A high quality is highly requested in today?s thinnings, since these are the base for continued value development of the forests. Thinning quality often means a minimization of damages on soil, stems and roots during the cutting. One way to reach a high quality is to set up goals that will be followed up after the cutting is made. Self-checking gives information of the machine drivers work and guarantees the customers a good quality of work.

This thesis deal with tick burden on roe deer (Capreolus capreolus) fawns, in relation to age, weight, hind foot length, and as well as to vegetation and habitat on bed sites. Roe deer fawns (N = 25) were captured from May 27 to June 27. Samples of ticks were collected and tick burden were estimated. Of all sampled ticks the nymphs and adults were Ixodes ricinus, while the larvae were not identified. 4.4 % of the sampled ticks were larvae, 55.0 % nymphs, 26.8 % adult females, and 13.8 % adult males.

The private sewage systems in Sweden releases around 600 tons of phosphorus per year, compared to about 350 tons from municipal sewage treatment plants, and they account for approximately 21% of the total anthropogenic discharge of phosphorus into Swedish waters. About 40% of Sweden's nearly 1 million private sewage systems are inferior with respect to emissions to surface and groundwater. The technology of small sewage plants is under development and knowledge of treatment effects for different solutions is poorly consolidated. Municipal authorities lack resources to keep up with the technologic development and assess the reliability of the treatment performances that suppliers report for their products. The thesis aims to conduct a market review and evaluation of wholly or partially prefabricated small sewage plants, to make it easier for municipalities and property owners to assess different technical solutions. The goal is a compilation of the products on the market, evaluated on the basis of the reliability of specified degrees of reduction.Information on sampling procedures and test results were collected through a questionnaire to all active suppliers and the responses were then used to classify the products.

In this paper we have chosen to focus on social workers and their experiences of interacting with clients with neuropsychiatric disabilities, in example persons with ADHD (Attention-Deficit/Hyperactivity Disorder), Asperger syndrome, autism and/or Tourette syndrome. The main purpose was to look into three areas: What knowledge do social workers mean that they need about neuropsychiatric disabilities and how can their needs of knowledge can be met? How do they experience the meeting with a person with neuropsychiatric disabilities? How does the cooperation function between authorities regarding persons with neuropsychiatric disabilities?Definition of the concept of disability and function from a historical perspective points out that the approach has changed over time. Previous research studies of the interaction in meeting between the client and the social worker shows that the social worker carries two faces, so called aspects. The first aspect is about help and care and the second aspect is about administrative functions.

This master thesis was a continuation of a previous study in the diesel exhaust characterization, which is part of the academical work embedded in the EMIR-1 project. The main objective of this thesis work was to finish the installation and make the proper modifications of the particulate mass measuring system located in one of the engine test cells at KTH, in order to be able to measure the mass of the particles from the exhaust of diesel engines.This experiment requires a diluted flow sample from the exhaust that should be sent to the device that makes possible the measurement of particle mass, called TEOM. In the first stage of this project, the objective was to study and make the proper modifications in the existing KTH diluter because there were several problems to obtain a constant dilution ratio from it during tests.This modifications were made and it resulted in a great improvement in the maximum inlet and outlet flow that this diluter can handle. Therefore another modification is proposed for controlling the inlet exhaust flow so it will be possible to regulate the dilution ratio and make it constant along a wide range of engine loads and speeds.The second and most important stage was to make particulate mass measurements possible by analyzing the frequency signal from the TEOM device. The idea was to obtain the frequency of oscillation from the tapered element in the TEOM, and therefore with the proper correlations, be able to predict the particulate mass concentration in the exhaust flow from the engine.An electrical problem in the TEOM circuit was detected and corrected, so the signal that carries the frequency from the TEOM can be analyzed properly.

Ammerån which is a small forest river in eastern Jämtland is a well-known river that has been a popular fishing river for a long time. The actual Ammerån begins downstream the lake Solbergsvattnet at Hammerdal and flows into the Indalsälven 10 km upstream Hammarstrand. The river environment switches between forests with wilderness feeling and open agricultural land. The entire Ammerån is today a nature reserve and protected from hydropower development. Fishing in Ammerån has mainly been focused on trout and grayling, and is so even today.

The red-tailed monkey (Cercopithecus ascanius) is a small, alert and active animal inhabiting forests with dense vegetation and as such hard to observe in its natural habitat. The principal aim of this study was to scrutinize whether the methods, previously used in a behavioural study of the blue monkey (Cercopithecus mitis) can be applied in studies of the red-tailed monkey?s behaviour as well. Additionally, habitat preference and foraging behaviour of the red-tailed monkey were examined. The study was carried out between the 16th and the 22nd of March 2009 in the Sabaringo forest, located on the western border of the Masai Mara National Reserve.

