In many clinical applications, it is desirable to transmit sensor information wireless. In earlier research, investigation transmit ECG signal using Bluetooth, was performed. However, when Bluetooth has some drawbacks it is of interest to investigate alternative methods, one such method is ZigBee. Bluetooth has higher data rate speed (1Mbps) than ZigBee (250kbps). However, Bluetooth consumes more power.

The credit rating industry is a complex and fascinating industry. Its history stretches back more than 150 years and has gradually increased in importance. During its history the dynamics of the industry have changed. The extended-principal-agent model was developed by synthesizing different principal-agent-relationships into one model. This model provides a holistic understanding of the credit rating industry and illustrates the interdependence between the different relationships.

 Abstract  Interest in Lean grows and spreads to the public from industrial and service sectors. Lean is currently used in administrative processes and it is called Administration but can administration be Lean? The aim of our study is to develop a useful model for a successful implementation of Lean Administration by using various scientific articles, books and information from the case study.The part of the purpose is to: ? Identify critical success factors that arise? Identify the challenges arising from the implementation of Lean Administration.We have studied a Division within Distribution at GE Healthcare in Uppsala. The model that we have developed provides challenges and success factors for a successful implementation.In order to succeed in implementation, a culture that promotes continuous improvement must exist in the organization. A key success factor is to understand Lean Administrations structure and principles.

The aim of this study was to investigate emotions and emotion regulation of a downsizing in an industrial company. The sample consisted of persons who had experienced a downsizing but have kept the employment, within a same position or being transferred to another one. Data consisted of two focus group interviews, analysed by an inductive thematic analysis. The results have indicated that emotional reactions changed over time as well the emotional regulation did during the different phases. The groups differed in emotional reaction related to the time of decision regarding the retention of employment.

The construction industry is currently receiving much criticism for inefficiency and slow development while demands for reduced built in moisture and efficiency increases. This report examines whether the use of field factories can meet these requirements and what factors that will be critical for future use of field factories. Industrialized construction with field factory is compared with traditional loose timber construction and industrial construction in the fields of execution, logistics and working environment. The aim of this report is to provide a basis for field factories current and future use and development. To achieve the aim of the report, people with experience in the use of the various methods was interviewed and literature studies in the various fields done.

Stenebergs sockerbruk is a large log-timber construction, purpose built as a sugar refinery in 1739 and is one of Sweden's oldest industrial buildings constructed entirely out of wood. Despite receiving the status of a listed building (in Swedish: Byggnadsminne) in 1977, there exists today a surprisingly low amount of documentation of the building itself. In order to enhance the existing and lacking building documentation, this case study aims to shed light on the building's log-timber built frame, focusing on how it was constructed, how the long lengths of its walls were handled and what type of joinery and tools were used. A thorough investigation of the building is conducted on site, followed by gathering of information which is then presented through text and illustrations. The findings indicate the orientation of timbers, location of joints and scarfs as well as tool marks which together contribute to the forming of a basis of understanding of the building's construction..

The Anybus CompactCom modules are today using the Anybus NP30 processor. These modules are used for communication between industrial machines and larger network protocols. The communication loads on these systems are increasing every day and the limiting factor for the system is the processor.HMS, the company that develops the Anybus CompactCom, has shown interest for a benchmark test between the old processor and a new processor, ARM Cortex-M3. This project includes that benchmark. To be able to get results that reflect reality a test environment was created to simulate Anybus CompactCom conditions.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

Abstract: The purpose of this study was to examine the Swedish industry- and craftmanship trade, specifically the relationship between effort and reward and how it affects the meaningfulness during labour hours. Also, what are the possible effects on production efficiency as a whole? Discussed and analyzed through empirics and previous research.38 workers filled out a survey and two interviews were conducted to get a more analytic depth to the data.The results showed that there is little to no reward for high effort during labour hours on the evaluated workplaces, combined with low commitment and meaningfullness. My conclusions are that more ways of effort-based rewards would likely have a positive effect on meaningfulness and thereby the production as a whole. I also show that the theses of Karl Marx are still plausible and relevant in modern day industrial- and craftsmanship trades in capitalist countries..

