Today, buildings utilize 40 % of the total energy consumption. New energyrestrictions and directives have entered the construction industry. Photovoltaic is asustainable, clean and quiet solution that integrates well in the urban environment buthave not yet reached a breakthrough on the Swedish market. The conditions for solarenergy production are often set in the early planning stages where they rarely arebeing prioritized.This master of engineering project focuses on identifying problems regardingimplementation of photovoltaic in city development projects and giving suggestions topossible improvements in the planning- and construction process. It also givesrecommendations on how the conditions for energy production can be optimized inthe early zoning stage.By conducting simulations with PVsystV5.21, on three ongoing city developmentprojects in Umeå, Malmö and Stockholm and by carry out and analyzing interviewswith city planners, constructors and architects, some conclusions have been made.Several improvements, both politically, with changes in the subsidization systemand/or instatement of a new law with feed-in tariffs, and within the solar- andconstruction industry itself, with better communication between different parts of theprocess as well as better use of experience, can be made.

The study investigates questions and considerations emerging when stone in historic buildings needs to be replaced. The focus is on the surface treatment of stone in sandstone façades in pre-industrial buildings. That means buildings constructed by traditional methods and craftsmanship without the use of modern technology.The research issue originates from the extensive stonework that is planned for the façades of the Stockholm Palace. The project includes the replacement of large quantities of damaged stone to newly cut stone. This raises the questions about the use of modern and rational methods for surface treatment on the replacement stone.

Insufficient intake of vegetables is a reason for micronutrient deficiencies and malnutrition in developing countries. With urbanization, globalization and a growing world population it is of major importance to secure sufficient food supply for the world?s population. Part of the solution to increased food security among the world?s poor could be the introduction of vegetable home gardens, plots for small scale vegetable production which can provide households with sufficient vegetables as well as serve as an extra income source. The study Improving peri-urban home gardens aims at examining the existence of vegetable home gardens in the peri-urban areas of Hyderabad, India.

Subclinical mastitis (SCM) is a well-known problem in the dairy sector, where it causes severe economic losses mainly due to reduced milk production. This is a problem not only in the western world but also in developing countries. Surveys from different developing countries have shown a SCM prevalence of 52.4 ? 88.6 % at cow level and 26.7 ? 63.2 % at quarter-level. To combat mastitis is important to optimize the milk production of the cow.

Title Becoming involved in the planning process - from the construction workers perspective.University/Institution Halmstad UniversityKeywordsEmpowerment through participation, construction workers involvement in decision making in the planning process, knowledge management and communication in the planning process, partnering, human resource managementAimThe aim of this bachelor thesis is to provide knowledge and examine how construction workers perceive involvement in the planning process of partnering projects, what they can contribute and what they get out of the planning process.Methodology The study was conducted with a qualitative approach in the form of semi-structured interviews.          The interview studie consist of 10 interviews with construction workers who are specially educated in participating in the planning process at the company ByggDialog AB.ConclusionAll respondents are positive to be involved in the planning process. The main advantages they can see is that they are able to influence technical solutions and methods that will be used later on in the production. Therefore it is important to consider when construction workers should be involved in the planning process so that they get the chance to influence in this decisions.When it comes to the decision making the construction workers should be involved in the decisions that are related to their tasks in the production such as technical solutions, choice of methods and materials. Their main duties and working hours should be in the production.Involvement in planning does not automatically mean that the construction workers are involved in the decision making, it is up to them how much they participate.

Examensarbetet utfördes på NCC Halmstad under våren 2010. Syftet med examensarbetet var att klargöra vad visuell metodik kan tillföra byggbranschen och hur det upplevs av personer som utför byggprojektArbetet innefattar en kvalitativ och en litteraturstudie. Den kvalitativa studien genomfördes med hjälp av sju intervjuer inom Region Syd med personer som arbetat med den visuella metoden NCC Projektplanering. Intervjuerna har ägt rum för att ta reda på hur den visuella metodiken fungerar i praktiken.Litteraturstudien innefattar en utredning av begreppen Lean, Lean Production, Lean Construction, Last Planner och NCC Projektplanering. Den röda tråden från Lean till NCC Projektplanering är att genom ständigt förbättringsarbete skapa engagemang och ökad delaktighet.Den generella uppfattningen av NCC Projektplanering är positiv, dock varierar uppfattningen av metoden efter aktörernas inställning.

