This study was conducted on behalf of SCA forest AB, Västerbottens forest administration. Timber procurement from non-industrial private forest owners has become an increasingly important part of SCA:s wood supply. The objectives of this study was to report the current forest conditions in the private forests in the county of Västerbotten, analyse the potential for procurement of wood from private forest owners, and provide a basis for decisions on future strategies for timber procurement from private owners.Material and data have been collected from different sources, mainly from Swedish National Forest Inventory and SKA-VB08. This material was the basis for the analysis and calculations performed with the Heureka application PlanWise. This study area was divided into six different analytical areas (Coastal south, Coastal middle, Lycksele, Inland south, Inland north, Skellefteå), where each area of analysis is represented by a number of municipalities.In this study, two scenarios were specified; one describing the current forest management with current harvesting levels and the effects of these assumptions, the second to illuminate what potential there is for future timber harvesting.

Syftet med offentlig upphandling är att konkurrensutsätta marknader och skapa bästa möjligaaffär för de offentliga medel som den upphandlande myndigheten har till sitt förfogande.Offentlig upphandling ska ske med långsiktigt perspektiv och det finns verktyg för att tillse attett långsiktigt synsätt erhålls. Ett av dessa verktyg är livscykelkostnader (LCC) som beaktaren produkts anskaffning, ägande och avveckling. En produkt som har ett högtanskaffningsvärde men låga framtida kostnader, kan bli det mest kostnadseffektiva inköpet.LCC används för att göra en ekonomisk värdering av olika investeringsalternativ,diskonterade över produktens livslängd. Livscykelkostnader är ett synsätt som utforskar deolika investeringsalternativen och används aktivt för att föra en dialog mellan aktörerna iupphandlingsprocessen.Användningen av livscykelkostnader, kan antas vara till god hjälp för beslutsfattarna i vattenoch avloppsbranschen (VA) om de vill ta långsiktigt korrekta beslut. Problematiken är attingen har kartlagt hur ett livscykelkostnadsverktyg påverkar beslutsprocessen i offentligaupphandlingar inom VA-branschen och om det ger beställaren ett tydligt beslutsstöd.

This report covers a product development project conducted as Bachelor of Science thesis forthe Innovation & design engineer program at Karlstad University.The assignment was supplied by MMB Consulting, Kristinehamn. The purpose of this projectwas to find an alternative way of shaping wire-net insulation mats. This insulation product isused for fire and thermal insulation of technical installations. The insulation consists of stoneor glass wool with a sewn on steel wire netting on the out facing side. This netting has thepurpose to enable fastening to e.g.

Både under min tidigare utbildning, främst inom nationalekonomi vid Lunds universitet, men även senare i min yrkesutövning inom bygg- och fastighetsbranschen under en period av 15 år, har jag främst kommit i kontakt med problemställningar vilka i någon mån haft som syfte att utmynna i en slutsats med kvantitativ relevans. Då jag som del av programmet Urban utveckling och planering skulle skriva en uppsats på D-nivå, ett arbete som resulterade i förevarande rapport, valde jag därför en problemformulering och en metod som båda gav mig möjlighet att bredda min kompetens, snarare än fördjupa den. Denna studie strävar efter att utveckla en teori för stadsutveckling ur ett fastighetsföretagarperspektiv. Den specifika situation som arbetet fokuserar på är stadsdelen Norra Sorgenfri i Malmö. Teorin har genererats med användning av metoden grundad teori och datorprogrammet Atlas/ti. Läsaren finner förhoppningsvis att den teori som utvecklas har en allmän relevans för stadsutveckling och hur kommunens planarbete kan förändras. Den som är intresserad av just vitaliseringen av Norra Sorgenfri bör också kunna finna något av värde.

Abstract Project as a method was defined in the American defense industry in the 1950´s and has since then developed to encompass many different areas such as industrial management, administration, research and development and IT etc. In the cultural sector project is a common way of organizing work and within theatre, which is the focus of this study, one can claim that project as a form of work has been used for hundreds of years, if not by definition.Theatre is generally assumed to be an form of art representing creativity and innovation, highly demanding from an individual perspective relative to the project result, i.e. the final performance. Time pressure, fierce competition, limited resources and responsibility to deliver on time with high quality are natural conditions given.The aim of the study is to find out what circumstances and conditions affect and have a clear impact on motivation and creativity in those working professionally within theatre.This study is based upon qualitative interviews with a limited number of employees with different occupations, within a major publicly-funded Swedish theatre institution.Contemporary research indicates both intrinsic and extrinsic motivation as essential for how we experience and commit ourselves to our work, either as two separate forces but also as they interact.Extensive studies further state our individual experience from work, the conditions provided by the organization and social environment as crucial to our work performance. A positive experience from these factors enhance our motivation and creativity.The results of this study show theatre to be an activity supported by strong visions and clear goals where challenge and creativity are essential and where it´s members show strong commitment to the task whether they are beside or on the stage..

