Sweden has distinct seasons with cold winter and temperatures down to minus 25 ?C andpleasant summers with temperatures above 20 ?C. During spring and autumn there could becomechallenges with precipitation. The diverse climate in Sweden affects many homeowners. For thepeople living in leisure boats and permanent housing boats the seasonal changes are clearlyimpacting their economy and the indoor climate.

An uncountable number of companies are present in foreign markets as a result of what we commonly choose to call globalization. This is especially true for Swedish companies traditionally operating on small markets. A company that is about to establish on a new market is faced not only with possibilities but also with challenges and risks. Researchers have found that companies that establish on foreign markets will have to deal with competitors on the national as well as on the global market, and therefore need consider how they globalize their brands. In addition to this, a brand can only reach international success if its message is coherent within and across every single market.

This diploma work, with the title Represent and Consume the Land ?I drove following the picture of a spruce through Sweden, is presented as a film and an essay and the aim is to explore the perception of an individual with the film as the medium. To reach this, it is necessary to destabilize my own reality, to explore myself at the same time as I study landscapes and representations of landscapes. The diploma work focus on representations of landscapes of Sweden, external pictures and internal images. The picture is a very strong medium that holds and comunicate myths, about the landscape and about the nation.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

Glass has sophisticated front properties and are used as facades in high buildings. During cold periods, these glass facades could cause thermal discomfort, due to cold downdraught. Cold downdraught can be countered by placing heaters under glass surfaces. Nowadays technology offers highly insulating windows, which is why there is an interest to investigate the indoor climate with only underfloor heating. The research in this area is limited, and few empirical methods are available.

This degree project concludes the Innovation and Design Engineering programme at Karlstad University. The project was carried out by David Brocker, Erik Hallberg and Andreas Hertzman during the spring of 2006 and corresponded to 15 weeks of work per student. Assigner was Martin Larsson at Arexor and instructor at Karlstad University was Monica Jakobsson.Arexor has a patent to a construction of an electrical skirting board with moveable wall sockets, called Electrical Track System. The lowest parts of the interior walls along the floor are today almost always covered by a conventional skirting board. Arexors patented product replaces that with the possibility to move and increase the number of wall sockets by choice along an electrical skirting board.

This report deals with issues related to construction waste. Building material that has not been built into the project is defined as construction waste. Cost of construction waste amounts to 4-12 % of the total cost of the project. Moreover, cost of construction waste is 1-3 % of the production cost. The aim of this study is to increase knowledge about the main causes of waste within the construction industry.

Sitka spruce (Picea sitchensis (Bong.) Carr) is just like Norway spruce (Picea abies) a species in thegenus picea. The natural range of Sitka spruce is a narrow strip along the west coast of North America. Itis the most coastal of all picea species, and very dependent on the mild and humid climate along thepacific coast.Sitka spruce has been grown a long time in the countries around the North Sea, particularly in GreatBritain where it currently is the most important species in British forestry. Sitka spruce has not beenplanted in Swedish forests to any large extent before the storm Gudrun in 2005. Several studies indicatethat the production of wood biomass is higher for Sitka spruce compared to Norway spruce.

Thesis completed by Johan Arvidsson, Alex Rasooli and Pontus Winroth, students at master program Product development and Design at the School of Engineering in Jönköping Sweden. The project comprises 30 ECTS credits and was carried out during the semester in the autumn of 2007.It was carried out in cooperation with Eksjöverken AB, subcontractor within the truck industry with special knowledge within the area of complicated machinery construction work. Job initiators at Eksjöverken were Mats Svanberg and Kjell Nygard. Dag Holmgren was acting as a tutor from the university. The task was to develop tools for trucks, primary toolboxes but in case of time also under run protection.

The business cycle of the wood flooring branch is currently high however that situation may not be sustainable. In a possible future weaker business climate, the importance of marketing becomes accentuated for firms that aim to maintain their sales levels. We can see trends that competition among the Swedish and foreign manufactures is already stepping up. The intent of this study is to establish marketing guidelines for floor- and molding manufacturers, so they can establish a clearer brand image in DIY retail outlets. By comparing the approach of sports- and DIY stores to brand and product placement, this study aims to bring new knowledge to the DIY branch for improved consumer and product handling.

As we travel more and more by train it becomes increasingly important that the time we spend traveling, is of great quality. This has been the foundation of this master thesis and has shaped the outcome of it. The traveling experience, that is, the experience of the landscape that flashes by outside the train window, is an important aspect in railway planning and an aspect that should be taken into greater consideration. The purpose of this master thesis has been to examine how to compose or improve the travel experience for an already planned high speed railway and how the travel experience can be combined with other aspects, which have claims on the landscape. This thesis is based on a literature study and a case study of Ostlänken. The work describes Ostlänken, a planned high speed railway in Sweden between Järna and Linköping, with top speeds at 300-320 kilometers per hour.

The City is filled with signs of life. It teems with human traces waiting to be discovered. Street art of different kinds prevails behind traffic signs, on posts and electrical boxes. Personally con-structed dogs guard roundabouts all around Sweden and small gardens spire underneath window ledges. In this work I want to identify these phenomena and find out what thoughts inspired these creations.

One of the distinguishing features of successful societies is the ability to adapt to change, bothsocial but also natural changes like climate change. Climate change is a complex, dynamic,non-linear process with a great deal of uncertainty concerning the time perspective, risks andconsequences. A combination of factors like climate change, geographical vulnerability, adensely populated and highly built up coast line along with factors like deficient handling ofsurface runoff and a large usage of ground water leads to an increasingly vulnerable society. Italso puts a greater pressure on the society to have preventive measures in place.The number of actors working with preparing society to the expected impacts of climatechange and variability is increasing. However more than half of Sweden?s municipalities donot consider changing climatic conditions when planning, and many times even allow theconstruction of new living areas in known climatically vulnerable areas.

This study is a value chain analysis for timber in East Africa. It was commissioned by Vi Agroforestry, a nongovernmental organisation registered in Kenya, Rwanda, Uganda and Tanzania engaged in a rural development program that involves promoting tree planting and enterprise development (Vi Agroforestry, 2012). The purpose of the study was to identify and describe common value chains for timber in the countries where Vi Agroforestry operated. Value chain is a concept and a framework describing how to structure information regarding activities included in satisfying a certain customer need, e.g. procurement, logistics, transactions, production and marketing.