Gunsta is situated about 10 km east of Uppsala. Today there are plans to establish 1000 new households in Gunsta before year 2030. The required energy for heating houses and water would be distributed via a district heating system, which also includes 200 existing residences. The annual required energy, according to this study, would be 16.2 GWh with a maximal peak effect of 6.9 MW. To meet this need, the study suggests a system with heat pumps to upgrade the 31?C water from a 1.8 kilometre deep borehole.

Swedish agriculture faces future challenges regarding food production and land use. Increased competition for agricultural land creates complex situations, where conflicts may arise when productive crop land is in demand not only for food production but also energy- and fodder production. On top of that there is an obvious conflict of goals between agricultural production and non-agricultural exploitation of agricultural land. In several emerging economic regions it is noticeable how agricultural land is being expropriated for development of urban settlement and infrastructure, carrying potentially significant long-term effects. During the last decade the exploitation of agricultural land in activities other than food production has increased in Sweden and is expected to continue in the same manor. Approximately 700 hectare of land in Sweden is diverted from food production, annually, and in 2013, the Uppsala Municipality showed the greatest change in land use of all municipalities (SCB, 2013).

The purpose of this paper is to examine how the target to convert the Swedish military aviation industry towards working within the civilian sector was planned and implemented parallel to the target of building a world-class military aircraft. A number of Government bills have been studied, bills directly connected to the JAS-project as well as bills dealing with civilian project ?s for the military aviation industry. The first group includes bills dealing with the JAS-project ?s role in the overarcing defence policy, as well as the Government ?s bill specifying the guidelines for the JAS-project.

The public sector is a major purchaser of goods and services. By setting requirements for environmental and social considerations in public procurement, an authority has the possibility to use consumer power to influence the actors in a market. The purpose of this paper is to investigate public procurement of textile products in a municipality, in order to gain knowledge about factors that may be important for the use of environmental and social criteria. Håkan Hydén´s (professor in sociology of law) norm model was used as the basis of the analysis, where the conduct was investigated along three dimensions of the norm ? willingness, knowledge and system conditions ? in order to identify underlying factors that can influence the process.The results ? analyzed by using interviews and documents ? show that the procurer's willingness, motivation and knowledge are important factors in this context, as well as the political priority of the municipality.

Tumble dryers and drying cabinets have to a large extent replaced the traditional way of drying clothes outdoors. They are faster, more convenient, require less space and can be operated regardless of weather conditions. This replacement has significantly increased residential energy consumption, due to the fact that tumbles dryers consume large amounts of electrical energy. In the USA 9 % of the households electric energy is consumed when drying clothes. Over 4 million tumble dryers are sold in Europe each year and 20 % of the residential electricity consumption in Sweden is used drying and washing clothes.

Being an architect I create spaces with roof, walls and fl oor. The availability of the essential materials to create such spaces is practically unlimited. The materials also play a significant part to the character of the created space. I hope to contribute to the general understanding of materials as elements in the design of urban spaces by having intensely explored one specific material in depth, pointing out its bad and good qualities. I am of the opinion that the reason for choosing a material shouldn?t be because of a shortage of knowledge, facts or references, but what character you want for the room. When travelling across Europe, it sometimes feels like clay paving is everywhere, but back in Sweden it is almost unseen of in modern landscape architecture.

Inspection errors are nowadays usually written with pen and paper during building inspections. A company in Stockholm is developing a method by which inspections are made digitally from the beginning and where the inspection attachments shall be stored in a database. The idea of this method is that entrepreneurs can use the database to get an experience feedback from previous surveys so that they can improve their production processes. One problem that occurs is how inspection errors will be sorted into the database. They have to be sorted so that contractors or clients can use and sort out the information in a sensible way when they want to evaluate and make improvements in their production processes.This thesis examines how the inspection errors can be sorted in a structured manner.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

The art of producing films have been around for more than a century and the technology just continues to evolve. But although much has happened in 100 years, there are also processes, theories and practices that look the same now as then. I write this thesis because I want to find the differences between the analogue and the digital way of production. This study is based on a qualitative approach because my ambition is to seek the views concerning film production processes. The advantages of analogue film is that it contains more information than the digital formats and that it has a more cinematic style.