As requested by the company Husqvarna AB, we have developed a prototype of an electrical start device to a chainsaw. This was done through the development of new details in Catia, which has been integrated with existing details. Electrical components have been purchased by HAB electronics. In parallel with the modeling calculations was done, which was the basis for determine dimensions and the choice of an electric motor and gears. Prototype 1 improved gradually and led to prototype number 2, which became the final result.

During 2006 SNVDB (the national road data base for forestry) is being introduced to Holmen Skog. This data base contains all information about Holmen Skogs road systems. The information will then be used in different kinds of optimisation models which only produce correct and reliable results if the input data are of the adequate quality. Today there are reasons to believe that road data is of various qualities. The forest roads are often in a bad condition and have to be improved before a planned harvest. The cost of maintenance and construction of new roads is a large part of the total harvesting cost.

The aim of this thesis is to investigate the possibilities for creating a national interlibraryloan system in Sweden and to see how it could be integrated into an international network .The methods used are both qualitative and quantitative. We have sent inquiries to a numberof libraries and we have interviewed keypersons in the interlibrary loan field in Sweden.We have reached the conclusion that in spite of several impediments there is a lot that speaksfor a Swedish national interlibrary loan system in the near future. A national bibliographicdatabase is already evolving..

Today?s society is one where technological advances are made daily, which increases the need to stop and assess the risks against users? integrity when integrating new technology in contemporary systems all the greater. We have taken two technologies, Near Field Communication and Certified Wireless USB, whose envisioned area of use is to be integrated into mobile phones, and evaluated what security threats are revealed for the respective technologies. The threats against security have been identified through research of the standards and existing reports for each technology. Practical experiments have not been conducted on account of us not having access to any equipment to run such trials.

För att få bedriva underhållsverksamhet på flygplan över 5700kg så måste underhållsorganisationen i fråga vara godkänd av Transportstyrelsen samt följa EU:s flygsäkerhetsmyndighet EASAs Part 145 regelverk. För att berörda myndigheter ska få sig en insikt i hur underhållsorganisationera ser ut och fungerar så måste dessa skriva en verkstadshandbok som beskriver verksamheten och processer. Detta är ett krav som finns beskrivet i Part 145 regelverket. Uppgiften blev att skriva ett förslag på kapitel 2 till PAMs vekstadshandbok från grunden genom att intervjua personal på plats för att få reda på hur respektive tillämande procedurer såg ut. Syftet var att skapa en verkstadshadbok som var aktuell och som personalen kunde använda som handbok att slå upp i och hitta respektive procedurer..

This basic data of knowledge for a future maintenance programme concerning the park at Kungsholmen is made up of 3 separate parts. 1.) A historical documentation 2.) A mapping and documentation of the objects status of today. 3.) An analytical evaluation complemented by a maintenanceproposal for the historic park. The aim of the document is to serve as a future basic data for decision making, based on the aim to preserve and develop the described cultural values of the object. The different parts can be used separate or altogether in order to define or redefine new goals..

Flera kommunala förvaltningar och andra instanser efterfrågar idag former för hur brukare aktivt kan involveras i skötsel av tätortsnära skog- och naturmarker. Erfarenheter finns, men delgivning av goda exempel och bra referenser är en bristvara. Genom detta examensarbete presenteras en form för hur skötsel av en tätortsnära skogs- och naturmiljö praktiskt kan genomföras tillsammans med de boende i närområdet. Förslaget för samarbetet har utformats via en fallstudie och baseras på intervjuer med boende och förvaltare inom ett avgränsat villaområde i Huskvarna. Studien redogör även för synpunkter och de krav som lyftes fram av respektive part inför samverkanssituationen, dvs. samverkanspotentialen och själva ramen för samverkan.

This study examines regional integration in Africa with a focus on the Common Market for Eastern and Southern Africa, COMESA. COMESA, with roots that go back to the beginning of the 1980?s, is one of the largest and most diverse areas for regional integration in Africa and has currently 19 member countries. The goal of the COMESA co-operation is to become a fully integrated area by the year 2025 that will merge into the African Union (AU). AU will then, in turn, create a fully integrated African continent in a not too far away future.

