This bachelor?s degree thesis was conducted in mechanical engineering at Halmstad University during spring semester 2010 in close collaboration with the company Gremo AB, located in Ätran, Sweden. Gremo AB produces, developes and sales forest machines in both Sweden and on the international market.Gremo AB belongs to one of the market leaders in forest industry, especially with their forwarder. In order to become a market leader even with their harvester, the company decided to change the harvester to have a swivel and a leveling driver cabin.The aim with this bachelor?s degree thesis was to develop a design concept for the harvester driver cabin, which Gremo AB can apply on the new harvester.

Den här rapporten undersöker distansutbildningar vid Högskolan i Kalmar, på Institutionen för kommunikation och design (IKD). Dels tas det upp hur IKD jobbar med distansstudier idag men även hur distansutbildning fungerar och hur man kan förbättra denna. Anledningen är att distansutbildningar idag är ett utvecklingsområde där det ständigt händer nya saker. Distansutbildning är kanske på väg att revolutionera sättet på vilket vi idag bedriver utbildning, både i grundskolan och upp till högskola/universitet.Uppdraget kommer från lärarna på IKD som känner att de vill förbättra sin situation. Undersökningen genomfördes med hjälp av etnografiska studier där undervisning observerades och lärare intervjuades.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

The aim of this study is to find a method to incorporate the energydemand of a building in the investment cost estimate.The study is based on an actual apartment block. The significant energyaspects are identified, and changed to more energy efficient options.These are then simulated using the energy calculation program VIP+.The calculated energy need is used in the investment cost estimate, andthe simulated alternatives are compared in regards to their economicalprofitability.Depending on the focus, different alternatives are the most advantageous.Since this study aims to show which alternative is the mosteconomically profitable, the annual profit is the parameter of mostimportance. This means that individual measuring of heating and hotwater use is the recommended change of the original house. A changeof the windows to new ones with a U-value of 1,0 as well as 0,8W/m2K also results in a positive change of the annual profit comparedto the original house..

This thesis has been carried out in collaboration with two students at the Department of Dental Medicine at Karolinska Institutet in Stockholm, Sweden. The aim of this project was to construct a computerized decision support system to facilitate diagnosis of changes in the Oral Mucosa using information collected by the above mentioned students. A program which poses specic questions to the user was constructed with the Java programming language. Depending on how these questions were answered, one or more possible diagnoses were presented by the program. In order to conclude whether or not this program was of any use in terms of time savings, a series of tests were run and timed both when using the program and when not.

The purpose of this report is to outline the development of a dynamic Microsoft Silverlight application, which will be able to present products and be administered in a simple manner. The project has been carried out at Incordia AB, a company that specializes in e-commerce, situated in Helsingborg, Sweden. Although the Silverlight application is customized for a particular site, forMicro AB (an ongoing project at Incordia), the template and the classes that are used to manage information, are developed so that they can be used in future projects for Incordia AB..

The workplace is a good arena for healthy activities because of its ability to reach big target groups. A preventive health care program prevents ill-health and since 2001 Centralsjukhuset Kristianstad has a health care program, ?Främja hälsan?. Leadership is important in the health promotion work when to get the collaborators motivated and involved in the health care program. The aim of the cross-sectional study was to investigate the collaborators opinion about the managers? pedagogical role in the health promotion work at Centralsjukhuset Kristianstad.

BakgrundDynamate Industrial Services (DIS) är en organisation som levererar tjänster till produktions- och tillverkningsindustrin. De arbetar inte uttalat med innovation men intresset och vetskapen om dess relevans för organisationens överlevnad i dagens ekonomiska samhälle ligger till grund för det här examensprojektet.ProblemformuleringUtmaningen är att identifiera och visa kopplingar till teorier om innovation och vilka konkurrensfördelar de ger. På så vis kan DIS uttalat utveckla innovationsarbetet och stå sig bättre på marknaden.SyfteHuvudsyftet med examensprojektet är att tydliggöra de interna processerna på DIS som potentiellt faller inom ramen för innovation och eventuellt ge förbättringsförslag kopplade till innovation. Syftet kopplat till lärandemålen är också att få kunskap och förståelse för innovativa processer och hur dessa tar sig uttryck i arbetslivet.MetodDet empiriska materialet i examensprojektet inhämtades genom en kreativ övning samt fem semistrukturerade intervjuer. Den empiriska informationen har därefter vägts mot den teori som selekterats och är av relevans för denna typ av studie.

