The purpose with this study is to compare different systems of grain storage from a financial point of view. Grain that is supposed to be fed to laying hens. The systems that were compared were different airtight storage of grain and a system of conventional storage. To make this case study I choose to compare four different systems. In the case study there was one system with bin drying of the grain, two systems with airtight storage of the grain and one system where you buy dried grain during the season. I made several of capital investment appraisal where I found the cost of each system, then I took the cost and divided it with the total grain use and calculated the cost for each kilogram of grain, and also the cost of the feed. Then I compared the cost from my case study with the cost of buying feed. All the systems except for one, gave a lower cost for the hen feed than buying feed from a dealer The best system, witch were bin drying lower the cost with about 80 000:- SEK.

Simulation means running a model of a system with suitable input and observing the corresponding output. Real-time environment simulation is a special kind of simulation used to simulate a control system's environment in real-time. This is done to test the control system before it is used in its real environment. In this project, computer simulation of a certain kind of environments, called track-based systems, is studied and a general model for track-based systems is developed. In this model, track layouts are represented by graphs, which is a flexible and extensible representation and a method for visualizing these layouts is presented.

This project was started within the Market-Design programme of Elforsk, with the aim of developing representative test systems of Swedish distribution networks. Using such test systems as a basis for reliability and customer interruption cost calculations makes it feasible to analyse the network tariff regulation of Swedish power  istribution companies. In particular, it enables studies of the incentives for companies to invest in system reliability. Until now, the available test systems are either not representative of Swedish conditions, or too small in scale and limited in function.Within this project we have created two test systems. In order to represent the diversity of actual Swedish distribution networks, we have created one test system for urban environments and another for rural environments.

This thesis aims to analyse ontology, primarily as the word is used in the context of the Semantic Web. One of the main questions is how ontologies relate to classification and thesauri, two concepts well known within Library and Information Science. The vision of the Semantic Web, a more intelligent addition to the current World Wide Web, has raised the question of how to deal with information scattered over a multitude of locations, stored in different formats, written in different languages et cetera. This issue is in many ways similar to the classical problems encountered in library science: how to classify and categorise large amounts of information. The use of ontologies is one of the main steps leading to the Semantic Web, as well as a tool which can be used in other areas of information organisation and management.

The implementation of a material requirements planning system is a complex and demanding task. There has been much research into what factors are important in such implementations, but seemingly very little about the links between critical success factors and management control systems. This thesis attempts, through a case study, to answer the question of how management control systems affect the implementation of an MRP system in ASSA AB, a Swedish manufacturing firm. Data is primarily collected through interviews. Theory regarding implementation success definitions, critical success factors as well as management control systems is presented.

The aim of this masters thesis is to, from a queertheoretical point of view, examine the possibilities to classify the subject homosexuality in three different classification systems. The three systems that have been analysed is the Swedish classification system SAB, the Universal Decimal Classification UDC and Dewey Decimal Classification DDC. The analysed editions are updates from the beginning of the 1970´s until today. The emphasis has been on how well the systems correspond to the changing society. We found several differences between the three systems, but also some resemblances.

Companies today need to be more focused than ever on having an active Human Resource Management culture. This is not only because of the companies? concern for their staffs wellbeing, but for the companies? effectiveness in the long run. The reward systems which many corporations use today, to both keep their employees and attract new ones, is a well researched subject by scholars as well as journalists. Earlier research has suggested that it is important to implement an active Human Resource Strategy.

This master thesis covers the development of an automatic tuning process for the existing speed controller for drive systems. The drive systems are resonant two-mass systems where a motor is used to drive a load connected by a shaft. The developed method relies heavily on system identification and the construction of a complete mechanical model of the process. With this approach, the common problem with poor load speed control that derives from measuring only the motor speed can be addressed and solved for a majority of such processes.The automatic tuning method has along with general test functions been implemented in a complete tool for automatic tuning, testing and performance evaluation and reporting for drive systems..

This thesis deals with subject-based hierarchical search-services on the World Wide Web. The purpose is to investigate how systems of this kind facilitate information retrieval through subject-based information seeking. Its starting point is taken from the study of texts and qualitative analyses of search-services on the World Wide Web. Important aspects and features of the Internet and the World Wide Web are explained as well. Three systems are examined: Mölndals Stadsbiblioteks Länkkatalog, Svesök, and Alta Vista.

Have you ever had problems sorting your cables, are the winders you use too big and crude then the EC-winder is the product for you. The EC-winder concept is a compact and intelligent winder for home application. Its simple design and subtle looks enables it to blend in with the surrounding environment. Its function is designed so that it with ease can be handled by any one after only a couple of instructions. You simply thread the cable trough the opening on the winder and then you rotate the upper part until the cable reaches the desired length. After use the winder can be opened to enable easy extraction of the cable..

Building Automation Systems in commercial buildings are often designed and installed by different contractors, using equipment and components from different manufacturers. The lack of an accepted communication standard has resulted in a few different standards. Many manufacturers of building automation systems only support one, a few or none of these standards, while developing proprietary system solutions. Regin, who develop such equipment, are planning to adopt an open communication protocol specially designed for building automation - BACnet. As a step in that direction this thesis was announced with the purpose to investigate the possibility to implement BACnet in one of their products and to gain more knowledge of the BACnet protocol.

Information handling has been a key issue for different companies for a long time. Electronic Data Interchange (EDI) is used to transfer different business documents from one company to another. This is done in such way that the information itself is separated from how this information is stored and handled in the companies internal systems. As different companies have different systems there is a need for a standardised format for this exchange. There is a big difference between EDI-systems based on what kind of EDI-standard is used.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

This thesis consider alternatives for heating and cooling planned office buildings at Arlanda airport. The thesis is divided into three parts where the third part is a shorter synthesis of the two first. In the first part the energy demands of the buildings are modelled in a computer program. Two different building models are created, one more conventional and one with good energy properties. The results shows that with proper construction and ventilation systems etc.

Artikelns fokus ligger på smarta elnät och specifikt den distribuerade kontrollen av dem. Syftet med projektet var skapa hårdvaran och mjukvaran till ett distribuerat informations- och kontrollsystem för att kunna styra lasterna till en liten elnätsmodell, ICS byn (Industrial Information and Control Systems). Speciellt så skulle det undersökas om det var möjligt att skapa ett fungerande kontrollsystem med billiga kommersiella produkter, Raspberry Pi:s och Arduinos. Projektets resultat kommer sedan att användas för ett fortsatt utvecklingsarbete på ICS.För att skapa det distribuerade kontrollsystemet så användes JACK Intelligent Agents, en utvecklings miljö för multiagent system baserat åa Java. Rapporten tar upp de olika hårdvarukomponenterna Arduino, en mikrokontroller och Raspberry Pi, en linuxbaserad dator och transistorkretsarna som har byggts för att kunna driva de elektromekaniska brytarna i byn från Arduinon.