Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Companies today need to be more focused than ever on having an active Human Resource Management culture. This is not only because of the companies? concern for their staffs wellbeing, but for the companies? effectiveness in the long run. The reward systems which many corporations use today, to both keep their employees and attract new ones, is a well researched subject by scholars as well as journalists. Earlier research has suggested that it is important to implement an active Human Resource Strategy.

This master thesis covers the development of an automatic tuning process for the existing speed controller for drive systems. The drive systems are resonant two-mass systems where a motor is used to drive a load connected by a shaft. The developed method relies heavily on system identification and the construction of a complete mechanical model of the process. With this approach, the common problem with poor load speed control that derives from measuring only the motor speed can be addressed and solved for a majority of such processes.The automatic tuning method has along with general test functions been implemented in a complete tool for automatic tuning, testing and performance evaluation and reporting for drive systems..

The forestry companies? operational planning process is these days dependent on reliable, efficient and user-friendly computer-based support systems. This study is an evaluation of Holmen Skog's current computer-based systems. The aim of this study is to: ? investigate the work pattern of the production managers when using the information system to plan the harvesting operation; ? investigate the efficiency and user friendliness of the information system with the different work patterns and to find the strengths, weaknesses and bottlenecks in the current system; ? find out if the type of object, the volume, the area of the harvesting object affects the time and work pattern; ? examine how this type of study is met by the employees and what factors that is critical to avoid feelings of intrusion. The conclusions of the study were: ? there is a large variation between the work patterns of the production managers and the time spend to perform the operational planning; ? the mainframe computer system used by Holmen Skog is clear, has short response times, is robust and conveys relevant information; ? the computer systems are however divided in many subsystems.

In past decades information technology has changed the conditions of organizations, not at least within the industry. Advanced IT systems have become a fact in order to cope with rapid changes in the market and to effectively manage an organization?s knowledge. When organizations became more flexible and customized expectations from customers and stakeholders also become higher. These expectations and guidelines are documented in a company?s management system, which can be designed differently depending on what standards the company chooses to implement.

The health care sector is one of the most information-intensive institutions in Sweden. Big investments in information technology have been made to ensure efficiency and quality within organisations in health care. This has led to high requirements in documentation and resulted in an increase in administration which gradually more often is done by nurses and doctors. A major problem is that it is difficult to gain access to the information recorded in all the different systems, which is their objective. This causes double documentation instead of being a support in follow-up performance.

Building Automation Systems in commercial buildings are often designed and installed by different contractors, using equipment and components from different manufacturers. The lack of an accepted communication standard has resulted in a few different standards. Many manufacturers of building automation systems only support one, a few or none of these standards, while developing proprietary system solutions. Regin, who develop such equipment, are planning to adopt an open communication protocol specially designed for building automation - BACnet. As a step in that direction this thesis was announced with the purpose to investigate the possibility to implement BACnet in one of their products and to gain more knowledge of the BACnet protocol.

The purpose of this Bachelor?s thesis was to examine the information needs of the international students at the University of Borås. A further aim was to examine the types of information sources the international students was using to satisfy their information needs and the environmental factors keeping them from achieving this. This was done through focus group interviews with international students from four different countries ranging from the ages 20 ? 35.

This study aims to investigate how small scale manufacturing companies reason around an implementation of a PLM-system, as well as the suitability of these systems compared to larger companies. The study is built on a qualitative method. Initially, secondary data was gathered through books, articles and reports. Primary data was gathered through four interviews. Two interviews were performed with PLM resellers, one interview was performed with a PLM developer, and one interview was performed with a small scale manufacturing company that opted to not implement a PLM-system.The results imply that overall differences between larger and smaller companies exist in regard to the need of PLM systems.

Computer based Information Systems play an important role in modern military combat vehicles. The crew needs to be able to quickly get information about both the vehicle and its outer surroundings in order to quickly make the correct decisions. In this report, we describe the development of a prototype new information system for the BvS10 vehicle, manufactured by BAE System Hägglunds AB in Örnsköldsvik.An important aspect of the system is the time it takes from the point that the information is generated by the vehicle sensors until it is presented to the user. The system must be able to ensure that it never displays information that is out of date. Thus, it is important to create a layer and component based architecture for the solution, making it possible to control, in detail, the information?s age as it moves through the system.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

The municipalities of Sweden have a great responsibility when it comes to adapt the physical planning to a more sustainable development. The development of the society depends upon the growth of new communities and other public services, but to build new communities in a long-term sustainable manner you need good methods and guidance. This study presents four sustainability certification scheme intended to improve and adapt the planning, implementation and performance of new communities and infrastructure project to more sustainable methods based on economic, ecological and social sustainability. These systems are the latest versions of environmental classifications and similar rating schemes, but with a broader focus since they also include the social aspect of sustainability.This study aims to investigate what role sustainability certification schemes can play in local planning for sustainable development. The study compares the certification systems criteria to the tools and goals that the Swedish municipalities have been provided with, to lead efforts towards a more sustainable society.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.