AbstractOur bachelor degree thesis was carried out in collaboration with Ivar Petterssons Järnmanufaktur AB in Smålandsstenar. We were asked to replace their wedge housing, used to fasten the wires to the power lines, with a similar structure in a plastic material. The idea for this project started with Ivar Petterssons Järnmanufaktur AB having problems with the casting quality that forced them to perform expensive tests on each of the wedge houses to ensure the quality. They are currently produced in China which is also a major drawback because it requires expensive long delivery times.The method we used is Fredy Olsson's Princip- and Primärkonstuktion (1995). We have consistently been in the project on so-called "broad front", which means that you create several sketches, ideas and changes in parallel, and then evaluates all.

There are plenty of exciting changes being developed in Tre Högar´s Park, which is located in the district of Linero, eastern Lund. A project group representing Linero If, Lugi Tennis and Linero/Östra Torn Health centre, has been created and is responsible for managing a development project of the Park. Their main focus is to create sports, exercise, health-promotion, health-care, recreation and rehabilitation facilities. They view the park area as having great potential and will transform it into a purpose built park for Health and Exercise. There are various authorities involved with and engaged in the scheme; aside from the project group, the municipality of Lund, The sport association of the handicapped and local schools are being consulted.

In this report focus is put on the combustion process at a cement plant. Combustion is the heart of the cement making process and absolutely crucial to have under full control and well optimized. The fuel is put into the process through a burner pipe and this burner pipe is modified to reach a more efficient combustion. The primary target is to enable burning of heterogeneous alternative fuels and increase the production level. Other positive effects from this type of optimization is lowered specific fuel consumption and lowered CO2 emissions. A redundant burner is chosen for the project and overall the project steps are the following: 1. Installing a Jet air nozzle ring in a way so it can move both axially and radially due to temperature changes. 2.

This degree project focuses on the importance of being professional doing a job at the same time as being able to express one self in a professional way. The degree project also focuses on how the work as an environmental- and health inspector could be made easier by making the inspectors aware of their language and open to change. Finally the focus of this degree project lies on how positive contacts can be made with people despite them being informed of difficult or unwanted things.In order to get an overview of the inspectors? communication skills today the environmental- and health inspectors at the environment office in Laholm´s municipality were evaluated. The inspectors´ communications styles and languages were checked on the basis of the ?nonviolent communication model? by Marshall Rosenberg.The content and the result of this report were presented for the head of the environment office, the chairman of the committee and the participating inspectors in Laholm´s municipality.

En studie av teaterdekoratören, konstnären och arkitekten Louis Jean Desprez' betydelse för Gustaf III nationella projekt, att förena sitt folk och skapa en nationell identitet med hjälp av opera och teater..

LEDAthe chair as representativean exploring work on added value throughaesthetics and function.The project deals with portraying a chair. A chair thatwill raise questions regarding added value, questioning oursurroundings and not taking things for granted. Through anumber of properly selected words, I have built a collectionof objects that possess the basis of a chair. The words arebased on sources of inspiration; I picked up over the yearsand can be seen as a part of me and my inner self. QuestionsI asked myself concerns the impact of aesthetic and how itrelates to the function.

To me, competing in architecture has always been slightly odd and at the same time exiting. These competitions are one of few occasions were architecture is almost like art. The competition generates a variety of ideas and projects and these are often expressed in a more appetizing and artistic way than traditional architecture. It?s also an art to master the special circumstances and requirements of a competition.

The built environment should be accessible for everyone. A residence shall be functional without creating a handicap for people who have a disability from birth, caused by an accident or of old age. A residence that is accessible creates equal conditions for everyone.In this report the accessibility of newly built blocks of flats in Uddevalla city from 1990 until today are interpreted. One project that is yet to be built is interpreted and compared with the already existing projects. The apartments of seven projects have been analyzed according to today?s regulations of accessibility.

This study is predominantly qualitative. It is also descriptive to a large extent and notoriented towards hypothesis-testing. The study aims at studying what has influenceddigitization of old Swedish dramatical works through the Dramawebben projekt, whilefocusing on the technical solutions. Four different data collection methods have been applied.Interviews and a questionaire with open-ended questions were the two primary tools. Adocument analysis and observations were applied as well.Examples from earlier research to relate to questions about digitization as an institutional andsocietal practice are presented.

This report aims to describing the work behind the development of a masonry heater.The masonry heater is developed in collaboration with the company Transient Design KB that is a product development company located in Alingsås. The company sees a possibility to cover a market segment where modern technology and design are missing.The report presents those methods and approaches that have been used and gives an overview to how the project has been carried out. It describes how the ideas behind the final results have produced and how they have been developed during the project's time. In the report you can also read about the final concept with its choices of construction and materials.The report is completed with a presentation of a final concept and a ground for possible future production..

This paper presents the creation of a strengthening visual profile for StretchFlex UF. The project consists of an external as well as an internal part. The external part is on the order of the company StretchFlex. The company is created under the education concept by the name of Ung Företagsverksamhet (Young Entrepreneurship) and has passed on to the Swedish Championships in Young Entrepreneurship at the Stockholm International Fairs. Of that we have been commissioned to develop an updated logotype for the company, for the current does not keep proper quality according to the client.

From a view of health strategies and techniques this thesis wants to throw a light on how the individual in its"health thinking"is governed. A thinking that, according to the author, can lead to a new way of governing as in municipal activity, an activity whose focus is on health and ill-health. The study is done whit a theoretical approach of power, with qualitative interviews as method and analysed from a perspective of Governmentality. The object for the study is Socsam and Rehabrådgivarna in Finspång. Socsam is a local project, and their main task is to create cooperation between health- and medical services, social services and social insurance.

The purpose of this study is to create a method that can be used to produce decisionsupport data for the climate goals of a municipality. The method should be able to demonstrate the potential for reducing energy use and greenhouse gas emissions for measures aimed at the stationary energy system in the municipality. It will be used to make longterm projections of energy use and greenhouse gas emissions in order to be able to demonstrate the ability to reach climate goals. The aim was also to test the method's applicability by using the municipality of Uppsala and the Uppsala climate protocol project in a case study. Uppsala climate protocol is a project consisting of participants from business, government and organizations that voluntarily want to commit to reducing their carbon footprint by reducing their energy use and thus work to achieve the municipality's overall climate goal. Public reporting of energy use and climate impact has been studied in order to examine the nature of indicators and accounting figures that are commonly used in the field and how long-term forecasts are formulated. In connection to this, the type and sources for the kind of data needed was also examined.

This thesis has been carried out in cooperation with Burseryds Bruk AB.Burseryds Bruk is a company that manufactures steel strapping. The thesis isabout developing a concept of protection that should be used to protect theoperators from the rotating parts of the machinery lines. The aim of the projectwas to improve work safety for operators working at the machines by producing aconcept for a protective device. The project's first part was based on ergonomic data collection methods tounderstand the operations performed on the machine and the hazard occurringduring the process. The methods used to collect data were, interviews,observations and questionnaires with the operators of the company. This was thenused to make the ergonomic analyzes hierarchical task analysis and link analysis. The data collected from the company's operators was used create 10 conceptswhich were then evaluated.

Background: Several accounting scandals have caused a development from rules-based to principles-based regulation. Swedish municipalities follow the principle-based recommendations issued by RKR (The Council for Municipal Accounting). An explicit requirement of component depreciation has been introduced prior to 2014. The principles-based regulatory framework raises some choices regarding the introduction and demands that professional judgments are made. There is some risk that comparability decreases.