In this study we examine trade patterns between Turkey and 13 member states of the European Union and how these have developed over the time period of 1983 ? 2006. To represent the industrial and agricultural goods included in the study we look at the United Nations Standard International Trade Classification (SITC). Following, we investigate internal differences in the EU by selecting four countries each to represent the Northern and Southern countries of the EU. Internal differences were studied in relation to the amount of trade occurring between Turkey and the Northern and Southern countries.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

The combustion engines in today?s vehicles are getting more and more advanced and there are increasing demands on that the engines should operate during optimal conditions. Examples of internal combustion engine parameters which may be carefully controlled are the rate between fuel and air, that this gas mixture is homogenous enough and that it is ignited at the correct moment. Moreover, the requirements of these parameters vary depending on, among other, engine speed and load. To meet these requirements in all occurring operation conditions, it is required that many subsystems work together.

Fruit flies (Tephritidae) are serious pests that cause enormous losses for farmers in many countries. The frequent use of insecticides in controlling fruit flies in fruits and vegetable has not resulted in sustainable management of the pest. Problems associated with this complete reliance on chemical control are many residues of insecticides in crops, health problems for farmers, contamination of water and soil, insecticide resistance development and decrease in natural enemy populations. The implementation of control measures that do not imply an added burden to the environment and/or the farmers is urgent. More knowledge about the ecology of fruit flies is the basis for finding new and better ways to control this pest.

Objective: The papers objective is to create a deeper understanding for whether or not cultural and psychic distance affects corporate establishments in the EU.Method: The results have been gathered through intense data collection through interviews with ScaniaAB and Business Sweden. There has also been extensive research of 36 different companies and their first establishments in different countries. We have then analyzed the results through cultural and psychic distance and through Uppsala University's internationalization process model.Conclusion: The conclusions of this paper are:Corporate establishment often occurs in neighboring countries because of the similarity to the domestic markets which contribute with a greater security.Since the introduction of the EU single market, corporate establishments have become easier within the single market.The cultural and psychic distance does exist within the EU, however the internal market decreases these distances and the impact on corporate establishments.The market commitment is essential to the corporates survival within the new market.Cultural and psychic distance affects small firms more often since their lack of network and experience.Cultural and psychic distances are two different but related phenomena..

The focus of this thesis is primarily in electronic construction and describes the design process for a microcontroller circuit board from concept development to prototyping. The client develops test fixtures for automated testing of products within the electronics industry and needs a new controller circuit for the test fixtures that can handle controls and basic testing. An investigation into the needs of such a system is conducted and a prototype printed circuit board assembly is manufactured.The prototype is developed with focus on protection against electrostatic discharges and overvoltage. Among the functions that are included are voltage measurements, communication interfaces and control of input and output currents. Firmware for the prototype is developed and configured to communicate with a PC through USB interface for control and collecting of measurements..

This thesis deals with the numerical 3D simulation of a four stroke, spark-ignited, internalcombustion engine, which is mounted on a high performance motorcycle. The work, carried outin collaboration with Politecnico di Milano and MV Agusta, focuses on the simulation of theintake, compression and expansion stroke, including combustion simulation, using an opensource CFD code.Simulation of internal combustion engines offers a great challenge in the field of CFD research.Moving boundaries of the solution domain, caused by the motion of the piston and valves, leadsto deformation of the computational grid, with decreasing quality of the solution as result. Basedon this, a previously developed mesh motion strategy was employed where a number of meshesare used to cover the whole simulation cycle. Within each mesh interval the internal cell pointsof the mesh are moved to account for the boundary motion of the piston and valves. This strategywas previously applied to simplified geometries as well as real engine geometries.

Around the 1950s an explosive population growth started in the Third World. Parallel with the population growth a global network grew up advocating population control and limited population growth. Sweden had a unique place in that network through a pioneering role promoting the issue in the UN organization. During the 20th century Sweden was a pioneer country in terms of initiatives for population control. Ceylon family planing pilot project was something new in a time when other donors considered family planning be too controversial area for bilateral aid projects.