Abstract The purpose of this project is to develop a modular processor card which is intended to work as a platform for Kitron Development Karlskoga. The modular processor card is meant to be used as a control system in development projects, mainly in medical and industrial products. The processor card will consist of a central unit with the basic functions for a control system. Furthermore there will be complete modules with machine commodity and programming, to pick exactly the necessary functions for a specific application. With consideration to the specification of the development and the main unit, I chose an adequate microprocessor (AT90CAN32) as core and interface circuits to stated border areas. The construction is first completed in the program MultiSim and then remade in the program OrCAD Capture. The programming language C was used in the software model.

Purpose: The aim with the report is to investigate if the South East Asian customer on the food processing market base their investments on Total Cost of Ownership and if so, which are the cost drivers considered most vital. Moreover, do these cost-drivers diverge from the perception FP Ltd has, and if so, can a Total Cost of Ownership-model help to achieve a mutual understanding? Methodology: First a descriptive approach will be taken, identifying FP Ltd?s employers? perception on how to meet the customer. This will later be compared to our empirical findings of the actual customer behaviour in Thailand and Vietnam. Thorough analyse of the gap between the two parts will give us the outcome whether or not FP Ltd will have any use of presenting a quantitative model justifying their higher price.

Spectacular buildings and categorized districts are becoming more common elements in cities. In many cases, they are the result of city branding, which means choosing a city image and dealing with it like a brand to profile and compete against other cities. This essay study what impact on and roll in urban planning the trend might have. The first part relies on literary studies and describes what has been written about city branding. The globalization, the experience economy, urban management, urbanization and the theory of the creative class are pointed out as driving forces of the popularity and the spread of city branding.

This paper presents the result of a master thesis project at 30 Hp, master of industrial engineering at Luleå University of Technology. The project was performed during 20 weeks, spring 2014, in collaboration with ABB Control Products in Västerås. The aim of the project was to evaluate two half-automated assembly lines for a new generation of contactors, the NAFC assembly lines (New AF Conductor). The aim and purpose of the project was achieved by answering the following questions:? How are the ergonomic working conditions at the NAFC assembly lines during spring 2014?? Which areas at NAFC assembly lines can be improved for the work environment?? How can the ergonomic work conditions improve at the NAFC assembly lines?Literature reviews were performed from earlier research papers and articles of the ergonomic, musculoskeletal and work environment subject, from where a number of chosen methods and tools were used to perform the ergonomic evaluation.

Research question: How does the industrial company Scania work to get more women in leadership positions?Purpose: The purpose of this work is to describe how companies in a male-dominated industry can work to get a higher share of female leaders.Method: This survey was based on a deductive approach with a qualitative method. Theories have been obtained primarily from scientific articles and the empirical part has been collected through interviews from the companies Wiminvest and Scania.Conclusion: The conclusions the study came up with was different elements that companies in male-dominated industries can work with to get a higher share of female leaders. The first thing that companies can do is to join the project BON or similar projects to work on this issue. They can work with workshops and lectures to disseminate knowledge about the topic.

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

AbstractThis degree thesis was made in cooperation with Chematur Engineering in Karlskoga.Many of the environmental issues of today are a result of the motor traffic. Consumption of fossil fuels harms our environmental through formation of carbon dioxide and other greenhouse gases. To get under control with our environmental issues it?s important to find substitutes for oil that are both cheap and environmentally friendly. Ethanol has a long history as a motor fuel and is both enviromentally friendly has a high efficiency.According to the EU commissions directives for motor fuels, 5, 75 % of all the fuels in Sweden should be renewable in 2010.

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

Background and problem: There is a continuous debate regarding incentive programs in public companies. Since the global financial crisis and the subsequent recession in 2008, the criticism has reached even higher levels. Various regulatory authorities as well as influential external actors require stronger regulations and limitation of the monetary compensation in publicly held companies. Share-based payments are based on the development of the market value of the company. This means there is an existing relation between the owners? and the managers? interests.

Perfluoroalkyl substances (PFASs) are ubiquitous in the environment today and they have been detected even in remote areas such as the Arctic. PFASs can be transported by the atmosphere and ocean currents but the transport mechanism is not fully understood. PFASs may be harmful to organisms due to their persistence in the environment, bio-accumulation potential and toxicity. Studies have shown that PFASs can cause adverse effects on the metabolism as well as the endocrine- and reproduction systems in organisms. In this study, PFASs were investigated in glaucous gull (Larus hyperboreus) (n=5) and black guillemot (Cepphus grylle) (n=4) from Svalbard.