More frequent and intensified rainfalls are expected to occur due to climate change in the nearfuture. This together with a higher proportion of paved areas increases the pressure on today?sstorm water systems (Risinger, 2014; Boverket, 2013; Stahre, 2006). Traditional storm watersystems (i.e. underground pipe systems) have during last decades started to be questioned(Olshammar & Baresel, 2012).

The purpose with this project is to explore and verify three renovating systems for Miljonprogrammet (common expression forbuildings constructed during the years 1965-1975 when over a million houses where built in Sweden) to take measure to thelargely transmission losses of these buildings. Many of the buildings from this period have similar constructions and thereforethe same techniques can be used to renovate several of them. This project only considers the climate scale, although thereare many more factors to concern for to efficient the buildings of Miljonprogrammet.This thesis presents examples of renovations carried out using two of the three renovation systems.The essay presents a reference house of choice on which we apply the three systems and calculate the new U-values,consumption of energy and the investment costs. The new U-values the building is given is matched to the values ofrecommendation for passive houses. Our reference house is a two story apartment building, located in the village ofLammhult, with brick facades at the ends and plaster at the long sides.

In the last couple of decades, corporate law firms have rapidly grown to become both influential and highly profitable corporations in the business world. Today, the largest law firms are assumed to bear far greater resemblance to large and often multinational public limited companies than the small businesses generally associated with legal services. However, one interesting specific set them apart from the majority of other companies; the partnership and its interrelated profit sharing. The aim of this study has therefore been to investigate partner compensation systems in corporate law firms and further examine what implications chosen compensation systems have on the organizations. Using a multiple case study, including 7 of Scandinavia?s largest and most well known law firms, the results show that partner compensation systems are highly individual and the critical question is whether to employ seniority based or performance based compensation systems.

Tidigare ombesörjde organisationen karriär och karriärutveckling för den anställde och karriärkontraktet byggde på livslånga anställningar. Det nya karriärkontraktet bygger istället på en så kallad proteisk karriär (Hall, 1996), vilket utmärks av att individen ser sig själv som ansvarig för och drivande av sin karriär, att egna värderingar får styra samt att psykologisk utveckling är främsta mål. Studiens frågeställning var att undersöka om personlighetsfaktorer i termer av self-efficacy, självkänsla, locus of control samt neuroticism kan predicera proteiska karriärattityder. I studien användes kvantitativ metod och en enkätundersökning genomfördes på studenter. Korrelationsberäkningar visade att samliga personlighetsfaktorer samt proteiska karriärattityder var korrelerade.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

Test bench for air bearingsThis thesis work consisted of bringing forward and defining the test parameters relevant for a test bench and constructing a test bench that can test and verify the largest existing air bearings that are of use in Micronic Laser Systems AB machines. Because the knowledge about air bearings is limited it is thought that with the help of the test bench the knowledge would increase and in that way improve the air bearings.After learning more about air bearings and their purpose at Micronic Laser Systems AB, I started the concept phase for the test bench. For each part in the test bench I consulted my two tutors, Torbjörn Hedevärn and Johan Bergqvist, at Micronic Laser Systems AB. The final concepts where documented as 3D-modells in Solidworks and some of them have been tested in Solidworks FEM-program.The test bench is designed so that, with the help of a pneumatic cylinder, 25 kilo weights are placed on the air bearing to test its stiffness, damping and the pressure performance under its surface area. To test these parameters the test bench has to have a pressure meter, accelerometer and a microcator.

SELF CONTROL är ett undersökande examensarbete i textildesign. Med en textil hantverksmetod undersöker jag mötet mellan kontroll, tidsåtgång och material. Detta med utgångspunkt i en feministisk diskurs. Jag ser kontroll som något som exkluderar, censurerar och begränsar möjliga uttryck inom textilt hantverk på samma sätt som kvinnokroppen kontrolleras i ett patriarkat. Jag har använt mig utav en performativ och repetitiv metod som aktivt har gått ut på att bryta mot föreställningar om hur hantverket ska utföras.