Around the 1950s an explosive population growth started in the Third World. Parallel with the population growth a global network grew up advocating population control and limited population growth. Sweden had a unique place in that network through a pioneering role promoting the issue in the UN organization. During the 20th century Sweden was a pioneer country in terms of initiatives for population control. Ceylon family planing pilot project was something new in a time when other donors considered family planning be too controversial area for bilateral aid projects.

Pathogenic microorganisms pose a big threat towards food production. Meanwhile, negative impacts on humans and environment are seen by the use of pesticides. Biological control agents are an alternative to the use of chemical pesticides, and plant-growth promoting rhizobacteria, such as Bacillus amyloliquefaciens has been shown to have good properties as biocontrol agents. Before these bacteria can be used commercially their impact on other soil organisms has to be evaluated. This thesis looks into what biocontrol bacteria are and how they might affect earthworms.

Background: A great part of all projects within Swedish industry are conducted in a multiprojectenvironment, which means that several projects are performed simultaneously. The research within the field of project management is though focused on single projects. Projects are highly dependent on the context in which they are conducted, although the organization of the multiprojectenvironment is only partly explored. Furthermore is the research within the project management highly concentrated on standardization of the project work. The question is whether this implies to the basic advantages with the project-oriented organization, which is flexibility and creativity? Purpose: To describe and obtain an understanding for the multiprojectenvironment regarding management control and organization.

This report describes a thesis done at the Jönköping University of Technology. The aim of this thesis was to create conditions to optimize an existing automatic electrostatic coating system by changing the technology for dispensing lacquer. To select the technology, a study of different dispensing techniques carried out which concluded that the piezoelectric membrane and electrostatic atomization are the most interesting techniques.In order to perform tests with dispensing techniques a demonstrator has been optimized. The controller and PC software of the demonstrator has been programmed to be able to send out PWM signals that control the dispensers. An adapter card was designed to control the piezoelectric membrane and a steering link to the electrostatic atomization has been developed for PWM signals up to 500V.The work has laid ground for a demonstrator where further testing of the dispensing technologies can be performed..

This study highlights the differences in articulation, nasality and intelligibility between twenty 16-year-olds and thirteen 19-year-olds born with isolated cleft palate and control groups. The test groups are compared in a longitudinal perspective and based on earlier evaluations of velopharyngeal impairment. Significant differences were found between test groups and control groups using quantitative comparisons based on SVenskt Artikulations- och Nasalitets-TEst and NasometerTM. The longitudinal comparison also showed a positive but not significant development of the speech. Differences emerged in the comparisons based on velopharyngeal impairment but no significance analysis was made.

This study aimed to investigate whether lambs show anticipatory behaviours in a holding pen prior to entering a known arena, whether the holding pen experience prior to the arena exposure affects their play expression in the arena and whether their behaviour (in home pen) is affected if arena access is denied. Twenty pair-housed male lambs (average 14 weeks old), were exposed, in chronological order, to five treatments. Holding pen treat-ment (HP-control): Each pair was led into a holding pen (2.7 m2) and remained there for 5 minutes before returning to their home pen (6 m2). Holding pen ? arena treatment (HP-A): Each pair was led into a holding pen for 5 min and then was allowed access into the arena (22 m2, containing two hanging chains, one ball and one platform) for 15 min before re-turning to their home pen.

Hur en verksamhet skall förbättrar sin interna styrning genom användning av kundinformation är ett omdiskuterat ämne. I studien ?Kundinformationen utvecklar den interna styrningen?. Undersöker författarna hur företag som tillämpar användningen av CRM i sin vardagliga verksamhet, har möjlighet att effektivisera för hur de skall nå sin vision. Detta möjliggjordes genom att fråga ett antal verksamheter, hur de ser på vikten av användandet av IT ? relaterade verktyg.