Kulturvårdscentrum was a project that had great significance for local folklore societies in Bohuslän.Bohusläns museum was i charge of the project that lasted from 1987 until about 2001 when most ofthe original staff have retired. The staff was mainly recruited from a large shipyard, Uddevallavarvet,at it's closure due to recession. Financing was largely made by the government to help outthose unemployed who otherwise should have a hard time finding a new job. At start there was about25 employees who where trained for one year by staff from Swedish museums, conservation studios,and teachers the university. The education was aimed at serving local folklore societies, and dealingwith their special problems.

The aim of this study was to develop a load prognosis model for Uppsala district heating system to be used as a tool for heat production optimization. The methodwas to build three models for the different customer types; housing, industry andoffices and then scale them for the total system using data from Uppsala districtheating system. The heat load consists of two parts, one that is temperaturedependent and one that is dependent of the social behavior of the customers. Thetemperature part was modelled with an ARX model using an outdoor temperatureprognosis as input signal. The social behavior part was modelled using the mean ofthe social behavior from some days before and additionally by distinguishing betweenweekdays and weekends.

Open source is growing outside the boundaries of hackers, amateurs and software development, creating a humongous potential in many different areas and aspects of society. The intrinsic and extrinsic motivations that drives open source have been in the subject of much research recently, but how they affect each other when paid and unpaid contributors come together is still hidden in obscurity. In this study I investigate how intrinsic and extrinsic motivation correlates with each other and how those correlations affect paid and unpaid open source software contributors. The literature synthesis is based on of systematic reviews through searches in library databases, identification of articles by searching on the Internet and by reading relevant books. My results indicate that intrinsic and extrinsic motivations continuously affect each other and that paid contributors are more vulnerable since their extrinsic motivation in terms of money is reached only when many other motivations are fulfilled.

SammanfattningDenna rapport utreder hur ett pekskärmsanvändargränssnitt kan implementeras på Syntronic AB?s hård- och mjukvaruplattform baserad på ARM Cortex-M3.Ett pekskärmsanvändargränssnitt kräver två system, ett tryckkänsligtsystem för att detektera och positionera när användaren ger input till systemet och en skärm för att presentera ett grafiskt användargränssnitt.Rapporten börjar med att beskriva de tillgängliga teknikerna för pekpaneler och skärmar. Detta syftar till att ge djupare kunskap om de olika teknologierna och deras för- och nackdelar. Denna kunskap används sedan för att i samarbete med Syntronic AB utvärdera de olika teknologierna utifrån Syntronic AB?s krav.

IVL Svenska Miljöinstitutet utvecklade år 2001 ? 2002 i projektet ?Klimat.nu ? Den stora miljöutmaningen?, ett webbaserat verktyg för att upplysa och vägleda individen i klimatfrågan. Verktygets syfte är att kvantifiera fossila koldioxidutsläpp som en konsekvens av individens energikonsumtion; hushållsel, drivmedel m.m. Syftet är även att individen ges råd om hur man minskar CO2-utsläpp genom att förändra sitt leverne. IVL Svenska Miljöinstitutet vill utöka beräkningsverktygets innehåll till att även omfatta konsumentvaror.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Cache simulator is a tool to increase the understanding of a cache memory. Therefore cache memory simulation is included in the course Computer Engineering IS1200 at the Royal Institution of Technology. The purpose of this project is to develop a cache memory simulator for education. The existing MipsIt and Mips Simulator which is currently used in IS1200 has been the main source of inspiration. This resulted in the development of the cache memory simulator LMSim.

With today´s power uprates in BWR reactors the bundle lift force has become aproblem. The lift force is calculated using a best estimate approach and the resultfrom the calculation should pass the existing lift force margin. Lift force margin isdefined so that the lift force may not exceed 80 % of the fuel weight. The margin issupposed to cover all the uncertainties that exist in the lift force calculations.However, no uncertainty analysis has been conducted to quantify the uncertainties.In this report the uncertainties in the lift force model have been quantified. Each inputparameter to the lift force model which has been assumed to have an uncertainty isassigned a probability distribution.

These studies are done in behalf of Saab AB AVITRONICS in Järfälla in the form of a thesis atthe Royal Institute of Technology in Stockholm.The task was to examine the parameters that plays a role in the construction of modern radomesoperating in broadband applications.This was interesting for Saab to get an indication of which way they should go at the newdevelopment of radomes for the next generation of equipment for electronic warfare.After a thorough analysis of the influencing parameters, a optimization application was made toget a automated way to get a radome design by specifying data on the radome size, airloads,materials, etc.This is to minimise the time of the laborious work that radome development.inply.This was solved by letting ANSYS calculate the strength of the radome structure and MATLABcalculate electromagnetic data and cost models of different sizes and materials.All these parameters woven together with the optimization tool modeFrontier picks data from therespective program and perform an optimization algorithm and then iterate a step and sends thisdata to calculation programs for the new input data. In the end, we have received a convergedpoint with our optimal solution.For the presumptions and limitations for which applied for this thesis, the result was prettyintuitive. That is to say that the smaller radome - the less materal is needed and lowermanufacturing costs results in the cheapest solution possible. The reality is not so simple. Whereyou have to take more of the electrical details such as the effect on the transmitter as a majorfactor..

Marinediesel has, to meet there customers needs for a suitable sterndrive to powerboats, developed a prototype. The prototype is currently in the testing phase. The opportunity to test the sterndrive under load inside the workshop has not previously been possible. Until now the drive has been tested in a test bench without any load on the propeller axle. The prototype has also been tested under real conditions mounted on a boat.The idea with my thesis was to create a test bench that can run around the clock in order to be able to test things like wear and service intervals and other things that require that the test interval is long.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Life Cycle Cost, often abbreviated as LCC, is a common tool for comparing the total cost of different alternatives, such as heating and cooling methods. Common heating and cooling methods in Sweden are geothermal energy, district heating and district cooling. This report aims to evaluate how different heating and cooling methods differ from each other while being applied on three different types of buildings, using selected LCC-models. Information about the selected LCC-models wasretrieved from each separate model and its website. Reports and agencies were used as sources for information about the heating and cooling methods.

Title:What influences the assessment of addiction treatment? - Factors that may affect thechoice of interventionsThere are few studies on trauma and the importance of religion for the professional handlingof abuse clients in a Swedish context. It is therefore appropriate to examine the role of suchfactors. This study examines whether experienced trauma in childhood or religious beliefsinfluence the assessment and selection of input in fictitious cases. To examine this created sixvignettes.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.