A new type of device for measuring thev m& ?rate of fuel sprays from a diesel fuel injector has been developed and the various steps in the development are described. The device works by deflecting all of the sprays from the injector at the same time by using a bell shaped deflector. A load cell consisting of a machined steel part with strain gauges mounted on it measures the resulting force. The shape of the curvature in the deflector bell shape has been evaluated by photographing the flow in a 2D?version of the curve shape.

Varje år förlöses barn som är döda vid födelsen, s.k. intrauterin fosterdöd. Antalet barn motsvarar i Sverige c:a tre till fyra per 1000 förlossningar per år. Första juli år 2008 kom registreringen av dött barn vid födseln att få ny innebörd i enlighet med internationell praxis, dvs. gränsen för vad som är ett barn sattes vid 22 kompletta graviditetsveckor.

The project contains a force analysis of the vertical axis wind turbine Lucia's supporting arms and a measuring device to experimentally measure the forces is made. The forces between the supporting arms and the tower are calculated theoretically and then simulated by a computere. A measuring devise is then designed to measure the forces experimentally. The forces acting on the attachment between the supporting arms and the tower is primarily the centripetal force, gravitational force and the aerodynamic forces on the rotor wings. The maximum forces were theoretically calculated and is 13.38 kN along the x-axis, -0.25 kN along the y-axis and then 0.5 kN along the z-axis.

Background: Parents that loose a child in connection to labour are in great need of support.Health care provider treatment and support is of great importance to how the parents will experience something that is doomed from the beginning to be one of the most tragic events the parents will ever experience. For care givers to live up to this it is incredibly important that there are worked out guidelines to follow at these situations.Aim: To chart and describe Swedish maternity wards care program with reference to ?IUFD?.Method: All clinics in Sweden have been questioned regarding care program for handling of ?IUFD?. Care programs has been gathered, charted and described.Results: 87% (29 of 33) off the maternity wards has a plan for treatment and guidelines for ?IUFD?.

The running of gas turbines with low emissions causes high pressure pulsations to arise in the combustion chamber. These pulsations are high amplitude sound vibrations. At some frequencies these are harmful to the gas turbine. Hence these pulsations are monitored to avoid operating conditions where pulsations are specifically harmful. It is necessary to expose the system of known pulsations to verify the functionality of the monitoring process.

The eld of Brain-computer interfaces (BCI) concerns linking together an external device with the brain of a human or an animal. By doing this the conventional use of a mouse or keyboard can be circumvented, which can greatly benefit people with different types of diseases that cause paralysis or other loss of motor control, such as Amyotrophic lateral sclerosis (ALS). A BCI can also be used for cognitive training of either healthy or mentally impaired subjects to increase cognitive capabilities.In this thesis an implementation of an interface is made against such a device, the Emotiv EPOC Headset. The result is meant to be a stable basis for further study using the device. An in-depth study of the history of EEG and its current use in clinical work and research in the topics of BCI as well as Human-computer interaction (HCI) is presented.

Background: Health economic evaluations are becoming an increasingly important means of analysing which care alternative resource utilisation is the most cost effective. It is a new topic in the medical device industry that causes much uncertainty and unstructured use of the actors involved.Study questions: Why is it difficult to develop, implement and disseminate this standardized health economic evaluation models in medical technology? Is there a possibility to standardize health economic evaluations within the medical device industry?Purpose: The purpose of this study is to investigate the standardization issues for health economic evaluations within the medical device industry.Method: A qualitative approach was used in the form of interviews with five actors that are active or have a connection to the medical device industry. The data collection consists of journals, reports, Internet searches and literature among other things.Conclusion: It is possible to standardize, but with certain restrictions such as the county council's budget, influence of industry-specific factors, lack of knowledge and the important interaction between actors..

As new ways of using computers are constantly being developed, other ways of interacting are made possible. One of the most desired types of interaction with computers is a touch-screen where the user can actually organize everything simply by using the fingertips. The purpose of this project is to enhance an existing framework with an application that works with a touch-screen device. The application is to be used as a tool for presentational usage. The result is an application where the user by simple means can use a touch-screen to hold a professional presentation.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

The objective of this study was to investigate how the local newspaper readers felt about reading the local newspaper in a tablet device, such as the iPad. We wanted to study the attitudes from consumers towards tablets and if the traditional local newspaper can be substituted with a tablet device. We decided to use qualitative interviews as our method. The selection of respondents was based upon age, whether or not they had a subscription and if they owned a tablet device or not. We accomplished fifteen interviews with respondents living within the area where the newspapers of Barometern and Oskarshamnstidningen are spread. The study shows that the majority of the respondents who already had a subscription tended to lack interest in changing their traditional newspaper consumption. Their habits of reading the local news on paper were strong.

Construction of an autonomous wind station was a project with the goal of creating a product that could collect wind data from a sensor and then transfer this data to a server wirelessly over the GSM network. The device would be powered by batteries and solar cells and function fully without requiring external power supply. This required that a small computer was constructed and programmed to store and send data at predetermined cycle times and programming of a server that received the sent data. The project also required optimization of power consumption and dimensioning of solar cells and batteries based on this. The construction of this station demanded research both for the selection of hardware and programming software. The computer was based on a microcontroller and a GSM module that sent the data over the 2G network.

In recent years, several problems in the field of assistive device have been lifted. To manage the development Beslutsstöd (Decision support) has emerged as a systematic working method. Beslutsstöd is designed as a guideline and serves as a tool for physical therapists and occupational therapists in the prescription process of assistive devices. Beslutsstöd thereby aims to improve the quality and effectiveness of the prescribing process of assistive device in the organization of the municipalities. An implementation evaluation about how the implementation of Beslutsstöd in the municipalities did proceed has not been done.