By using the cyborg as a structural tool to analyze certain aspects of human interaction with what can be perceived as landscape or landscape architectural elements, this thesis seeks to explore the concept of the cyborg landscape in order to place human practice in the context of postmodern ideas of the end of true nature. Ever since human kind has externalized evo-lution by using tools and extending the body with technological inventions, we have also taken our surroundings out of their natural trajectory. Everything we do that is conditioned by the use of technology is altering that which we perceive as nature and natural. Since we have been doing this for millennia we have of course also altered our surroundings by the influence of technology.This thesis uses three examples of landscape or landscape architectural elements that are conditioned by the integration of technology to explore this practice through a postmodern model of analysis based on the concept and basic premises of the cyborg, or the cybernetic organism. A cybernetic organism is in short an organism that has functioning technological parts integrated into its system.

The purpose of this thesis work is to create a prototype for an augmented reality application that isaimed to support service technician when performing service and maintenance of machines andengines. The prototype will be used for investigating what technical limitations there is and toestablish basic usability for the user interface. The method that is used is user studies and analysis toevaluate use cases and user stories. An iterative work process is then applied for design and theprototype is continuously user tested.The resulting prototype uses a Samsung Galaxy Tab 2 running on Android operating system. Theframework used for augmented reality is NyARToolkit which handles marker recognition andconnections to Android.

AbstractTitelEffektmätning av ett utbildningsprogram ? genom lärande utvärderingEngelsk titelEffect Measurement of a Training Program ? through Learning by EvaluatingHandledareLars HolmstrandExaminatorMagnus SöderströmDatumJuni 2011Antal sidor77Nyckelordutvärdering, lärande, effektmätning, lärande utvärdering, formativ utvärderingKeywordsevaluation, learning, effect measurement, learning by evaluating, formative evaluationThe aim of this study was to investigate which effects a competence development effort has had on individuals and group, as well as in which way formative elements of evaluation possibly could have contributed to learning. The target group of the study was employees (eleven), their managers (seven) as well as co-ordinators (two) of a maintenance department at a nuclear power plant. The training program lasted from December 2009 to May 2010. The study was in progress as of September 2009 when a decision was made at the maintenance department?s training board to carry out the evaluation.

Bakgrund: Synen på kvalitetsutveckling har förändrats genom åren. Förr arbetade hantverkaren i en naturlig närhet till sin kund och kunde lätt anpassa varje produkt till de särskilda behov och önskemål som denne hade. Denna närhet försvann dock i och med att man byggde upp en storskalig industriell masstillverkning, där organisationen präglades av kontrolltänkande, specialisering och anonymitet. Utvecklingen har gått vidare och idag bygger de kvalitetsorienterade organisationerna på engagemang och motivation från personal, kunder och leverantörer. Tillsammans samverkar de för ständig förbättring av verksamhetens alla delar, vilket leder till resultatet att man får nöjdare kunder, medarbetare och partners samt ökad effektivitet.

These days most companies conduct some form of work for the external environment, quality and safety. In connection with this work, some companies have chosen to get management systems certified by any applicable standard for one or more of the fields while other companies have chosen other ways that are not associated with certification.In light of the fact that the individual systems are becoming unmanageable an increasing number of these companies are faced with the decision whether to integrate and coordinate these different systems or not. In order to study the possibilities of a company?s system coordination an assessment of elements particularly interesting for the company was performed. The key elements and focuses in the evaluation were staff access to information, experiences from other companies and environmental work status for some of the organization's companies.

AbstractPurpose ? The purpose of this study is to examine the challenges that exist within thematerial handling process, to and from a department for service and maintenance at a hospital, and how the challenges can be managed to achieve a more efficient material handling process. In order to fulfill the purpose the following two questions where formulated:1. What challenges exist within the material handling process, to and from adepartment for service and maintenance at a hospital?2.

VSEM project and the need for a more efficient way of handling requirements andinformation are highly apparent.The overall objective of this thesis is divided into two parts:1. To identify criteria/factors leading to a successful introduction of an informationmanagement system.2. To develop an implementation process for a requirement management system ?the first step towards a PLM system in EE development at VCC.This will be done through interviews with employees, a literature review and an analysisof studies of three earlier projects within VCC.The conclusion of this study shows the great need for change in work methods fordesigners handling information and requirements. An implementation process has beenidentified with guidelines on how to handle different phases of the process.