When grains of wheat and rye are conventionally milled, large quantities of bran classified as by-products are left and are mainly used for animal feed. Bran is a complex material composed of the aleurone layer, nucellar epidermis, a seed coat, a fruit coat and a small proportion of the germ and endosperm depending on extraction rate. The bran fraction consists of approximately 40-50 % dietary fibre which can contribute to increase the nutritional quality of human cereal food. It would also be valuable for the food industry to convert by-products as bran to products with higher commercial values. The aim of this thesis was to analyse the content and composition of dietary fibre of heat treated wheat and rye bran according to the Uppsala method with some modifications in order to analyse soluble and insoluble dietary fibre separately. Half of the bran samples were precooked, dried and roasted and the other half dried and roasted (uncooked).

AbstractThe urgency to find alternative fabrics to conventionally produced cotton is increasing as vast amounts of agrochemicals are used and a lot of irrigation is required. In this literature survey the potential of organic cultivation practices to produce highly qualitative hemp fibre, suitable for the textile industry, was investigated. The definition of a fibre in the textile context as well as of the qualities that are essential for a textile fibre was necessary as a base for the discussion in this thesis. The quality parameters looked at were fineness, strength, length, friction, and colour. The impact of external growth factors and plant development on these quality properties are discussed.

Studien var en del i ett större projekt som syftade till att undersöka hur värphöns påverkas beteendemässigt och nutritionellt av ökad konsumtion av olöslig fiber. I det nu aktuella projektet undersöktes hur ökat intag av olöslig fiber påverkar äggkvalitén. Fiberkällan utgjordes av halmpellets som antingen blandades i fodret med 3 % inblandning, alternativt utgjorde strömaterial för att undersöka strömaterialets betydelse som fiberkälla. Två olika hybrider ingick i försöket, 720 Lohmann Selected Leghorn (LSL) och 720 Lohmann Brown (LB), varav halva antalet av varje hybrid hölls i frigående system och andra hälften i inredda burar. Totalt insamlades och undersöktes 180 ägg från varje inhysningssystem då hönorna var 31-32 veckor gamla.

To produce fine fibre wool as a complement to lamb meat production, Merino and Svea sheep are currently being crossbred in the county of Jämtland. The aim of this study was to evaluate growth and wool quality of the first crossbred lambs. In addition, a literature study about nutritional effects on wool production has been carried out. The literature study showed that fine fibre wool should foremost be achieved through directed breeding. Nutritional requirements of the sheep at different stages of production should determine their feeding.

The EU-project HEALTHGRAIN has suggested a new definition for whole grain which allows a small part of the grain to be removed during processing. By removing the outer part or the grain the hygienic quality will increase but it is not clear how the taste and colour is affected. So therefore in this study three different debranning methods, peeling, pearling and polishing, which remove the outer parts of the grains have been used on common and durum wheat. The dietary fibre and ash content, as well as germination was analysed in untreated, peeled, pearled and polished grains. The decrease in dietary fibre and ash was higher in grains that had been pearled compared to those that had been peeled or polished.

Until the beginning of the 1900:th century the paper making process was handicraft. The paper machines that have been developed since then are as impressing in size as fascinating when it comes to the technique. The process has always been improved to give a better paper for lower costs, with as short manufacture time as possible. Stratified forming has been a reality since 1830. From the beginning it was applied to board and paperboard.

Tritordeum is the result of a cross between a wild barley (Hordeum chilense) and durum wheat (Triticum turgidum). Tritordeum have high viscosity and a nice yellow colour. The objective of this thesis was to evaluate Tritordeum lines HT 354, HT 361, HT 437, HT 2218 (JB3) and HT 1608 (JB1) for use as a new raw material within the food industry. Analyses made were on dietary fibre, fructan, ash, water content and colour. Compilation of data from analyses made for Agrasys an Agri-Food company in Barcelona having the commercial rights to Tritordeum, included Lutein and rheological properties.

The aim of this literature review was to make a comparison between the feeding requirements of Swedish reindeer (Rangifer tarandus tarandus) and meat producing cattle (Bos taurus) within farming. Reindeer are an intermediate feeding type; they have the ability to adapt to short term seasonal changes in food. They avoid eating fibre as much as possible and display highly selective behaviour while foraging. Adaptation to harsh environments with a limited amount of food has made reindeer dependent upon easily digestible food and consequently their digestive systems are less capable of processing plants with high fibre content. Herding is an extensive system which requires a significant amount of land and labour and describes the reindeer industry.

Time of harvest affects nutritional value and digestibility of haylage since plants are in different developmental stages. The aim of this study was to examine the effect of plant maturity of haylage cut in June, July and August on digestibility and faecal particle size in horses.Forage and faecal samples used for the analysis of apparent dry matter digestibility (DMd) and particle size distribution in faeces were from a feed-study performed in the autumn of 2009. Twelve horses were used in the study, divided into three groups in a change-over experiment. Each group was fed haylage harvested in June, July or August during three periods. Faecal grab samples were taken from each horse and pooled so that one sample represented one horse during one period.

Highly polluted urban storm water from e.g. highways can contain large amounts of heavy metals that may cause harm if they are discharged into recipients. To remove the heavy metals a possible low-cost method that does not require much maintenance, could be the use of reactive filters with filter materials consisting of industrial residues or other cheap mineral based materials. Dissolved metal ions are removed by reactive filters through the processes of ions binding to active sites on the surface of the filter materials, or by formation of insoluble precipitates.The ability of CaO-treated granulated blast-furnace slag, iron oxide coated sand, olivine and nepheline to remove seven heavy metals (Cr, Cd, Cu, Ni, Zn, Pb and Hg) from urban storm water was studied. Initially batch experiments were performed where the effect of pH, dissolved organic carbon (DOC) and dissolved ions on the adsorption efficiency was studied.

Chewing behaviour includes both eating and ruminating activity. Chewing behaviour is of great importance for the feed intake as through the action of chewing (i.e. eating and ruminating) animals mechanically process the forages in small particle sizes and prepare the food for digestion. As cattle grow the chewing behaviour changes along with increasing body weight and chewing efficiency is increased. The aim of this thesis was to review the available scientific literature in order to describe chewing behaviour in growing cattle, as well as the factors that affect this behaviour.

The aims with the project were to investigate how forage consumption affect production and pigs behaviour around the feeding. This degree project was designed to follow 48 growing/finishing Hampshire*Yorkshire pigs, from 30-110 kg live weight, fed diets with or without 20 % forage inclusion. The pigs were divided in three groups due to dietary treatment. In the first group the pigs were fed 20 % of the energy in the feed ration by long grass/clover silage (LE) and the remaining 80 % by a cereal concentrate. Group two was fed chopped grass/clover silage mixed with cereal concentrate (HE) in the same amounts as LE.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

The goal of this master thesis project was to develop computer models of some plausiblepretreatment techniques and to assess the potential benefits/costs of using pretreatment andanaerobic digestion for waste management of organic waste from a system perspective. Forthis purpose a computer program called ORWARE has been used. ORWARE (organic wasteresearch) is a program for making life cycle assessments of waste management. As the mainpart of the project work the ORWARE system has been provided with three new models ofpretreatment techniques. The additions consist of: One model of pretreatment with ultrasound,one model of thermal hydrolysis and one model of a screw press.