for a CPU card, on which it would be suitable to build the display module. Another major part of the report is the introduction of different techniques that could be of interest when designing a processor based system. The processor architecture that was chosen is the x86.

The Swedish working-class author Ivar Lo-Johansson (1901-1990) wrote a collection of one hundred short stories between the years 1968-1972. His other productions, generally speaking, have partially different social reform purposes, but, according to himself, these short stories were written with the intention to be totally free of tendencies (even though he himself doubted that he succeeded with this).During the same period that these short stories were published, the Swedish social democrats were under the challenge of radical movements that, mainly on the radical left?s ideological foundation, had a relatively strong influence in Sweden, among other countries, from the mid 1960?s to the late 1970?s. Since Lo-Johansson mainly seemed to have supported the politics of the social democrats, the purpose of the investigation in this thesis has been to see if he ? in the three short stories: Vikingakärlek (1970), Rikslögnaren (1971) and Ansgars resa till Sverige (1972) ? is conveying an ideological use of history and basic political values that were used by the social democratic party during this time period.

In this project a LC-MS-method for the analysis of gamma-hydroxybutyrate, gamma-butyrolactone, 1,4-butanediol, amphetamine and methadone was developed.Initially, the efficiency of the ionisation of the analytes was evaluated with respect to the ionisation technique (ESI, APCI and APPI) and the composition of the mobile phase. In the next step a number of different columns was tested in order to find the one with the greatest potential for separation of the substances in question. Using the selected column, the separation was optimised by means of experimental design and the software The Unscrambler 7.8. The parameters studied were the flow rate, the column temperature and the mobile phase composition. The response variables were the resolution between the target compounds and the retention time of the last eluting compound.These experiments showed that, in order to obtain the best ionisation, the mobile phase should consist of 5 mM formic acid in water and acetonitrile.

Today we can create digital 3D models which can be realised almost instantly through production methods such as 3D printing and computer controlled milling.What if this same technology could be applied to the development and construction of terrain parks?With snow as the material tools could be developed using similar principles to design and sculpt the surface, only on a larger scale.How would terrain park designers adapt their process to use this new technology? In this Industrial design thesis I explore how the ideas of the terrain park designer can be expressed through such a system with focus on the designers knowledge and skill without the need to learn complicated 3D programs.Sketch, create, ride. .

On July 22, 2011 a bomb detonated in the government building in central Oslo in Norway and eight persons died. Later that day, 69 people, most of them youths, were shot down and killed on the island of Utøya by a uniformed Norwegian man.The purpose of this study is to analyse Anders Behring Breivik's personality and explain why he became a killer. I have used a Psychobiographical narrative method, which serves to describe the mind of a human being, linking the mind to motives, scripts, unconscious ideas and personality.My primary sources are Breivik?s Manifest: 2083 A European Declaration of Independence and the inter-views with his father and stepfather, together with the Psychiatric Reports which were submitted to the District Court of Oslo. I have analysed in what way Breivik?s childhood influenced his behavior as an adult.

This thesis describes teh solution of two problems regarding safety on powered lawnmowers; protectning the users from injury when using the lawnmower in slopes, and when cleaning the cutting blade.The task was carried out through initial studies on a representative lawnmower. A generation of ideas followed with an evaluation to select the best solution. The winning concept was further developed to reach acceptable performance. The word resulted in a functioning prototype utilising an original way of detecting inclinations without incorrect signals. It c an serve as a platform for further development into a product.The work gives insightful experience of solving real-world problems, and especially to deal with situations where several variables and their effects are unknownPlease note that several parts of the work are confidential, and have therefore been removed from the thesis..