Sökresultat:
257 Uppsatser om Infill wall - Sida 5 av 18
MCNP-modell för beräkning av neutrondos och DPA på reaktortanken vid Ringhals 2
In this report an MCNP (Monte Carlo N-Particle) model is described for the reactor vessel at Ringhals 2. The model is validated against the specific activity in neutron dosimeters, extracted in 1977, 1984 and 1994. The validation showed that the calculations of the model are within the requirements of a maximum of 20 percent uncertainty for every neutron dosimeter except one, extracted after the first cycle. The uncertainty of this cycle was mostly due to the operation data rather than to the MCNP model.The model has been used to investigate various questions concerning radiation damage. The reliability of the traditional measure of radiation damage, fast neutron flux (En > 1MeV) has been evaluated. This has been done by taking the ratio for this and another measure of radiation damage, DPA (Displacement Per Atom), for various positions and layers.
Resultatet av 150 års samlande : en dokumentation av Gästrike-Hälsinge nations konstsamling
There is an old saying, that after Epaminondas nothing was ever the same again. In this thesis I will focus on three questions: "Epaminondas the man." Who was he? "Epaminondas the general." How did he change the technique of warfare that made it possible to beat the Spartans? "Epaminondas, founder of cities and wall-builder." How did he build the walls around the cities he initiated, that made them resist enemy attacks for many years to come?While seeking the answers to yhese questions I will make a contextual analysis to get the historical background to all the phenomina involved..
Hvitoren - så får Ni tvätten ren och vit : en kvantitatif undersökning af nystafning och gammalstafning i tidningstext och annonser
There is an old saying, that after Epaminondas nothing was ever the same again. In this thesis I will focus on three questions: "Epaminondas the man." Who was he? "Epaminondas the general." How did he change the technique of warfare that made it possible to beat the Spartans? "Epaminondas, founder of cities and wall-builder." How did he build the walls around the cities he initiated, that made them resist enemy attacks for many years to come?While seeking the answers to yhese questions I will make a contextual analysis to get the historical background to all the phenomina involved..
Brottsskeden kring infästning av stålpelare
En utfackningsvägg är en icke bärande väggkonstruktion, ofta av trä som har för syfte att minimera energiförbrukningen för byggnader i betong. Inuti konstruktionen används ibland stålpelare för att bära ovanliggande konstruktioner. Stålpelarna utsätts för laster som de måste dimensioneras för. Över och under pelarna svetsas plåtar fast för att öka den belastade arean och hindra brott i betongen.I detta examensarbete har därför en datormodell i programmet Excel framtagits. Modellen dimensionerar kantpelare i stål enligt Eurokoderna.
Standardisering av förpackningar på HABO AB
This thesis project has been written and accomplished in cooperation with HABO AB. The objective of the project was to develop a standard stated packaging system. The background to this is that HABO is not pleased with the system currently in use. The system which HABO is currently using consists of to many sizes. The largest benefit of a standard stated system is that it becomes much easier to organize the packaging with the aid of a computer program.
Land of the dead : Mer än bara zombies
Vår uppsats kommer beröra Zombies på film och fokusera på filmen Land of the Dead. Många människor upplever zombies som inget mer än monster, en fara för karaktärerna att klara sig undan. Vi vill uppmärksamma att all populärkultur i varierande utsträckning gestaltar verklighet, och analysera hur Zombies används för att gestalta aspekter av vårt samhälle..
Energiförbrukning för putsade, odränerade träregelväggar i fuktigt respektive torrt tillstånd
In recent years, moisture damages have been noticed in rendered, undrained stud walls. The design is built on the principle one-stage tightening which means that there is no air gap in the construction. The damages have occurred when water has permeated through the rendering in leaking connections and fittings for windows, doors, canopies, balconies, terraces and awnings. Behind the plaster carrier, which consists of either polystyrene or rigid mineral wool, plasterboard has often been used as a wind protection barrier. In many cases the wind protection barrier and the underlying wooden studs have been exposed to mould and in some cases even rot.
Integrering av ekodesign i produktutvecklingsprocessen hos Blå Station
Eco-design is all about improving products environmental performances throughout the products lifecycle by including the environmental aspect into the product development process. There are a large number of different tools that can be used for this, but there are several factors that can affect which one will be the best to use. Some tools for eco-design takes comprehensive studies and can only be performed by experts, while some tools can be used more time- and cost efficient and with basic knowledge. The choice of tool should be based on the company?s situation.This report describes the research of how the design and furniture company Blå Station could include a tool for eco-design in their product development process.
