The purpose of this paper is to analyze the driving forces and barriers which may exist at the implementation of green supply chain management (GSCM) within public organizations. Suggestions that may increase or reduce driving forces and barriers to public activities will also be provided, where such is found. The background of the study is that the public sector is such a major customer for many companies / providers, which makes the sector able to highly affect its suppliers. This essay is based on literature studies. The results showed that GSCM is a relatively unexplored area, especially applied on the public sector.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

As a student during my studies, I have been told about entrepreneurs who have red numbers in their financial statements, and there is a forest machine operator shortage in Sweden. The basic idea of this thesis was to examine the underlying factors that may have caused the problems described above. The aim of this thesis was to investigate the factors that create stress and job satisfaction as a forest machine operator. The study was performed as a comparison between forest companies own harvesting teams and entrepreneur teams to investigate if there are any differences in stress and job satisfaction between the two different types of team. The study was conducted in collaboration with SCA Skog. The material for this study was collected by doing interviews with SCA's harvesting teams. A total of 27 forest machine operators were interviewed, divided into a total of 10 separate harvesting teams. It was very similar between the different type of teams, which situations the operators experienced stress.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

This study aims to investigate how federations manage to balance the economies of scale through collaboration and autonomy. This is done through a case study on Länsförsäkringar. The lack of modern research on federations makes the federative structure an interesting field of study. Previous research has shown a general perception that an increased pressure on efficiency and economies of scale creates a stronger common unit that eventually creates an imbalance in the federation. It is therefore interesting to look at the balance, which exists between the member units and the common unit of a federation.

The purpose of this Master thesis is to examine whether the term elasticity is relevant and functional to apply to public library organisations. Another aim of the thesis is to relate the term elasticity to public library organisations in a network society. Sociologist Manuel Castells provide the theoretical framework on the network society. Three investigations (meant to complement each other) in two Swedish public libraries seek to give answers to these questions.To be able to examine which areas of public library activity are elastic, I make a rough definition of what public library organisations consist of ? nine activity fields are identified using IFLA?s guidelines in combination with Swedish law of public libraries.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

The primary function of a mixer is to keep a fluid in constant motion. All mixing applicationsrequire varying degrees of small-scale turbulence and bulk flow. The performance of asubmersible mixer is measured by the thrust that it produces, while the strength of the bulkflow is dependent on the total amount of installed thrust.In a mixer, the fluid quickly flows past the propeller, and as a result, the current is mainlyaxial. The fluid will also obtain a rotating velocity, or a swirl, though this is significantly lessthan that of the propeller. During the process, the total amount of energy increases in the formof static pressure and kinetic energy.

Syftet: Målet med studien var att utvädera kliniska intraorala foton som diagnostisk metod för att bedöma tandslitage (attrition, erosion och abrasion) och jämföra dessa bedömningar med kliniska registreringar. Material och metod: Studien genomfördes på Tandvårdskolan i Malmö, där man slumpmässigt valde ut 30 vuxna patienter. Dessa patienter undersöktes med avseende på tandslitage (attrition, erosion och abrasion) och kliniska foton togs. En månad efter kliniska registreringen gjordes en bedömning av de kliniska fotona, utan att ha kännedom om resultatet av de kliniska registreringarna. Båda undersökarna har på samtliga patienter utfört klinisk registrering och fotobedömning oberoende av varandra. Intra- och interobservatör överensstämmelse uppskattades genom Cohen?s Kappa- koefficient. Resultatet: Intraobservatör överensstämmelsen mellan bedömningar av foton och kliniska registreringar var måttligt-till-god med ett P-värde på 0,039-0,046.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

Habia Teknofluor AB makes parts of PTFE. With their process they reaches a pressure of 250bar at maximum. For their parts to improve they need to reach 400bar at least. We will give suggestions that can solve their problem. All our suggestions is described in the report with a conclusion.

The aim of this study was to investigate the intraoperative surgical stress response in dogs undergoing ovariohysterectomy and to compare acepromazine and medetomidine as premedications. 15 dogs diagnosed with pyometra were used in this study. Blood pressure and heart rate were used as parameters to measure surgical stress response. The surgery was divided into four phases. Phase 0 was the period 10 minutes before the skin incision, phase 1 was skin incision and opening of abdomen, phase 2 was manipulation of uterine horns, ligation and transection of mesovarium and phase 3 was ligation of cervix, removal of organs and closing the abdomen. The results showed that phase 2 was the most intense phase of surgical stress, regardless of which premedication the dogs received. When acepromazine and medetomidine were compared the results showed that within phase 3, all dogs that were given medetomidine had higher blood pressure compared to dogs that were given acepromazine. The dogs that were given acepromazine had higher heart rate than the dogs that were given medetomidine in phase 0, phase 2 and phase 3. .