SammanfattningDynaMate AB, som är ägare av DynaMate Industrial Services, är ett fristående helägt dotterbolagtill Scania CV AB. Bolaget startade sin verksamhet 1993 och då inledningsvis som enunderhållsavdelning inom och åt Scania. Under första halvåret av 2001 ombolagiserades dockDynaMate AB för att kunna erbjuda produktionsstöd även till andra kunder. Under 2009 bildades såDynaMate Industrial Services AB (DIS), där detta företag idag erbjuder specialkompetens inomautomation, el och mekanik. Med stöd av företagets kompetenser och erfarenhet av produktionsstödlöser de kundens problem från idé till färdig maskin.I Scanias regi har DynaMates uppdrag oftast vilat på enskilda konstruktörer, som då agerat bådeprojektledare, genomförare och slutförare.

This degree project summarizes five years of education at the landscape architecture program at the Swedish University of Agriculture Sciences, SLU, Alnarp and the School of architecture at Royal Institute of Technology, KTH, Stockholm. The project has been carried out by Lovisa Berg and Per Crona in collaboration with DRIFT Scenkonst. This master project is based on the ongoing transformation of a former mining site in Ställberg, Bergslagen situated in central Sweden. The organization DRIFT is in the process of recreating to former industrial mining site as a green cultural center. Their field of artistic examination concerns existential questions connected to the site. The aim is to offer a place for both performing and experiencing contemporary performing arts in Bergslagen. Our objective is to contribute to the growth of the performing arts project and to demonstrate in concrete terms how a conversion of a mining area can be completed, while taking into account both its history and its new function.

In the faster growing pace of changes and competition in the global economy, factors promoting group effectiveness are of interest. How do components of leadershipstyle, especially transformational, team climate and selfefficacy correlate? To answer this question 3 questionnaires regarding leadershipstyle (MLQ), team climate (TCI-Short) and selfefficacy (self developed) were distributed to employees of a Swedish installation company (108 participants). Moderate positive correlations were found between climate and selfefficacy and between varying elements of leadership and selfefficacy. The leadership behaviour Contingent Reward correlated moderately with all climate dimensions and strongly with selfefficay.

This reportcommunicates the processes and results of my degree work in industrial design at candidate level at Umeå Institute of Design.During my degree work I had a cooperation with Svenska Jägareförbundet (Swedish Hunters Assosiation).The aim for my project has been to explore how I could make hunting a safer hobby and undertaking. Every year people get seriously injured and in average 2 people a year dies  due to hunting accidents. My goal is to identify problems within the hunters communication and approach. Through a creative design process I will find a valid  nd realistic solution to these problems. My project will be presented as a conceptual solution  hat will be based on currently existing technology.

The essay describes the bachelor project by Marie Hanås, in collaboration with Skälsö Arkitekter. Skälsö Arkitekter are currently developing an area in the north of Gotland, Bungenäs; previously home to lime stone quarries and military bases.The brief was to design a set of outdoor furniture to complement the new development. The main effort of the project was in designing furniture that would fit the environment visually but construction issues were a major secondary concern, to ensure the easiest possible manufacturing. A reference group of coastal house owners were interviewed, and their feedback, together with an analysis of functions, trends and target groups, were the base for the ideas.Of the five concepts presented, Skälsö Arkitekter chose one to develop further. This was done through sketches, models and 3D models and led to the final result which is lightweight furniture of Gotlandic pine wood with an industrial touch.

Energy is today a very common topic, not only in Sweden but in the whole Europe. In EU they have given out a directive 2002/91/EG about buildings energy use and throw this they have forced their members to show how much energy their buildings use. In Sweden has the gouvernment established a law (SFS 2006:985) about energy declaration for buildings which demands that the building owner needs to show how much their buildings energy consumption are. Important to know is that this law doesn´t applies for industrial buildings.The report will show what the new law about energy declaration for buildings and appurtenant directions will mean for Riksbyggen. Also energy calculations will be done to be able to compare Riksbyggen buildings with the new law and directions.