This degree project has been carried out by Oscar Adolfsson and Marcus Blomqvist, during the spring of 2010, both studying to become Bachelor of Science in Innovation and Design Engineering, at Karlstad University. The degree project includes 22,5 credits.The work is done on behalf of Etac Supply Center AB in Anderstorp. Etac is a company developing and manufacturing home health care products, with operation in Sweden, Norway, Denmark, England and Germany, and with sales worldwide. Bo Lindqvist, R & D manager has been the contact person at Etac.During the project the students has had a workplace at Semcon Caran AB in Karlstad. Semcon has also been helpful as a sounding board.The objective of the work has been developing a new, wall mounted shower chair, assigned for persons with difficulty to stand up while showering.Etacs requirement of the shower chair is that it should be able to support a user with a weight of 100 kg, the chair shouldn?t have any outrigger, optional should be armrests and backrest.

Today there is no way of measuring or simulating turbulent flow in high Reynolds numberenvironments. The computational power required to simulate these conditions is not expectedto be available for several decades so instead the CICLoPE project aims at solving thisshortage by the construction of a long carbon fiber wind tunnel in which real measurementscan be made. To do accurate measurements it is of importance that the wind tunnel, 0.9 metersin diameter and 110 meters long, is as straight as possible.This master thesis treat the design and construction of a device which may be used to align thetunnel along a reference laser beam. A design is presented which allows the pipe to be alignedwithin about a quarter of a millimeter along its entire length. Contents span over severalscience fields such as physics, mechanics, control theory and electronics.The result is a theoretically correct design.

Detta examensarbete behandlar utformning av inredning i Bombardier Transportations tågmodell Regina. Arbetet omfattar en teknisk rapport med översikt av arbetsgången genom det utförda arbetet och de olika tillämpade tekniker som använts för att nå fram till slutgiltigt resultat. Arbetet omfattar även byggnation av en fullskalemodell vilken finns att beskåda på Mälardalens högskola i Eskilstuna..

This is a thesis for a Bachelor Degree Project, performed in the subject MechanicalEngineering. The students Roger Malmberg and Simon Hagberg have carried out adesign project on behalf of the recently established company J&D Assisting systems,located in Halmstad.The project consisted in developing J&D's first prototype of a power assisting solutionfor wheelchairs. A power assisted wheelchair combines human power, which is deliveredby the arms through the pushrims, with electrical motors, which are powered by a battery.The power assisted wheelchair is aimed at customers, who have used a regularwheelchair for a long time, but who have become weaker or just need additional powerwhen driving uphill. This kind of wheelchair will provide additional power for users,which will spare their wrists, elbow and shoulders. The product is torque sensor free andinstead it relies on the velocity.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

AbstractIn this thesis we aim to extend the current theories about a concept called persona. A persona is a model of a user, mostly based on qualitative research and made with such accuracy that it to some extent can be used as a replacement of a real user in a development process and as a communicative tool. We will present a way of constructing this persona without meeting the actual users and follow up with interviews from the organization using them. This will lead to a model over the process of introducing personas as a concept in an organization,previously not familiar with the concept. The model is adapted to also work for projects and organizations where the concept is already known..

Uppsatsens innehåll undersöker och diskuterar frågeställningen: ?Hur kan man gå till väga för att tillämpa principerna från Universal Design i front end-utvecklingen??. Universal Design är en uppsättning av principer man ska följa i tillverkningen av en fysisk miljö för att uppnå ett användarvänligt resultat. Med hjälp av dessa principer tillsammans med WAI?s riktlinjer har jag gestaltat ett front end-ramverk för att få svar på min frågeställning..

It is always more demanding and the risk for misunderstanding increases when communicating in noisy environments. The confusions and the mistakes that occur when speech is disturbed are very interesting and happens constantly. The purpose of this study was to examine speech recognition results from the test PB S/N +4 and find out which confusions that are made by the normal hearing and by the hearing impaired persons in the speech lists 3 and 4, and also analyse the mistakes from a phonetic perspective. Ten normal hearing and 50 persons with impaired hearing participated in the study. The people with impaired hearing were divided into two groups; DTMV 40 dB HL.The results were compared between the normal hearing and those with impaired hearing.

