The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

The running of gas turbines with low emissions causes high pressure pulsations to arise in the combustion chamber. These pulsations are high amplitude sound vibrations. At some frequencies these are harmful to the gas turbine. Hence these pulsations are monitored to avoid operating conditions where pulsations are specifically harmful. It is necessary to expose the system of known pulsations to verify the functionality of the monitoring process.

The objective of this thesis was to present a design proposal on a modular mechanicalstructure for a nanosatellite. The size of the structure should follow the CubeSatstandards. This standard divides satellites in units (U), where 1U is equivalent to acube where sides measure 100 mm. 2U corresponds to the same volume and size as2 assembled 1U structures, and so on. The focus was to develop a structure in theorder of 3U and 6U.At the integration in the satellite launch rocket, there are a couple of differentinterfaces, where the structure is adapted to common ones; P-POD and CSD.

We choose to revise the need of dental care in horses. How important is the dental care for our horse´s use and for their health? The objective of this work was to see if there is a difference between Swedish veterinaries and educated horse dentists opinion concerning horse dental care. As horse owners, we have experienced that there is a conflict between the opinions of these two occupational groups. Some veterinarians say that there is a tendency to use to much treatments or instruments in horses mouths, while some horse dentists says that there is not enough treatments done in horses´ mouths.

 SammanfattningKravhanteringsprocessen är en av de viktigaste faserna vid utvecklandet av ett IT-system. Kravhantering är alltså grundläggande för att utveckla ett stabilt system som uppfyller beställarens önskemål. Med en väl utförd kravhantering som grund får man ett system som är fritt från bristfälliga fel, utvecklandet av systemet går även till på ett effektivare sätt. Vid byggandet av ett system eftersträvar man alltid en framgångsrik mjukvara. Kravhantering ses som den viktigaste faktorn vid utvecklandet av ett IT-system.Föreliggande studie genomförs som en litteraturstudie där undersöks vilka brister som är vanligt förekommande under kravhanteringsprocessen.

In tune with the cross-border trade the infringement of intellectual property rights has become a growing problem in Europe and the rest of the world. In June 2008 negotiations about a new international agreement was initiated between Europe, its member states and ten other countries, which will restrict infringements of intellectual property rights. The agreement is called ACTA, which stands for Anti-Counterfeiting Trade Agreement. On January 26, 2012 the European Union (EU) and twenty-two of its twenty-seven member states signed a letter of intent to the agreement and the EU?s internal processes of the agreement began.

Abstract Our intent with this study was to find out what changes have been made during the last 30 years in the way that the media reports from certain events. We choose to study the world of football and specially the Swedish national team and it?s relationship to the Swedish television medium in the World Cup of 1974 and the World Cup of 2006. The study mainly focuses on the differences in commentary and in the production from both of the championships. We used Keith Selby and Ron Cowdery?s book How to study television and Mats Ekström and Lars-Åke Larsson?s book Metoder i kommunikationsvetenskap as tools to analyze the games we watched. The result showed that there?s been a lot of changes media wise between the two championships.

The purpose of this study has been to examine a few Swedish advertisment producers opinions on the subject of viral advertising and especially the ethical aspects of hidden viral advertising. The specified purpose of this paper is to:To clarify the underlying reasons for the use of viral advertising.To clarify the advertising producers ethical views on hidden viral advertising.The essay is based on a qualitive research metod of an abductive nature where the empirical data is derived from interviews with three advertisment producers. Through a stratified selection method we contacted agencies that in one way or another uses digital solutions as an advertisment method. All interviews were conducted via the digital chat room Skype, one of the interviews were conducted with both picture and sound and the other two with audio-only.The following points are the essential conclusions of our study:Hidden viral advertising is seen as a rare promotional method in Sweden today, however, the viral-spread effect is more commonly used.The economic factors together with the spreading capacity of the viral advertising is contributing to one of the biggest reasons behind the use of viral advertising. In addition to these, viral advertising is seen as an effective way to stand out from traditional advertising.Viral advertising where the sender is hidden or unclear is always seen as unethical.

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

What does the Swedish church Västerås stand for today according to the employees and how do they want to profile themselves to the target group? What image and what expectations does the target group have of the Swedish church Västerås? How can the Swedish church Västerås communicate uniform, with the intent to create mutual value with the target group?The purpose of the study is to make recommendations to the Swedish church Västerås for their prospective communication plan by examining their profile and target group's image and expectations of the organization. The study also aims to examine how the Swedish church Västerås can communicate their brand uniform.The study applies a qualitative research with deductive approach. Data were collected through semi-structured interviews with a sample of the employees and focus groups with a sample of the target group.Better match between profile and image means that SkVs employees better understand the organization and can communicate more uniform which leads to a stronger brand identity. If SkV understands what is relevant for their target group, they can reduce the total cost of customer delivered value and thus increase the total value.

The aim of this thesis is to investigate if an automation of the manual packaging process at Legosan AB is profitable. Legosan AB, located in Kumla, performs subcontract work of dietary supplements and medical products to companies within Europe. The chapterportal robot is used in the other. As there are several options in the choice of packaging robot the suggestions of improvement are divided into two different designs. Other machines and equipment necessary for the different suggestions of improvement are showed and their measurements are presented.

The students have been assigned a task from Consid, were they are supposed to develop a web based platform for handling the company?s consult CV:s. The key features of the system are to simplify the administration part at mission procurements towards customers and to match qualified consultants to certain missions.Consid is an international it-consult company and have about 1000 consults working for them. When Consid makes mission procurements towards a customer they have to manually match the best consult against a certain mission, this is both time consuming and complicated.The students started the project with big visions and thoughts about how the work would be performed and how the system would be developed. After the initial meetings and the closer it came to the beginning of programming it became clear that the expectations were too big.

The development in electronics increases the demand for good design methods and design tools in the field of electrical engeneering. To improve their design methods Ericsson Microwave Systems AB is interested in using computer tools to create a link between the specification and the implementation of a digital system in a FPGA. Xilinx System Generator for DSP is a tool for implementing a model of a digital signalprocessing algorithm in a Xilinx FPGA. To evaluate Xilinx System Generator two testcases has been designed. The testcases are selected to represent the FPGA designs made at Ericsson Microwave Systems.

AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.