Epaminondas : Strateg och stadsgrundare
There is an old saying, that after Epaminondas nothing was ever the same again. In this thesis I will focus on three questions: "Epaminondas the man." Who was he? "Epaminondas the general." How did he change the technique of warfare that made it possible to beat the Spartans? "Epaminondas, founder of cities and wall-builder." How did he build the walls around the cities he initiated, that made them resist enemy attacks for many years to come?While seeking the answers to yhese questions I will make a contextual analysis to get the historical background to all the phenomina involved..
Buller : Hur planeras en bullerfri stad?
Milosevic, S. 2014. Buller ? Hur planers en bullerfri stad?. Kulturgeografiska institutionen, Uppsatser, Uppsala universitet. This essay is about noise pollution caused by urbanization.
?Allt du behöver göra nu är att stå där och låta mig kolla på dig? : En genus- och ekokritisk analys av två tecknade filmer utan mänskliga huvudkaraktärer
Vi lever i ett samhälle som präglas av tydligt uttalade och outtalade föreställningar kring hur män och kvinnor ska vara och se ut. Dessa föreställningar lär vi oss redan som små barn, genom såväl föräldrar som vänner och även den media som ständigt omger oss. I tv och film presenteras ständigt stereotypiserade bilder av män och kvinnor, ofta i miljöer som ytterligare förstärker det stereotypa budskapet; till exempel starka män i mörka och farliga miljöer och vackra kvinnor i ljusa och varma miljöer. Eftersom media är en så stor del av elevernas vardag valde vi att genom en kvalitativ textanalys undersöka hur genus skapas i två filmer för barn där mänskliga karaktärer saknas, samt undersöka huruvida olika miljöer används för att förstärka intryck. Utifrån ett genus- och ekokritiskt perspektiv analyserade vi sedan filmerna Bilar (2006) och Wall-E (2008).Genom vår analys har vi kunnat dra slutsatsen att genus skapas tydligt även i kontexter där mänskliga karaktärer saknas, ofta med hjälp av olika miljöer som används för att förstärka olika stereotypa budskap.
Konsolidering av v?vsp?nda papperstapeter: analys och metodutveckling
Printed and painted wallpaper on a weaved fabric backing was a common way to decorate homes in Sweden during the eighteenth and nineteenth centuries. Not much is written about the craftsmanship in relation to the hanging of these wallpapers and even less about the conservation of the objects. Even so, many wall segments remain in situ and in museums and are more often than not in dire need of conservation such as deacidification and consolidation. These are composite objects, consisting of cellulose materials with different properties along with adhesives and paints. Analysis of the materials is required to ensure safe handling and choice of conservation materials, and to establish a treatment plan which will be executed in several steps.
This thesis aims to identify these steps and develop a method for conserving the wall segments with suitable materials, preferably without altering the source material to any significant degree.
En social rörelse och finanspolitiska problem : En studie av två grupper inom Occupy-rörelsen
I dagens värld har länder ett tätt sammanlänkat ekonomiskt samarbete. Detta innebär att ifall ett land drabbas av en finanskris, kommer även andra länder att falla likt dominobrickor, in i en väntande finanskris. Just detta skedde år 2008 och 2011, då ett flertal av världens länder drabbades av en stor finansiell kris. I skuggan av dessa kriser växte en social rörelse fram vars syfte var att uppmärksamma människor om vad som, enligt rörelsen, egentligen hade hänt. Rörelsen som växte fram är känd som Occupy-rörelsen.
Skårby : En kultplats med lång tradition
The ancient site of Skårby, situated about twenty kilometres south of Stockholm, includes one very large cairn enclosured by a stone wall with a small cairn attached to it. Cairns are originally thought of as graves, but resent research shows that they are more likely to have been religious objects. The constructions are seated on a small hill with a view over the lake Bornsjön which used to be a bay of the lake Mälaren. This place has been the object of worship throughout the whole Bronze Age. Over the years the manifestation of the worship changed, but the place for it stayed the same..
3D-modellering i AutoCAD -att skapa en digital huskonstruktion
3D-modelling in AutoCAD This thesis is done in cooperation with LB-Hus in Bromölla, and have aimed to establish a digital AutoCAD model of one of the company?s house types and to find out what opportunities there are to do visualisations in the form of images directly from the programme. Modeling has been carried out so that the very construction of the house is included. Interiors and installations, with the exception of the ventilation system, have been left out in the model. The model has been created with solid models after a comparative study made between solid models and surface models to find out which option in this case was the easiest to handle and took up the least space.