This study is intended to give an impartial view of a young and complex program in Sweden titled Product Innovation Engineering program. The purpose of this program is to increase innovation capability in Sweden that will result in new companies, patents and economic growth. The results from this study might give some direction to future innovation initiatives, but should primarily serve as a tool for the PIEp participants. The study will focus on investigating the creation of the program as well as the development of its strategy. From weaknesses and strengths within the strategy of the program the study should also attempt to show its future potential.

This study is intended to give an impartial view of a young and complex program in Sweden titled Product Innovation Engineering program. The purpose of this program is to increase innovation capability in Sweden that will result in new companies, patents and economic growth. The results from this study might give some direction to future innovation initiatives, but should primarily serve as a tool for the PIEp participants. The study will focus on investigating the creation of the program as well as the development of its strategy. From weaknesses and strengths within the strategy of the program the study should also attempt to show its future potential.

This study is intended to give an impartial view of a young and complex program in Sweden titled Product Innovation Engineering program. The purpose of this program is to increase innovation capability in Sweden that will result in new companies, patents and economic growth. The results from this study might give some direction to future innovation initiatives, but should primarily serve as a tool for the PIEp participants. The study will focus on investigating the creation of the program as well as the development of its strategy. From weaknesses and strengths within the strategy of the program the study should also attempt to show its future potential.

This thesis has been carried out in collaboration with the IT Company MPQ consulting AB in Halmstad. The task we were assigned by MPQ concerned the development of a scooter that can be used year round. We have with the companydeveloped the criteria and requirements for the product in which the goal is toproduce a primary solution that meets the set criteria and fall within the project'sboundaries.The project involves a wide range of different design methods for idea generationand idea development. The project also addresses engineering methods such asprinciple and primary engineering. Occurringmethods in the project include FredyOlsson principle and primary engineering in cooperation with SVID's - Swedishindustrial design process, etc.The final solution will be presented in the form of sketches, CAD models withassociated drawings and a rendering from the program Keyshot..

When different type of programs are developed one wants to make these adjustable to future changes and requirements. It must be done a good design of the program from the beginning to make it possible to continue development of it without having to redo big parts of it to high costs. In the area of object orientation there are design pattern, which can be used to design systems that can be adjusted to new changes in an easier way. I have in this thesis chosen to take a closer look at how to design a program that sends SMS to cell phones through a system of an operator. One requirement on the program is that it has to be possible to change what operator to send though in an easy way.

During the spring semester 2012 Robin Westlund has accomplished ?Controlled interaction for more creative meetings - Summit Flexiwall? with the individual focus on social communication based on visual interaction in future office. The project was a part of the course Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which includes 22,5 ECTS Credits. The course is a part in the program Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.Assigner of the project was Moelven Eurowand AB with their head office in Örebro. The company manufactures and assembles entire room solutions for offices.

Abstract The purpose of this essay is to find difficulties and risks in the re-engineering process when restructuring to Model-View-Controller (MVC). A thoroughly theory study has been conducted to be able to understand the important steps in the re-engineering process. The methods and concepts of this essay are re-engineering, UML, system development life cycle, design patterns and MVC. The science approach used is design science where the artifact being developed are a set of models.In the analysis phase of the process the system is analyzed. The result of the analysis is notes of difficulties found and models showing the structure of the system.

This thesis is the result of the class Examensarbete, 15 credits of the mechanical engineering program at Halmstad University. The class represents the final part of the program with the aim to attain a Bachelor of Science. It´s a project made during the spring 2014 in collaboration with Alutrade AB and ScanBox Thermo Products AB.The assignment is to develop a new transportation trolley for ScanBox. The aim is to complement their range with a product that opens up to new markets. That set new demands for materials and also manufacturing- and assembly methods.

This thesis examines history of the subject of mechatronics and innovation. The main reason tostudy mechatronics from a historical point of view is that it has never been done to a greater extent before. An overview is justified because various definitions have been used over the decades, but nowadays the subject has become more established. Focus in this thesis is mainly on development of the subject of mechatronics at Royal Institute of Technology in Stockholm. Innovation is the other aspect of this thesis.

During the spring semester of 2012 did Petra Hollsten independently a thesis on reducing the environmental impact of capsule for coffee, tea and chocolate. The work was performed at Karlstad University, Faculty of Technology and Science under the Bachelor of Science program in innovation, technology and design. The project's scope is at 22.5 points.The employment for this project is the company Löfbergs Lila AB in Karlstad. Supervisor at the Principal has been Maria Herou Wallner and Sandra Lyxell, product managers. Supervisor at Karlstad University is Monica Jakobsson, lecturer and program leader for Innovation and Design Engineering program.

This essay discusses organizational culture and focus on corporate creativity and innovation. The aim is to see which organizational factors that foster creativity and innovation in organizations. The essay will provide answer on how organizational culture can encourage creativity and innovation and how organizations can promote the rise of a creative work environment. The research design of this essay is a qualitative case study with interviews at Gotland Energi AB (GEAB). The interviews provided insight in factors that can foster creativity and innovation in organizations.

The project was based on a request to improve an already existing program and hardware at the electrical engineering department at the royal institute of technology. For maximum ease of use, tests have been done on students to properly design the program for what it is meant to be used for. These tests have been transcribed and analysed, then brought back to the group in a discussion and then transcribed and analysed again, I call this process the ?four step process? (this process is presented and explained in chapter 6.4.). A part of this master thesis was also to analyse the four step process to enhance validity of this research.The project resulted in a new program with a new graphical view and features to help students and researchers to work with the technical tool for electromagnetic readings of planar objects.

This report is a bachelor thesis work in the field of product development and design. The assignment has been to develop a solution for roof racks, normally used for cars, to fit on the open trailer models FS1425 and Alugance. The project was implemented by Johan Andersson and Victor Karlsson, students at the Mechanical Engineering program with a focus on product development and design at Jo?nko?ping?s school of Engineering, in spring 2012.The client wants to use transport solutions in the same way as roof racks on cars. The user of such a product is assumed to desire simplicity, safety and an attractive design with an appealing price, which has been a challenge during the thesis work.Pre-studies have been conducted to examine the potential competitors and gain knowledge in the research area.

The Sister Kenny Research Center is part of the Sister Kenny Rehabilitation Institute locatedat the Abbott Northwestern hospital in Minneapolis, USA. The Sister Kenny RehabilitationInstitute provides rehabilitative services, treating more than 70,000 patients a year.The Sister Kenny Research Center strives to optimize the service to patients by nurturingnew innovations in rehabilitation care and treatment. Research projects are conducted ininterdisciplinary so-called Clinical Innovation Teams. As the Sister Kenny Research Center isrecently started, it did not prior to this thesis project have a design process or structured way ofworking in design projects.The outcome of this thesis project is a comprehensive innovation strategy package with a set oftools to enhance the innovativeness at the Sister Kenny Research Center. The strategy packageconsists of three interlinked parts:?A design process adapted to the work environment at the Sister Kenny Research Centerensuring projects are conducted in a structured and innovative manner.?An Innovation Handbook describing the design process to the Clinical Innovation Teamsand providing step-by-step guidance to designing.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.