This thesis is carried out on behalf of watermixer manufacturer Ostnor AB in Mora.The thesis deals with the area of Article Bound Instructions (ABI) at the company'sassembly department, regarding the layout and management routines involved withthese instructions.In the current situation there are problems with no uniformity in the manner in whichthe ABI is written, then referred to both the civil structure, images and specificityrates in the text.Another problem is that operators do not make use of the ABI that are available inthe current situation, and that there are no clear procedures for who has theresponsibility to write, update and change these ABI.During this work has several people that were identified as key personnel of thethesis held in order to get a handle on how the current situation of the variousobjects of the work looks like, and to examine different desires about the future ofthese should look like from the different subjects perspectives been interviewed.During the work, a number of deficiencies, including that the current program that isused to write the ABI, Lotus Notes, do not possess near the prerequisites for being asimple program to deal with when writing the ABI, which is a condition since wishesare about to put the responsibility for the ABI generation to the departmentsoperators, since their main task is to assemble and do not bother with a program in acomputer.The result of this work has generated new layout and structure of the ABI, designedto be used continuously in the assembly for evaluation, routines regardingresponsibility of the ABI for the Department of Production Engineering (PT),procedures for how the ABI should be written regarding amount of detaileddescriptions in the text and use of pictures.In addition, proposals for further work and improvements has been developed basedon experience during the work and presented at the end of the report..

Title: The customer?s contribution to the innovation-process ? a study of using customers to discover latent needs. Level: Final assignment for Bachelor Degree in Business Administration Author: Robert Klein Supervisor: Agneta Sundström Date: 2014-06 Aim: The purpose of this study is to gain enhanced understanding of what knowledge costumers contribute with in an innovation-process lead by a producer of goods, and how that knowledge is used to fulfill latent needs. The area of research has formerly described which results customer-involvement lead to, but have been scarce in describing how results are produced. Method: From a qualitative onset, a case-study collecting data through observations and interviews capturing customer knowledge contributions, and producer use of fetched knowledge has been conducted. Data has been analyzed using a grounded theory approach. Results have been processed in several steps in which material has been categorized and enriched continuously. Result & Conclusions: Customer-knowledge is broken down into market-knowledge, everyday-knowledge, and specialist-knowledge, which all are significant to a producer of goods.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

AbstractTitle: Wireless Fidelity ? A Scenario Analysis Authors: Mellberg Ola, Technology Management, Lund UniversityMårtensson Jens, Technology Management, Lund University Tutors: Andersson Jens A, Faculty of Engineering LTHKarlberg Johan, Sony Ericsson Mobile Communication ABSvensson Claes, Lund University Discussion: The most significant impacts on the telecom industry over the past decades have been the rapid growth of the Internet and mobile telephone services. Currently these two worlds are converging. Moreover, the fast expansion of wireless high capacity Internet access, increased distribution of local/public hotspots and rapid development of wireless network cards have opened new opportunities for the mobile telecom industry. Research Questions:To what extent could the explosion of local and public wireless networks, using WiFi technology, affect the future telecom industry? Who will ultimately master the WiFi innovation and to what degree could this innovation open new possibilities for external players to enter the mobile voice industry? Purpose: The purpose of the Master Thesis is to provide Sony Ericsson Mobile Communication AB with the most transformational scenarios, which will enable employees to recognise patterns and interpret the meaning of WiFi-related events as they unfold.

The task of constructing a transmission has been provided to us by Digital Engineering, which is a company located in Hovmantorp. After meeting with Digital Engineering we started immediately with the brainstorming to find different ideas with pen and paper. After having presented a number of concepts for the company, we had finally chosen a winner. For the gearbox to be able to work in a good way the tension must never exceed the strain limit of the material. A prototype of the gearbox was produced by TKB Modell.