This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The swedish law against female genital mutilation (FGM) prohibits procedures that removes parts of the female genitalia and thereby makes permanent changes in the body. The problem with the wording of the law is that it may also apply to the western phenomenon cosmetic genital surgery. This paper therefore examines if cosmetic genital surgery should be covered by the swedish law against FGM, by making a critical comparing analysis. The paper begins with comparing FGM with cosmetic genital surgery to prove that there are more similarities than differences between the procedures. By using the theoretical perspectives universalism and postcolonialism, the paper then examines why, particularly in the West, there is a different approach to FGM than to cosmetic genital surgery, regardless of the similarities of the procedures.

This paper seeks to discern the political factors that determine the results of negotiations in international cooperation. On the one hand, it makes a contribution to the broader theoretical debate on international regimes by combining regime theory and theories on globalisation into an integrated framework for the analysis of international policy results, or in this case treaties (theoretical objective). More generally, globalisation theory will help us understand why it has become important to initiate international cooperation, and regime theory to elucidate how these international cooperations emerge. To many observers, it is the large transnational corporations of the rich North, which have done best out of free trade. Through the huge influence they wield over governments at the WTO (World Trade Organisation), these corporations have won the freedom to move around the globe without restriction, making use of cheap labour, and locating wherever they can best tap into the largest and most lucrative markets.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2014:05.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Aggression between laboratory mice is a common problem and can result in welfare issues such as mice hurting or killing each other and also stress. Swedish laws and regulations clearly states that mice must be housed with a companion due to their natural social structure. Many studies have investigated the effect off enrichment, group size, cage size and other potential changes in in their environment on the occurrence of aggression. Even with these changes aggression can exist and therefore a new solution was tested in this paper. The proposed solution was to house an intact mouse with a castrated one and thus fulfill laws and regulations while still maintaining the physiology of one of the mice for the purpose of medical experiments.

During the summer of 2005 a number of steer producers in Skåne, Sweden, found that their animals graded less favourable according to the EUROP carcass grading system when slaughtered, than ordinary. The aim with this project was to determine factors that affects the production result in steer production and to find the reason to the lower classification. The project was initiated by Anita Persson, LRF, Skåne and was preformed with supervision from Ingemar Olsson, SLU, and Jens Fjelkner, Skånesemin. Ten producers of dairy steers located in Skåne was chosen for this study. The producers were interviewed to collect information about their steer production with respect to their planning and results.

There is an uncertainty in the market for grain forcing the meat/milk producers to review alternative feeds to a larger extent, in order to get control over the feed costs. This has led to that the meat/milk producers need to have a good knowledge regarding how the different feeds influences the animals and which technical equipment to use for handling. For those that produce their own feedmix, there is a need to put interest in new crops and their characteristics to be able to get the knowledge of what is required for their own production. It is beneficial to keep an open dialogue with advisors to be updated in new crops and new technology for feeding. When mixing feed at farm level, the legislation is not very clear since it the target group is large scale mixing plants. We have brought up the most important rules and regulations from the EU parliament Council as well as the ones from the Swedish Board of Agriculture (SJV), regarding feed mixing on farm and factory level. We have studied beans and pea at two different moisture levels, in order to evaluate how the moisture level affects the distribution of particles when milling with a plaitmill and a hammermill.

This paper is about the new programming language from Microsoft, C# (See Sharp) and the .NET Framework. They are still in beta-version, but will be released on the market in February 2002. This paper presents C#, not in detail but the characteristics that distinguish the language. A comparison is done with C++ and Java, since C# is most resembling to these languages. Both C# and Java have been developed from the mother- language C++.

This thesis means to find out how preschool teachers are working to demonstrate the importance of recycling and reuse for children. My hope is to contribute knowledge about various practical methods to establish the idea of sustainable development in the operation. I have used the method of qualitative research and done semi-structured interviews with preschool teachers on certified green flag preschools. The questions I have asked for example concerned how the preschool teachers have worked with recycling and reuse, how much the children have been able to influence and if other didactic subjects are implicated. Six interviews were made and these are summarized in the result part.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This paper examines, through questionnaire, how young students in upper secondary school in Malmo experience social integration. It also contain what they think should be done in order to improve the integration between youth that are ethnic Swedish and youth that have a foreign background. To understand the subject we started with a review over Swedish integration politic and its influence over Malmo and social integration in the country. We have used such theoretical starting points as identity and ethnicity in relations to the social surroundings, social affinity theory and flexible mindedness, making of groups among youth and factors to promote social integration. Our conclusion is that the experience of social integration between the two groups depends on how you experience yourself.

In this paper an upper level compulsory school is examined from a gender perspective. The purpose of the paper is to analyse how girls and boys acquire space in the classroom (during a Swedish lesson) and in the sports hall (during a lesson in physical education). To fullfil the purpose of this paper a seventh grade class was observed during a lesson in Swedish as well as in sports. In addition to this on pupil was interviewed. In this paper the results are compared to and measured against results from earlier research in the field. Used as a theoretical basis are Simone de Beauvoir?s theories on gender.The results attained indicate that girls and boys claims space in different ways during time in the classroom as well as in the sports hall.

AbstractThis is the paper you should read if you want to know more about working in team. Teamwork is a way of working and it increases more and more among societies and companies today, but it is not quite clear what the diffrences is from working in groups. We have in this paper tried to clear out the differences between groups and team, and we have also tried to give an oversight of how to work in team in organizations. Cultures of organizations, leadership and power and also development of qualifications are big parts of an organization´s daily work, and we have explained these concepts from a teamperspective.We have, in this paper, done interviews with people that have been in contact with the central consepts that we use. And then we have analyzed their answers with help from litterature, which we have closely studied, thereafter we have presented our results.

Recently I discovered that preschool education has evolved from integration of various subject contents and working methods. The purpose of my study is to investigate preschool teachers' attitudes and ways of working with a theme-oriented approach. I also want to examine their opinions regarding the integration of subject content in terms of mathematics and science subjects (NO) in preschools theme-oriented work approach.My questions for this study are:What is a preschool teacher's attitude and their ways of working to a thematic-oriented approach?What is a preschool teacher's opinions regarding the integration of subject content, especially in mathematics and science subjects (NO) in their pre-schools theme-oriented work approach?I have used myself a qualitative method of investigation to produce materials for my research project. I collected my empirical material for my study from the semi-structured interviews that was done with four preschool teachers in two preschools in Botkyrka municipality.