The running of gas turbines with low emissions causes high pressure pulsations to arise in the combustion chamber. These pulsations are high amplitude sound vibrations. At some frequencies these are harmful to the gas turbine. Hence these pulsations are monitored to avoid operating conditions where pulsations are specifically harmful. It is necessary to expose the system of known pulsations to verify the functionality of the monitoring process.

Abstract Over the years the consciousness of risk has grown. It?s hard to influence risks, therefore there are guidelines stating that significant risk must be included in the annual report. This paper is a case study; the purpose was to examine how four Swedish listed companies chose to disclose their internal and external risks. Risk is initially described in general sense and then it figures to what constitutes an economic risk.Through a case study of four Swedish listed companies? annual reports we have, through qualitative methods found how the companies chose to disclosure their risks.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

Cremated remains have long been regarded as a highly complex material that often provides unsatisfactory results. This essay discusses the problems that arise when methods commonly used on unburned bone material are used in a cremated skeletal material. The present essay discusses the results from osteological analysis of seven cremations from Pre-Roman Iron Age from a large cemetery in Alvastra, Smörkullen. Several methods were ultimately not applied in the present study as they were insufficient for application on the relevant material. Since the methods were inapplicable and fragments available for gender assessments too low, no sex assessments were made.

Abstract Over the years the consciousness of risk has grown. It?s hard to influence risks, therefore there are guidelines stating that significant risk must be included in the annual report. This paper is a case study; the purpose was to examine how four Swedish listed companies chose to disclose their internal and external risks. Risk is initially described in general sense and then it figures to what constitutes an economic risk.Through a case study of four Swedish listed companies? annual reports we have, through qualitative methods found how the companies chose to disclosure their risks.

The objective of this study was to assess validity and reliability for five different owner-completed instruments evaluated to assess chronic musculoskeletal pain in cats. All of the instruments were questionnaires, three asking about behavioral changes, one about the degree of pain and one about quality of life. One of the instruments was written originally in Swedish, the other four instruments were translated into Swedish before use. Data available were records from 57 cats with no signs of pain and 11 cats with different pain-related diagnoses. The diagnoses were ensured by clinical examination including palpation and manipulation of joints, gait testing on a force-plate and X-ray scans. Instrument 1 was completed by 57 pain-free and 11 pain-affected cats.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

Denna rapport behandlar push-teknik, en teknik för att skicka data i realtid inom webbapplikationer.Många gånger i dagens mer interaktiva webb kan ett behov finnas av att behandla data på ett alternativt sätt. På grund av detta kändes det valda ämnet relevant inom ramen för webbutveckling.Syftet är att undersöka hur vida denna teknik skiljer sig mot andra tekniker för att transportera data. För att kunna undersöka push-tekniken har en applikation skapats med hjälp av ett ramverk för detta ändamål. Som ramverk för arbetet valdes APE som innehåller en komplett lösning för push-teknik på webben.Som underlag för rapporten utvecklades en spelapplikation samt en utvärdering av ramverket APE och ett antal prestandatester gjordes..

Dione kullager AB is a company in Uppsala, which sell industrialmachinecomponents, transmissionsolutions and provides repair serviceof hydraulic components.When a hydraulic cylinder is about tobe repaired it needs to bedisassembled. Because hydrauliccylinders usually work in dirtyenvironments and are heavilyworn some types of cylinders arealmost impossible to disassemble.Today the disassemble is made by hand,which means extra work for themechanics. In order to facilitate thedismantling of this type of cylindersa machine is to be developed for thispurpose and this is where this thesisbegins.The thesis has been organized in threephases: Literature study in whichfacts and theories are acquired.Concept generation in which differentconcepts, calculations, and solutionswere identified and selected. Thedesign phase where all the differentconcepts of components were assembledand simulated in SolidWorks. Similarstructures have also been studied inorder to identify necessary functions.The thesis resulted in a structurewhich is believed to meet therequirements.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

The project description is to draw an extension or annex to the existing Nationalmuseum building from 1866.The annex is designed to complement Nationalmusems activities and contain internal and public functions. Artentering the building must not be crossed by public visitors. Art and staff must be able to seamlessly move betweenthe extension and the main building. The new building includes a public study room for scholars working withthe collection of art on paper, workshops, conservation studios, art spaces and warehouses. Additionally, theannex is designed to host a large number of office spaces.With the renovation of Nationalmuseum they intend to open up the today built in south atrium.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

Development and accuracy tests of advanced exchange trading systems require well adjusted tools for testing. Aptness of these tools are probable to have a major impact on identification of bugs and verification of new functionality. Identifying erroneous parts and bottlenecks of the trading system is of outmost importance for the exchange as a whole since stability and correctness are two of the determinant factors its viability is measured by. This paper covers how this test-tool was created and the motivation behind the design choices made. The tool was created with the goal to be broad enough to cover the majority of cases that could arise, fast enough to be able to test the trading systems speed limitations (i.e.