This thesis is made on behalf of SCA's Forestry Division and is a comparison of two bucking simulation tools: Aptan (manufactured by Skogforsk) and Best/upr (from Berget Systemdesign). The data is based on 32 stands from SCA's forests in Norrbotten and Västerbotten. The objective is to compare the simulations created by the tools with the harvested volumes from those stands. Three variables are needed for the bucking simulation; these are the diameter distribution (at breast height), the relationship function between diameter and height, and the taper coefficients. The volumes of five different assortments from the stands are compared.

Lake Bornsjön is situated 30 km southwest of Stockholm in a rift valley lake and consist three basins outstretched in northwest-southeast direction. The surface area is 6,7 km2 with a maximum depth of 18,3 meters, a mean depth of 9,8 meters and a retention time of the water of 6,5 years. The drainage area is 42 km2 and consists mainly of arable land (ca 1000 ha) and productive forestry land (2500 ha), but in the drainage area there are also restored and fairly newly constructed wetlands.Today the Stockholm area receives its drinking water from Lake Mälaren, but if there would be any pollution of this source, Lake Bornsjön would act as the water source. The area surrounding the lake was bought already in 1899 by Stockholm Stad for protection of the lake and was taken over 1993 by Stockholm Vatten AB. It has been a water protection area from 1988 and it was also accepted as a nature reserve in 1995.

Föroreningar av metaller är ett problem längs med kusterna, vilket har en negativ inverkan på vattenlevande organismer och miljön. Orsaken till detta beror till stor del på pågående utsläpp från tätorter, hamnar, industrier och på ?gamla synder (då det inte fanns några detaljerade miljölagar som reglerade spridningen av föroreningar från exempelvis industriprocesser)?. Utsläpp av föroreningar behöver inte bara komma lokalt utan kan också transporteras via avrinningsområdena och via atmosfäriskt nedfall. Idag arbetar länsstyrelsen med att invertera och sanera förorenade områden, men för att kunna ta reda på hur det ligger till med kusterna och hamnarna är sedimentprovtagningar ett måste.

Methane (CH4) is a greenhouse gas (GHG) that contributes to the global warming. One of the largest sources of methane is livestock, preferably ruminants which alone counted for 30% of the total agricultural anthropogenic methane emissions in the year of 2000. The reason to why ruminants are such large contributors of methane are that the gas is produced in the rumen by enteric formation and leaves the animals by belching, exhaling or by the excreta.Diets high in concentrates can result in a lower emission of methane. Also diets with a high content of starch, such as alfalfa-grass, have a methane-decreasing. It is profitable to reduce enteric methane formation since that form of methane is unavoidably lost.

The study of the French market for softwood has been done in collaboration with VIDA AB. The aim of the study was to investigate important product quality and service quality dimensions, the customers? perception of the offering and generally describe the French market and present actors. The market for softwood around the world changes over time and new markets can mean opportunities for the sawmilling industry. The French market is the second biggest European market for softwood, has had presence of actors with sourcing of raw material from the Nordic countries for decades and there is a growing interest for building with wood. Theory being used is about the different dimensions that make up the total quality of softwood, together with intangible dimensions making up the total offering that helps the sawmilling industry to create positive perceived value for the customers. Methodological approach in the study was a case study research design, aimed at providing knowledge about one specific subject in one context. The general description was mostly carried out by literature studies and data from various statistics sources.

This thesis is an evaluation of a new design concept for statorfeets in Gallejaur hydro power plant. Founder of the work is Vattenfall AB Vattenkraft. During the 70- and 80´s nuclear power began to be phased in to the Swedish grid, which meant that hydropower became an important source of rules. The generators began running in so called intermittent operations instead of basic operations, which meant 300-600 start/stop per year instead of one-ten numbers start/stop per year. In order to deal with the thermal forces that arise at every start and stop suppliers began to mount so called sliding joints, which is to take advantage of these forces and maintain the stator shape.

Bakgrund: En av sjuksko?terskans grundla?ggande uppgifter a?r att lindra patientens lidande i samband med va?rd. Lugn musik har visat sig vara ett effektivt verktyg fo?r att minska patienters upplevelser av stress och sma?rta vid flera procedurer inom sjukva?rden. Parametrar som hja?rtfrekvens och blodtryck kan pa?verkas av musiken.

A today common soil reinforcement method is the installation of lime-cement columns. Lime-cement columns have been used since the 1970?s and have been a useful method for stabilizing soil at great depths. It is mostly used for stabilizing road and railway embankments because the method is economically viable and the columns are easy to install. The total costs for the installation of the lime-cement columns is dependent on the numbers of installed columns, what percentage of lime and cement that has been used and the pattern in which the columns has been installed.