Today there are many applications of digital terrain models (DTM) and the requirements of low uncertainty increases. Most of the DTM are produced with Global Navigation Satellite System (GNSS), terrestrial laser scanning (TLS), airborne laser scanning (ALS) and total stations. Guidelines for the preparation and verification of DTM are found in Swedish Standards Institute ? Technical Specifications (SIS-TS) 21144:2007 and SIS-TS 21145:2007. These were defined in collaboration between Swedish National Rail Administration, Banverket, and Swedish Road Administration, Vägverket, to satisfy the needs of requirement formulations in the production of DTM planning, design and construction. The purpose of this paper is to produce and control DTM over Åkermans kulle, located west of the University of Gävle, according to SIS TS 21144:2007 using GNSS with network-RTK, TLS and ALS.

This study investigates the corporate sustainability activity, linked to the company's core business, which is a relatively unexplored field in a Swedish context. The study examines how the organization has used management control for its sustainability activity within two social initiatives; and whether these initiatives have generated value for the organization and involved stakeholders. Management control of social initiatives are examined within the theoretical framework of The Sustainable Balanced Scorecard and the organization's value creation contributions are outlined in accordance with a definition of the concept of Creating Shared Value. The method used for the implementation of the study is a qualitative study, embodied in an illustrative case study of a large Swedish company operating within financial sector. The empirical data was collected through 12 in-depth interviews with representative interviewees within the organization and with other stakeholders involved in the company's social initiatives.

Scholarly publishing has since the introduction of electronically distributed periodicals seen a time of change, mainly in the STM-business (Science Technology and Medicine). The roles of the three main participants in the publication process; researcher, publisher and library are developing into new directions. Researchers themselves are taking a more active part in the discussion, with the boycott list from the Public Library of Science organization as an illustrating example. Reforms are being launched partly as an economical and efficiency issue, partly as an increasing desire from researchers to maintain the control of scientific end result. This Master s thesis examines how the partly conflicting goals of the participants affect the conditions for scholarly publication in an electronic environment.

The world is changing and the business context is no exception. One of the clearest tendencies is a tougher business climate with harder competition due to increased international trade and the expansion of the e-business. At the same time the customers are becoming more sophisticated and demanding. The last decades have also meant that tougher and more frequent demands are being aimed at the businesses from a wider variety of stakeholders; demands regarding how environmental issues, social responsibilities and business ethics should be dealt with. All of the above have driven companies towards implementation of different management systems to be able to cope with the demands as well as to ensure that these issues are being dealt with in an efficient and effective manner.

The task of this project was to build an computer processing system for pressureregulation, in which the pressure loss over the open hydrolicvalve should be kept as low as possible. By using an cross connected proportional directional valve the valve problem could be solved. The control- and regulationproblem for the pressureregulation system was solved by using the DAQ- card NI6035E from National Instruments and the computerprogram Automatic Pressure Control 1.0 which has been software developed and written in Visual Basic. The final result showed that correct processvarible was obtained in 0,5 seconds, when the setpoint was changed in the testarea 0 - 2,5 MPa..

This study aims to investigate how small scale manufacturing companies reason around an implementation of a PLM-system, as well as the suitability of these systems compared to larger companies. The study is built on a qualitative method. Initially, secondary data was gathered through books, articles and reports. Primary data was gathered through four interviews. Two interviews were performed with PLM resellers, one interview was performed with a PLM developer, and one interview was performed with a small scale manufacturing company that opted to not implement a PLM-system.The results imply that overall differences between larger and smaller companies exist in regard to the need of PLM systems.

This study focuses on the internal marketing and how it affects the complaints by companies? communication control. Our purpose with this subject is to increase the understanding of which components affects the relation between internal marketing, communication control and complaints. We have chosen the subject, internal marketing because it caught our interest in an earlier course. On the basis of the literature of costumer complaint there have not been so much research about it and that is why we have chosen this perspective on internal marketing.This study is based on a qualitative approach.

According to the basic values of the Swedish Trotting Association the horse and its welfare should always be held in highest consideration. One part of the animal welfare work in the organization is to ensure good horse management practices by controlling all active trainers through the local licensing committees situated at the Swedish racetracks. The Swedish Board of Agriculture stated that high quality animal welfare assurance programs used by the industry organizations can be used in the risk assessment of the official animal welfare control to make the official control work more effective and the ambition of the Swedish Trotting Association is to establish an animal welfare assurance program which may be approved by the Swedish Board of Agriculture. Racehorses are exposed to welfare hazards both in their management as well as during training and racing and factors like handling, training, feedstuff, stable environment, medication and the possibility to express natural behavior all affect the welfare of the horses. The aim of the project is to investigate and evaluate the animal welfare work performed by the licensing committees and to give advice on how to improve the industry?s animal welfare control.