Between 1965 and 1975 a major housing project was carried out in Sweden to resolve a major housing crisis, the so-called one million housing program (Swedish: miljonprogrammet). To raise the standards and create a more attractive housing in these areas is currently a very relevant topic in Sweden.Evidence-based design is the process of basing decisions of the built environment on credible research and studies to achieve the best possible outcome. This method is primarily used in the healthcare sector to improve quality of care and reduce costs by creating healthy environments.The possibility of refurbish apartment buildings from miljonprogrammet using evidence-based design has been studied by means of an extensive literature review and a closer examination of the residential area, Husby in Stockholm, which has been chosen to represent the miljonprogrammet in its entirety. Furthermore, the evidence-based research has been limited to seven fields; nature, noise, color, wayfinding, safe environment, daylight and thermal comfort which has been assessed to be applicable on housing. In order to obtain a comprehensive overview of the different fields, four different subjects were chosen to investigate further within each field; research and studies, laws and regulations, constructional aspect and Husby.

The companies of today compete about the consumers? attention. In a society where the speed is increasing and the trends are constantly changing the marketing of today will soon be obsolete. This is something that is clearer in the fashion business where the consumers always are looking for news at lower costs. It?s no longer an economical question to be able to wear the latest fashion trends, the availability of cheap fashion clothes is constantly increasing.

Wordpress har använts länge för att bygga webbsidor, från början mest webbsidor där bloggen stod i centrum, men på senare tid även för att bygga mer avancerade webbsidor. Detta är skrivet i första hand för att få ett grepp om vilka fördelar och nackdelar det finns med Wordpress som webbplattform. Dokumentet ska kunna fungera som visst informationsunderlag vid utvecklandet av en Wordpresswebbsida. Dokumentet pekar på problematiken med att ge en kund viss begränsad möjlighet att lägga upp eget material, och ändå försöka säkerställa webbsidans grundkonstruktion och design. Det som gjordes är en Wordpresswebbsida och mall i Wordpress som ska kunna ligga till grund vid utvecklande av nya webbsidor i Wordpress, bägge med en mängd relevanta inlagda plugin, allt för att webbsidan ska ha vissa funktioner som video, bildgallerier, medlemshantering med mera, och en utvärdering om säkerheten i Wordpress..

This thesis describes the redesign ofequipment designed for drying bags thatis used in Fresenius Kabis´manufacturing of their nutritionmedicine in Uppsala. The need of thistask arise during the start of thedevelopment of a new packaging line werethis equipment were meant to be used. Anevaluation of the bagdryers capacity andcapability was necessary.The work started with gathering ofinformation from suppliers of the usedcomponents and from the responsibleengineers for this equipment. Aneducation to learn how the equipmentworked and how to operate it were taken.That was followed by the creation of astudy plan were the tests were plannedto test different parameters effect onthe drying result and to see if thebagdryer managed to handle the bags ofthe correct format in the pace that theequipment should be designed for.The test results detected a need ofdesigning a unit with a function thatholds the bags in place while passingthrough the dryer in order to attainhigh quality results. The results werelater used for optimization of thedesign.

As artificial intelligence (AI) has gained more influence in recruitment, both recruitment processes and the role of the recruiter are changing. This study aims to describe and analyze how recruiters translate, use, and relate to AI in their work. Through a qualitative method based on semi-structured interviews and document analysis, the study explores recruiters? experiences, attitudes, as well as perceived obstacles and opportunities regarding the use of AI in recruitment. With a theoretical foundation in translation theory, fashion, and imitation, the study examines how AI is not only followed as a trend, but also shaped and adapted locally through translation, depending on organizational identity and needs.

The aim of this study is to find a method to incorporate the energydemand of a building in the investment cost estimate.The study is based on an actual apartment block. The significant energyaspects are identified, and changed to more energy efficient options.These are then simulated using the energy calculation program VIP+.The calculated energy need is used in the investment cost estimate, andthe simulated alternatives are compared in regards to their economicalprofitability.Depending on the focus, different alternatives are the most advantageous.Since this study aims to show which alternative is the mosteconomically profitable, the annual profit is the parameter of mostimportance. This means that individual measuring of heating and hotwater use is the recommended change of the original house. A changeof the windows to new ones with a U-value of 1,0 as well as 0,8W/m2K also results in a positive change of the annual profit comparedto the original house..

In this thesis I investigate aesthetic preference for picture books among children aged 3?6 as well as criteria for preference among parents. Through my design project: illustration of a picture book, I aim to put my research on preference in the context of illustration and design. By using the design project as an applied method for research I have sought to answer how one as an illustrator can apply knowledge regarding preferences of the target groups when illustrating for picture books. I have primarily based my research within the field of cognitive developmental psychology, with primary focus on stage theory, and the field of literature.