The purpose of this study was to investigate how Islam and Muslims are portrayed a) in results from studies on Swedish teaching materials, and b) in articles in Swedish media newspapers. The study was conducted through two separate studies. In the first study, five previous research reports on how Islam and Muslims are portrayed in Swedish teaching materials were analysed in order to discern the main results regarding the portrayal of Islam and Muslims. In the second study, newspaper articles from 11 Swedish newspapers were analysed in order to discern which central themes emerge in the description of Muslims and Islam in said newspaper articles, as well as which properties and features are attributed to Muslims and Islam in the articles studied. In both studies, the data was analysed inductively through a qualitative content analysis.

This report presents a bachelor thesis by Erika Gustrén aimed to increase people?s interest for recycling and reusing by create new products of things that already exist in most people?s homes in the materials textile, plastic and paper. That would be a modern and innovative way to contribute to a better environment.The goal with this project was to create three cocktail dresses made of the same pattern and design and with the three chosen materials. The project did not have its base at a company, therefore an external mentor was chosen to help and support during the development of the project. My mentor was Kerstin Boulogner who is a fashion designer and one of the members of GKF (Gotländska Konsthantverkare och Formgivare) in Visby.The project began with an analysis of the chosen materials; textile, plastic and paper.

The resting area is the most important place in the barn for the dairy cow, sometimes called the heart of the free stall system. Inadequate design of the lying area, and lack of or poor quality of bedding materials may reduce the hygiene of the stall. Poor management regarding the cleanliness of the resting area may lead to poor animal hygiene and increased bacterial growth. This in turn will lead to increased risk for environmental mastitis as well as impairing milk quality through contamination with spores. In this literature study the most commonly used bedding materials; straw, sawdust, wood shavings, clean sand, recycled sand, peat and recycled manure solids, are compared to one another with regards to their ability to resist bacterial growth. Effects of adding hydrated lime to bedding materials have also been studied. Most bacteria need humidity and prefer a quite high water activity to be able to grow.

This is a study about how different digital instruments can be used in education for pupils with autism and intellectual disability. The questions formulated to research this chosen area was: ?What does teachers think about digital instruments and interactive teaching materials when it comes to benefits and disadvantages in the classroom?, ?In what ways is digital instruments used as teaching materials in the specific school context? and ?From a perspective of teaching and learning, what kind of problems and opportunities can be gained from using digital instruments and teaching materials?. To gather this information interviews was done with three specialist pedagogues working with the chosen group of pupils at three different schools. The material shows that the specialist pedagogues have positive attitudes towards working with digital instruments in this specific group of students..

This is a study about how different digital instruments can be used in education for pupils with autism and intellectual disability. The questions formulated to research this chosen area was: ?What does teachers think about digital instruments and interactive teaching materials when it comes to benefits and disadvantages in the classroom?, ?In what ways is digital instruments used as teaching materials in the specific school context? and ?From a perspective of teaching and learning, what kind of problems and opportunities can be gained from using digital instruments and teaching materials?. To gather this information interviews was done with three specialist pedagogues working with the chosen group of pupils at three different schools. The material shows that the specialist pedagogues have positive attitudes towards working with digital instruments in this specific group of students..

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

The Swedish government has introduced a goal to reduce the energy intensity by 20% to the year 2020. To reach this goal actions need to be taken throughout the energy sector which includes residential and commercial buildings. This thesis considers the possibility to reduce the energy usage in a building located close to Uppsala. The analyzed building is a combined office, cafeteria and entrance and was completed about half a year before this project started. Therefore the measures presented for a more energy efficient building are presented as measures for future constructions.Simulations have been made in VIP-Energy, a dynamic energy calculation program.

Background: The most energy efficient houses today are so called passive houses. These houses achieve high energy-efficiency partly by having well insulated walls. U-value describes the amount of heat transfered through a building element, the more insulation, the smaller U-value. A typical passive house wall have a U-value of 0.10 W/m2,°C. The passive houses are primarily made as small family houses and not as a block of apartments.

When constructing an industrial- or hall building, the most common framework materials thatis used are wood, steel or concrete. Due to an assignment from Byggnadstekniska Byrån ABhas a document been created that makes it possible to investigate how the final costs is af-fected by gapes in between elements and which used foundation. And this with steel as thematerial. The purpose with this essay is to investigate which is the most well fitted materialwhen constructing an industrial- or hall building wood, steel or concrete. Information aboutthe different materials has been collected by litterateurs and by different internet pages.

When constructing a road the risk of emission of substances from the used materials to the surrounding environment has to be evaluated. The aim of this study is to present a proposal for how to evaluate the risk of contamination as a result of emission from the materials in a road construction. The study is based on literature studies, an inventory and a questionnaire that examines how experts in governmental agencies, industries and universities evaluate the risk of contamination. The inventory indicates that guidelines for evaluating the risk of emission from secondary materials in a road construction do not exist. The conclusions from the questionnaire are: that there is no common way to evaluate the risk of contamination as a result of emission from materials in the road construction, there is no uniform interpretation of the terms "minor" and "significant" risk of contamination and that the evaluation is subjective.

As break downs of production transformers are costly and often result in long outages it is essential for reliability of operation that the transformers are manufactured to be robust. The aim of this M.Sc. thesis is to investigate if deviations should be made from the standard IEC 60076 ? Power Transformers in order to describe a robust large power transformer for procurement.The investigation has been conducted in three stages. In the first stage a definition of the term robust was developed in consultation with the client Vattenfall Vattenkraft.

This report deals with issues related to construction waste. Building material that has not been built into the project is defined as construction waste. Cost of construction waste amounts to 4-12 % of the total cost of the project. Moreover, cost of construction waste is 1-3 % of the production cost. The aim of this study is to increase knowledge about the main causes of waste within the construction industry.

The thesis aims to compare differentpiping materials in heating systems interms of cost as well as to illustratethe impact of energy characteristics ofdifferent materials over its servicelife. The methods used for costcalculations regarding piping are alsoto be examined to highlight thedifferences between template basedcalculations and more carefully executedones. The work is delimited to discusspipes of steel, copper, plastics andcomposites. The aim is that the resultcan be compiled to illustrate the prosand cons of various materials whenevaluating investments.The main object of the survey is part ofa heating system in the office-block KVSommaren located in southern Stockholm.The configured piping system is designedwith the mentioned piping materials andis used to make up the data for flow andcost calculations. The differentmaterials are calculated in both aconventional manner with a supplementarycost for additional fittings and with amore accurate quantification of thecomponents.

The aim of this work is to develop new conceptual designs for the fairings that are situated between the fin and the rear fuselage on the new version of the JAS 39 Gripen aircraft, called the Gripen E/F. The designs presented should show a profit in the form of lower weight. To achieve weight loss, the possibilities of using other construction materials other than those which are available at Saab today were studied. Therefore, a material survey was carried out in which the market for modern construction materials was studied to get an idea of today?s level of technology.