Every year the Swedish government invests capital in different projects. In recent years the Swedish government has chosen to invest in design. The reason for this is that the government wants industry to use design as a competitive source. Two organizations, Svensk Form and Stiftelsen Svensk Indistridesign, have been assigned to improve industry and society?s under¬standing of design.

As the football industry develops into a highly competitive commercialized industry, football clubs must step up and improve their business strategy. This study focuses on the famous Italian club AC Milan, a club with many international titles but with declining revenues. The purpose of this thesis is to study how AC Milan can generate higher revenues by comparing its marketing and business strategy with the most profitable clubs in the world, the benchmarking partners Real Madrid and Manchester United. By using a benchmarking model, following the five steps of this process, conducting observation studies, an interview and examining secondhand information, gaps between the clubs were evaluated and analyzed. These evaluations became together with chosen theoretical references, the basis for the improvement suggestions and conclusions shown by the authors.

The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

The automotive industry is today in a world of globalisation and external factors can influence the car companies and it is important that they progress with the people. When an external factor, as the oil price, increases dramatically, it will affect the economies in different matters. Other external factors are impacted by the oil price, for example inflation, unemployment and target rates. In addition, people are changing their preferences due to the attention of the environment. With this as the foundation the problem of the essay were divided into three aspects.

The purpose of this essay has been to examine the public`s view of the Swedish eldercare during 2006. This study uses discourse analysis as a research method, the reference material has been articles from the newspaper Dagens Nyheter. The aim of the research has been to find central themes, conflicts and consensus in the discourse of eldercare. The analysis resulted in four main subjects which were based on four main questions; the questions of responsibility and execution, the question of contents, and the question of where the eldercare should take place. The analysis of conflicts and relations of consensus in the discourse of eldercare resulted in two different main views; the traditional and a more modern.

This project has been created with the assistance of Fredells. Fredells is a Stockholm based company with a focus on the retail of building products. Fredells also produces prefab- or prefabricated products which are either completely or partially ready for assembly the moment they arrive to the building site. These prefab-products are primarily delivered to customers within the Stockholm region. The building industry is a conservative market where the incentive to changes has been relatively low compared to other industries.

Today, maintenance is a big part of the daily life on board ships. It is also one of the bigger expenses a shipping company has and without any loss of quality tries to run as economically advantageous as possible. In the hunt for economical savings the shore-based industry has subsequently applied the use of condition based maintenance, CBM, were a component is maintained according to its actual state. This leads to a reduction of maintenance costs since no parts are unnecessarily replaced. However, within the maritime sector a periodical maintenance is still the most commonly used maintenance system.The purpose of this paper is to chart the factors that are the reason for the low implementation of CBM on board the Swedish merchant fleet's ships.

This thesis examines a sample of Pitted Ware pottery from the Gotlandic site of Ajvide in regard to the spatial and temporal relationship of the shards. Ajvide Stone Age site have been extensively excavated over the past 25 years and the most recent analysis of pottery was carried out by Inger Österholm in 1987 and new analyses of the material are therefore greatly needed. Pottery from three sample areas was analysed in regard to their distribution, decoration, fragmentation, part of pot and quality of the goods. To analyse the material in a contextual way a multivariate statistical analysis called correspondence analysis was used. Two areas denominated ?dark areas?, which Österholm defined previously, as possible ritual sites, and one reference area with mixed material were chosen for the analysis.

Introduction: Every year about 450 women in Sweden are diagnosed with cervical cancer, almost 200 die and thousands undergo surgery because of cell changes in the cervix. A HPV infection can lead to cervical cancer and therefor costs for the society. The implementation of a vaccination program against HPV is a way to avoid these costs. Aim: The study aimed to calculate the economic impact of the HPV- vaccination program for children in Sweden through a cost-benefit analysis. Method: In this analysis, status quo was compared with non-administration of the HPV-vaccine for the selected cohort of ten-years-old girls in Sweden.

In the construction industry today there is a significant technological revolution goingon. New methods for automated processes and information management are developedcontinuously. Intense studies are currently taking place to ensure ways and means toembrace the new technology of BIM.At the present, environmental certification systems are considered cumbersome andchallenging. However, the increasing demands of sustainable development in the constructionindustry imply that the environmental certifications will not disappear. ThisMaster Thesis examines the possibilities to apply BIM technology within the field ofenvironmental certifications to streamline the processes.The applications that provide the best opportunities are:- To use BIM to be able to, during the design stage, dynamically evaluate the resultor score a certain building will achieve.- To avoid unnecessary work through collection of data for calculations directlyfrom a BIM-model.- To be able to automate certain time consuming calculations that are currentlyperformed manually.- To automatically examine the completed model to ensure that the demands arefulfilled.The possibilities to use BIM within these areas are however limited by the technologyitself.

When grains of wheat and rye are conventionally milled, large quantities of bran classified as by-products are left and are mainly used for animal feed. Bran is a complex material composed of the aleurone layer, nucellar epidermis, a seed coat, a fruit coat and a small proportion of the germ and endosperm depending on extraction rate. The bran fraction consists of approximately 40-50 % dietary fibre which can contribute to increase the nutritional quality of human cereal food. It would also be valuable for the food industry to convert by-products as bran to products with higher commercial values. The aim of this thesis was to analyse the content and composition of dietary fibre of heat treated wheat and rye bran according to the Uppsala method with some modifications in order to analyse soluble and insoluble dietary fibre separately. Half of the bran samples were precooked, dried and roasted and the other half dried and roasted (uncooked).

Lately, more and more music festivals have emerged in Sweden. People?s desire and need to visit these events only seems to increase. Cultural tourism and music tourism has developed into a significant and important part of the experience industry and it employs more and more people within the tourism industry. The purpose of this paper is to investigate which effects this can have on the local community.

This paper deals with archaeological prospecting for the purpose of finding a prehistoric settlement in Alsike hage, Alsike parish, Uppland. The methods being used are soil phosphate analysis, electromagnetic survey and settlement analysis. Two 20x20 meters areas have been prospected. As Alsike hage contains several late Iron Age burial fields, large splendid zones for settlement location, closeness to water as well as farmland there was a hope of locating remains of prehistoric settlement in the area. None of the prospected areas showed any distinct evidence of settlement remains.

This report consists of  an anlysis of the imapct of a dam failure at Tjärnviksdalen in Ragunda, Sweden. The analysis is conducted using the EU model for environmental impact assessments, as well as a group interview. The presentation of the results in the form of a map  where the water level has been raised to the level that the County Board  of Jämtland considers to be possible in case of a dam failure.The result of this work is a detailed analysis of the consequenses that a dam failure would cause, the result consider everything from the direct consequences of the water column to an analysis of the chemical changes that the water would undergo.Parts of the analysis have shown that the purification centre and the old deposits will have the biggest impact on Hammarstrand. Both the purification centre and the deposits will realise chemicals to its nearest environment and because of the flooded purification centre the city will not have the ability to clean the water. .

In this essay I have studied Aftonbladets portrayal of the Swedish businessman Jan Stenbeck and if the reporting changes before and after his death, and if so, in which ways. With help from a qualitative syntax analysis and a content analysis I studied my material about Stenbeck during the time period 2000-09-19 to 2004-09-19. In my quantitative analysis I studied 140 articles and in my syntax analysis I studied ten articles, five before and five after Stenbecks death. The theoretical perspectives that I applied in my study is Sigurd Allerns theory about tabloid papers novelty criteria and Adam Shehatas theory about Framing. Allerns theory describes what criteria the tabloid papers have on news and Shehatas theory about framing describes the political forces behind the news who wants to set their own agenda.