The first part of the thesis consists of a brief introduction to the general principles of target detection and the sensor-systems used. In the following part there is a theoretical description of the algorithms this thesis focuses on. The detection algorithms described in this paper are called Cell Average, Ordered Statistics, 2parameter and Gammadetector. Two different discriminators called Extended Fractal Features and Quadratic Gamma Discriminator are also described. The algorithms are tested on three different types of data, simulated SAR-pictures, authentic SAR-targets and IR-pictures.

The essay is about pensioners who are working out at a gym. My starting point is the research program "Culture of ageing? and the theory that pensioners in the post- and late modern society conquer new potential areas. I am studying the meeting between pensioners and the gym. How the pensioners conquer the gym, relate to their training and what makes them stay after the first introduction.

This Thesis in Military Technology deals with experiences drawn from the forced introduction of Weapons Station 01, 2009. The work aims to identify the experiences regarding the forced procurement of military equipment to see how they can develop normal and fast procurement of equipment. The main conclusions of  this work, is to achieve greater capability and increase the military utility, are: -          Common objectives and priorities of stakeholders-          Response and joint types shall determine requirements for system-          Ensure an integrated project team also at lower levels-          Engage the integrated logistic support early in the materiel process-          Include Armed Forces staff as early as possible in the testing and validation-          Prioritize work to facilitate the rapid development of decision on use (BOA)-          Provide back up for increased redundancy in the mission area .

The final thesis ?Hardy palms for scandinavian climate? describes the family Arecaceae both from a general point of view, and with individual descriptions of seven different species that are known for their coldtolerance. The descriptions of each species is brief and the intention has been to give an introduction to some specific species known for their hardiness. Seperate chapters discuss topics as hardiness, pests and other problems and a short instruction for growing palms on open land in scandinavian climate. Finally a short discussion about continued research on this topic and some conclusions ends this final thesis.

Emwiro Vibe is a complete system for seismic measurements. The functionality of the system was before the completion of this project handled using a software contruction based on a state machine. Emwitech, the company developing Emwiro Vibe, expressed a desire to replace this solution with a real-time operating system (RTOS). The project consisted of two parts. Firstly the existing software was studied, available RTOSes was evaluated, and the RTOS most suitable for the application was selected.

Emwiro Vibe is a complete system for seismic measurements. The functionality of the system was before the completion of this project handled using a software contruction based on a state machine. Emwitech, the company developing Emwiro Vibe, expressed a desire to replace this solution with a real-time operating system (RTOS). The project consisted of two parts. Firstly the existing software was studied, available RTOSes was evaluated, and the RTOS most suitable for the application was selected.

This report is a thesis on requests from Sandvik Mining and Construction (SMC) in autumn of 2012. The goal of this work was to study the feasibility of creating and implementing an Equalized preventive maintenance program in SMC maintenance operations and reduce downtime for preventive maintenance (PM). To investigate whether this was possible, the authors studied the current procedures for the PM. The authors have collected and analyzed all relevant information within the maintenance department reporting system as well as through interviews determined whether it is practical to introduce a Equalized PM programs. The authors had also studied the possibilities to entrust part of the maintenance work to the operators of the machine cells.

Transmission of digital signals is today more frequently used than transmission of analog signals. One reason for this is that a digital signal is less sensitive to noise than an analog, another reason is that almost all signals today are handled in a digital format. This thesis describes the development of a system that receives digital video signals through FireWire. The standard for FireWire, which is a high performance serial bus, is under development. Today the standard of the bus supports transmission of data with a speed of up to 400 Mbit/s.

Valmets own foundry in Karlstad has during a long period of time had problems being profitable. The goal today is to turn this around. Today there are three different productionlines; engine blocks, Yankeecylinders and components for the wind turbine industry. This master thesis has focused on examining if value stream mapping is a useful tool to use in a foundry, and therefore outside the typical manufacturing industry. The target has also been to evaluate if there is a possibility to improve the flow in the foundry and also the results.During the 20 weeks this work has been done at the foundry data has been collected and analyzed.

This thesis introduces Kongjian Yu?s design approach in terms of industrial heritage conservation in connection to transformation and urban design. The approach is examined respectively on two cases from China and USA. The thesis give a brief introduction to current achievement in conservation research and general profile of industrial conservation practice. Based on case and theory study, Yu?s design approach is carefully applied to an industrial area Nyhamnen in Malmö and a design proposal is produced.

Abstract: After their introduction, technical systems designed for Situational Awareness have changed the possibilities on the battlefield. Today, Swedish tanks use a system known as the TCCS. This system offers many advantages to a tank platoon, but does it also bring disadvantages? This essay examines pros and cons with the TCCS. To find these the author uses a Swedish Armed Forces analyze model in a comparative study.

The purpose of this Master Thesis is to analyze what suitable hardware platforms there are on the market in order to build a low price control and information system for mobile applications, called small display module. The thesis will be underlying material for making a decision for further development. The result of the thesis consists mainly of a Windows CE kernel and a schematic for a CPU card, on which it would be suitable to build the display module. Another major part of the report is the introduction of different techniques that could be of interest when designing a processor based system. The processor architecture that was chosen is the x86.

In the 1970?s it was predicted that in the beginning of the 21st century there would be a timber shortage in Sweden and a large scale introduction of the exotic tree species lodgepole pine started. An introduction of a foreign tree species means a risk of a negative influence on the forests ecosystem. Today, the stands that were established in the 70?s are middle-aged and the effect on the forest floor vegetation can be studied.

The purpose of this study was to examine what participants in the third phase (fas 3) of the Swedish unemployment program, Jobb- och utvecklingsgarantin, think about their situation, what they think about the program and if they feel stigmatized due to their unemployment. The data for the study was collected at one of the organizers of the program, which provides an introduction program for the participants. A qualitative method was used and the data was collected through six semi-structured interviews. The results were analyzed using Antonovskys theory of Sense of Coherence (SOC). The conclusions of the study were that the participants felt support from the staff at the organizer.

This thesis aims at studying the development of the party cohesion in the Swedish national parliament, riksdagen, after the introduction of preference voting in the election of 1998. The party cohesion has been measured during parliamentary sessions before and after the reform. The result of the cohesion during each of the sessions has then been compared towards each other. The cohesion was measured between the members of parliament viewed as a whole, and within the party groups during the different sessions. The research method being used has been a quantified statistical voting analysis, making the comparisons of party cohesion during the different parliamentary sessions as easy as possible.